ICOM orporated 387802 UHF DIGITAL TRANSCEIVER User Manual

ICOM Incorporated UHF DIGITAL TRANSCEIVER FA SC61UC 2

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

Contents

User Manual cut antenna

Thank you for purchasing theFA-SC61UC UHF ANTENNA. Please read these instructionsthoroughly before using theFA-SC61UC.400 MHz420 MHz440 MHz460 MHz480 MHz500 MHz520 MHz 380 MHz360 MHz0Antenna capFA-SC61UCThe optimum bandwidth is ±8%of the tuned frequency.For optimum performance tuneto the center transmit frequencyof the radio.Cutting InstructionsqAlign the bottom of the anten-na onto the 0 position of thecutting guide diagram at left.wMark the antenna at thelength corresponding to thedesired frequency to betuned.FA-SC61UC A-6532K-1EX-wPrinted in Japan© 2006-2009 Icom Inc.eCut the antenna to themarked length.• Use a wire cutter that cancut at least 1.2 mm (d) ofpiano wire.rApply adhesive to the top ofthe antenna and attach thesupplied antenna cap.• Use of Cemedine Co.Super-X No. 8008 black(Icom parts number:8950002910) or similar isrecommended.Antenna CuttingChartNOTE:Antenna cap must be inserted after cutting the element otherwise water immersion makes the element damaged.Center frequency(MHz)Length (mm)185175165156148142136129125360380400420440460480500520CAUTION:Making antenna cuts at other than the prescribed lengths specified could void the user's authority to operate the equipment.
Download:
Mirror Download [FCC.gov]
Document ID3490411
Application IDaqnsRGx51h0LrzmYXY3W8A==
Document DescriptionUser Manual cut antenna
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.1kB (101229 bits)
Date Submitted2017-07-31 00:00:00
Date Available2017-10-31 00:00:00
Creation Date2009-05-19 08:41:48
Producing SoftwareAdobe PDF library 7.77
Document Lastmod2009-06-23 16:46:23
Document TitleFA-SC61UC-2
Document CreatorAdobe Illustrator CS2
FCC ID Filing: AFJ387802

Navigation menu