ICOM orporated IC-F621-2 IC-F621-2 User Manual

ICOM Incorporated IC-F621-2 IC F510F520 F610F620

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

Pages 1 to 8 of the Users Manual

iEXPLICIT DEFINITIONSRWARNING! NEVER connect the transceiver to anAC outlet. This may pose a fire hazard or result in an electricshock.NEVER connect the transceiver to a power source of morethan 16 V DC such as a 24 V battery. This connection will ruinthe transceiver.NEVER cut the DC power cable between the DC plug andfuse holder. If an incorrect connection is made after cutting,the transceiver might be damaged.NEVER place the transceiver where normal operation ofthe vehicle may be hindered or where it could cause bodilyinjury.NEVER allow children to touch the transceiver.NEVER expose the transceiver to rain, snow or any liquids.USE supplied microphone only. Other microphones havedifferent pin assignments and may damage the transceiver.DO NOT use or place the transceiver in areas with tem-CAUTIONSWORD DEFINITIONRWARNING Personal injury, fire hazard or electric shockmay occur.CAUTION Equipment damage may occur.NOTE If disregarded, inconvenience only. No riskof personal injury, fire or electric shock.READ ALL INSTRUCTIONS carefully and complete-ly before using the transceiver.SAVE THIS INSTRUCTION MANUAL— Thisinstruction manual contains important operating instructions forthe IC-F521 VHF TRANSCEIVERand IC-F621 UHF TRANSCEIVER.IMPORTANTIC-F510F520_F610F620.qxd 02.1.21 10:03 AM Page b (1,1)
iiperatures below –22°F (–30°C) or above +140°F (+60°C) or,in areas subject to direct sunlight, such as the dashboard.AVOID operating the transceiver without running the vehi-cle’s engine. The vehicle’s battery will quickly run out if thetransceiver is in transmission while the vehicle’s engine OFF.AVOID placing the transceiver in excessively dusty envi-ronments.AVOID placing the transceiver against walls. This willobstruct heat dissipation.AVOID the use of chemical agents such as benzine oralcohol when cleaning, as they damage the transceiver sur-faces.BE CAREFUL! The transceiver will become hot whenoperating continuously for long periods.For U.S.A. onlyCAUTION: Changes or modifications to this transceiver, notexpressly approved by Icom Inc., could void your authority tooperate this transceiver under FCC regulations.TABLE OF CONTENTSIMPORTANT .................................................................................... iEXPLICIT DEFINITIONS ................................................................. iCAUTIONS ....................................................................................... iTABLE OF CONTENTS .................................................................. ii1 PANEL DESCRIPTION ........................................................ 1–6■Front panel ............................................................................ 1■Function display .................................................................... 2■Programmable function keys ................................................ 32 OPERATION ...................................................................... 7–10■Turning power ON ................................................................ 7■Channel selection ................................................................. 7■Receiving and transmitting ................................................... 8DTransmitting notes .......................................................... 8DTx code channel selection .............................................. 9DTx code number selection .............................................. 9DDTMF transmission ........................................................ 9DScrambler function ......................................................... 9DUser set mode .............................................................. 103 OPTIONAL SmarTrunk II™ OPERATION ....................... 11–12■SmarTrunk II™ and conventional modes ............................ 11■SmarTrunk II™ operation .................................................... 114 CONNECTION AND MAINTENANCE ............................. 13–18■Rear panel and connection ................................................. 13■Supplied Accessories ......................................................... 14■Mounting the transceiver ..................................................... 15DInverting the Front panel .............................................. 15DMounting the Transceiver ............................................. 16■Optional UT-105/UT-108 installation ................................... 17■Optional UT-109/UT-110 installation ................................... 17■Optional OPC-617 installation ............................................. 18■Antenna ............................................................................... 18■Fuse replacement ............................................................... 18■Cleaning ............................................................................. 185 OPTIONS ............................................................................... 19IC-F510F520_F610F620.qxd 02.1.21 10:03 AM Page c (1,1)
Download:
Mirror Download [FCC.gov]
Document ID232100
Application IDQRZCrWboPwV9qjB7roR7tQ==
Document DescriptionPages 1 to 8 of the Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize192.5kB (2406294 bits)
Date Submitted2002-03-20 00:00:00
Date Available2002-05-09 00:00:00
Creation Date2002-03-20 09:40:57
Producing SoftwareAcrobat Distiller 4.05 for Macintosh
Document Lastmod2002-03-20 09:41:31
Document TitleIC-F510F520_F610F620.qxd
Document CreatorQuarkXPressª: AdobePS 8.7.2 (104)
Document Author: yasu_matsumoto
FCC ID Filing: AFJIC-F621-2

Navigation menu