ICOM orporated IC-M502 Mobile Marine Transceiver User Manual IC M501

Download:
Mirror Download [FCC.gov]
Document ID	99987
Application ID	W16eVAZhqca5D+l5ulikkA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.53kB (106647 bits)
Date Submitted	2000-05-12 00:00:00
Date Available	2000-07-17 00:00:00
Creation Date	2000-05-04 14:38:38
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2000-05-04 14:38:54
Document Title	IC-M501??
Document Creator	Microsoft Word 9.0
Document Author:	??

IC-M501
IC-M502 Operational Manual
Table of contents
1. Front panel layout
2. Rear Panel
3. Radio operation
Display
Ii
Readout and operation
III
DSC operation
Iv
User set mode
-1-
IC-M501
1. Front panel
USA Model
DISTRESS
SP
POWER
VOL
POS
TAG
DW U/I/C
DSC/ENT
SCAN
CH/WX
16
DIMMER
IC
HI/LOW
LO/DX
SQL
SEL
-2-
IC-M501
Name
16
Operation
Silk Print
Repress once
16
Holding for one sec.
Function and Operation
Recall CH16
Recall
Repress 16 with holding
HI/LOW button
CH/WX
SCAN
Editing CH name
Repress once
CH/WX
Toggle between user CH and WX
Holding for 1sec.
DW
Start/Stop Dual or tri watch
Repress CH/WX with
holding HI/LOW button
U/I/C
Selecting USA, INT or CANADA mode
Repress once
SCAN
Start/Stop normal or priority scan
Holding for 1sec.
TAG
Tag or un-tag channel for scanning
Repress SCAN with
holding HI/LOW button
Repress once
HI/LOW
DSC/ENT
Clear all tagged channel with holding those buttons
HI/LOW
Switch output power between 25W and 1W
Holding for 1sec.
No function
With Holding HI/LOW
button
No function
Repress once
DSC/ENT
Selecting DSC call menu and selection
Holding for 1sec.
POS
Display LAT/LON and time
Repress DSC with
holding HI/LOW button
Repress once
LO/DX
Holding for 1sec.
No function
LO/DX
Turning on/off
IC
Repress LO/DX with
holding HI/LOW button
Repress once
DISTRESS
SELECTOR
CH9 or reprogramming CALL CH when CH 9 is
selected
Holding for 5 sec.
ATT on receiver
Turning on/off
intercom
Turning on/off
scrambler
No function
DISTRESS
Transmitting distress signals
Repress DISTRESS with
holding HI/LOW button
No function
Turning knob
Selecting CH
Turing Dial knob with
holding HI/LOW button
Adjusting dimmer
POWER
Repress
POWER
Turning on /off the radio
VOLUME
Turing knob
VOL
Adjusting receive audio
SQUELCH
Turning knob
SQL
Adjusting SQL
Turning on the radio with holding CH 16 will select radio setup mode
-3-
IC-M501
Europe Model
16
SP
TAG
DUAL
POWER
VOL
DIAL
SCAN
CALL
DIMMER
HI/LOW
SQL
SEL
-4-
IC-M501
Name
CALL
Operation
Silk Print
Function and Operation
Repress once
CALL
Recall CALL CH
Holding for one sec.
Reprogramming CALL CH
Repress CALL with
holding HI/LOW button
Editing CH name
Repress once
DIAL
SCAN
DIAL
Holding for 1sec.
No function
Repress DIAL with
holding HI/LOW button
Selecting USA, INT mode
Repress once
SCAN
Start/Stop normal or priority scan
Holding for 1sec.
TAG
Tag or un-tag channel for scanning
Repress SCAN with
holding HI/LOW button
Repress once
HI/LOW
HI/LOW
Switch output power between 25W and 1W
No function
With Holding HI/LOW
button
No function
DUAL
Start/Stop dual or tri watch
Holding for 1sec.
No function
Repress DUAL with
holding HI/LOW button
No function
Repress once
DIMMER
Clear all tagged channel with holding those buttons
Holding for 1sec.
Repress once
DUAL
Switching to user CH mode
Holding for 1sec.
DIMMER
Selecting Dimmer level
DIMMER
No function
Repress DIMMER with
holding HI/LOW button
Repress once
16
SELECTOR
Turning on/off
16
scrambler
Recall CH16
Holding for 1 sec.
No function
Repress DISTRESS with
holding HI/LOW button
No function
Turning knob
Selecting CH
Turing Dial knob with
holding HI/LOW button
No function
POWER
Repress
POWER
Turning on /off the radio
VOLUME
Turing knob
VOL
Adjusting receive audio
SQUELCH
Turning knob
SQL
Adjusting SQL
Turning on the radio with holding CH 16 will select radio setup mode
-5-
IC-M501
2.Rear Panel
Panel
USA Model
1. NMEA input jack (Pig Tail)
2. Speaker output jack (Pig Tail)
3. Socket for remote control unit
4. DC power cable (Pig Tail)
Europe Model
1. Speaker output jack (Pig Tail)
2. Socket for DS-100 (DSC unit)
3. DC power cable (Pig Tail)
-6-
IC-M501
3. Radio Operation
i.. Display
Following words are showing on display
TX
BUSY
CALL
Transmit indicator
TAG
The BUSY indicator
shows
radio
has
incoming
receive
signals
RF
output
power
indicator
Call channel indicator
SCAN
DUAL
WATCH
TRIWACH
CAN
USA
INT
Mode display
WX
ALERT
Blinks during scanning
Blinks
watch
Blinks
watch
during
during
dual
tri
DUP
Shows duplex channel
SC
Scrambler indicator
LOCAL
Receive ATT on
It shows DC voltage is
less than 10 V
CH display It
shows
current
7seg
selected CH
Internal speaker is
SP OFF
off
Low Battery
WX alert display
Tagged CH indicator
-7-
IC-M501
Ii Display and operation
1. Transmit and receive readout
20
20
20
20
16
09
-8-
RX with SQL close
RX with SQL open
TX with high power
TX with low power
CH16 is selected
CALL CH is selected
IC-M501
2 Operation mode readout
Repressing CH/WX button while holding HI/LOW button
20
20
20
3 DUAL / TRI watch
Radio setup mode selects DUAL or TRI watch
20
20
4 Scan
The radio comes with four different scanning modes, Normal scan, Normal scan
with WX alert, Priority scan and Priority scan with WX alert, and you may
select them from setup mode
When you repressed UP or DOWN button, the radio will pause scan
If you repress UP or DOWN button again, the radio will display tagged
channels, then the radio will resume scanning
-9-
IC-M501
During pausing scan, holding SCAN button for 1 sec. will un-tag the channel,
and will resume scanning
20
20
10
10
5 WX channel
Blinks
6 LAT/LON display
Holding DSC/ENT button for 1 sec will display position
Repressing other button will cancel this mode
’
’
20
20
20
- 10 -
GPS connected
Position error from GPS
No GPS receiver is connected
IC-M501
7 Internal Speaker off
It shows that internal speaker is off
The radio was turned on ATT, the readout shows LOCAL instead
20
8 receive attenuator (Harbor mode) indicator
To eliminate interference at harbor, you may turns on the attenuator on the
receiver
20
9 low battery indicator
LOW BATTERY indicator shows up if supplied DC voltage is less than 10.8V.
This will warn the operator to let him or her know the low DC supplied voltage
to the radio
20
- 11 -
IC-M501
Blinks
10 CH name editing
For USA version, repressing 16 button while holding HI/LOW button will
enter CH name editing mode
After in the CH name editing mode, you may select cursor position by
repressing SCAN button or CH/WX button, then you may select desired
character by main dial knob
After you finish editing CH name, repress 16 button to return to normal
mode
If press other button than 16 button, the radio return to normal mode
without accept any change to the CH name
For European version, repressing CALL button while holding HI/LOW button
will enter CH name editing mode
After in the CH name editing mode, you may select cursor position by
repressing SCAN button or DIAL button, then you may select desired
character by main dial knob
After you finish editing CH name, repress CALL button to return to normal
mode
If press other button than CALL button, the radio return to normal mode
without accept any change to the CH name
20
11 Voice scrambler (Option)
It shows voice scrambler on
20
- 12 -
IC-M501
- 13 -
IC-M501
12 Intercom (Option)
1. To enter the intercom mode, hold LO/DX button for 1sec.
2. If the radio is connected no controller, the radio will sound
error beep, and will not accept entering intercom mode.
3. If radio is in the intercom mode, repressing 16 button will sound
call beep from both radio and controller
4. To return to normal mode, repress IC button again
IC
- 14 -
IC-M501
iii DSC Operation (For USA model)
Format specifier
Distress
Category
----------
All ships
All ships
Geographical
Safety
Routine
All category
Individual
Routine
All ships
All ships
All ships
Distress
Distress
Urgency
Urgency
Individual
Individual
Individual
1st Telecommand
Receive
Transmit
Distress ACK
Distress Relay
Distress
Urgency
Safety
1 Transmitting Distress Call
Removing protective cover and holding DESTRESS button
The radio beep once, and will switch to CH70
The radio is capable to display local time if operator set local offset time from
UTC
Local time display
’
’
UTC display
70
’
’
70
No GPS receiver is connected or has error on position
70
- 15 -
IC-M501
Continue holding DISTRESS button will cause radio to beep once a second.
After 4 second, the radio will beep long beeping sound for one second, then
the radio will transmit distress call
’
’
70
Transmitting Distress Call
After distress call transmission, the radio will wait for the acknowledgment at CH70
70
If the radio did not receive acknowledgment within 3.5 – 4.5 minutes, the radio will
repeat distress call transmission
If you want to cancel repeating distress call transmission, repress one of button on
the front panel
16
If the radio received acknowledgment from coast station, the radio sound alarm
signals, and will switch the channel to CH16 automatically
You may stop alarm sound by repressing one of button on the front panel
Or the radio will stop alarm sound after 2 minutes
16
- 16 -
IC-M501
2 Receiving
Receiving Distress Call
When you received Distress Call, the radio will display “Received DISTRESS call”
At same time, the radio sounds alarm signals. Then the radio will switch to CH16
The alarm sound can be cancelled by repressing one of button on the front panel
Or the radio will stop the alarm sound after 2 minutes
16
3 Receiving Distress ACK
If
you
received
distress
acknowledgment
display ”Received DISTRESS ACK”, and
for
other
ship,
the
will
will sound alarm signals as well as will switch
to CH16
The alarm sound signals can be cancelled by repressing one of button.
Or the radio will stop alarm sound signals after 2 minutes
16
4 Receiving Distress Relay ACK
Same as above except display showing ”Received DISTRESS RELAY ACK”
16
4 Receiving Distress
Distress Relay
Same as above except display showing ”Received DISTRESS RELAY”
16
- 17 -
radio
IC-M501
- 18 -
IC-M501
6 Transmitting Individual Call
When you repress DSC/ENT button, the radio will show DSC related menu
Then you select INDIVIDUAL from menu and repress DSC/ENT button, the radio will
switch the channel to CH70 automatically
When you scroll menu all way down to bottom and selected EXIT or repress other
then DSC/ENT button, the radio will exit DSC related menu selection, and will return
to normal operation
20
DSC menu and contents is as follows
Readout
DSC Operation
INDIVIDUAL
Transmitting Individual call
INDV ACK
Transmitting individual acknowledgement
ALL SHIP
Transmitting All ship call
RCV CALLS
Displaying received message
DTRS SET
Temporal Distress information input
SET-UP
Editing Individual ID
EXIT
Exit this menu
To selecting DSC category, rotate main dial to select desired category, and repress
DSC/ENT button to finish the selection
Foe USA model, the radio does not support this, unless category selection was turned
on by Cloning software
70
- 19 -
IC-M501
Next, select address ID selection, Dial up desired individual ID with main dial knob.
Then repress DSC/ENT button to finish the selection
If the radio does not have pre-stored individual ID, the radio will show Manual SET
instead of individual ID
70
70
When manual ID set mode is selected, you may select cursor position by
repressing SCAN button or CH/WX button, then you may select desired
character by main dial knob
After you finish editing CH name, repress DSC/ENT button to finish entering
individual ID
70
After selected individual ID, hold DSC/ENT button for 5 seconds to transmit
individual call
During holding DSC/ENT button, the radio beeps once a one second,
After 5seconds, the radio beeps for one second indicating transmitting individual
transmission
70
- 20 -
IC-M501
After transmitted Individual call, the radio will wait for acknowledgment
70
If the radio received acknowledgment or repressed button on the front panel, the
radio will back to the user channel
20
- 21 -
IC-M501
7 transmitting Individual acknowledgement
acknowledgement
When the radio received Individual Call, the radio will show display below
Also After selecting DSC menu by repressing DSC/ENT button, and selecting INDV
ACK by DSC/ENT button, the radio will switch to CH70
20
After selecting desired person, repress DSC/ENT button
70
70
Select desired comply option, repress DSC/ENT button
70
70
- 22 -
IC-M501
Select Reason with main dial knob, and repress DSC/ENT button
70
Contents of Reason selection
Readout for Reason
reason given
Congestion
Busy
Queue indication
Station barred
No operator
Equipment disable
Unable channel
Unable mode
After holding DSC/ENT button for 5seconds, the radio will transmit Individual ACK
After transmission is completed, the radio will back to user channel
70
- 23 -
IC-M501
Transmitting
ing All Ship Call
8 Transmitt
Repress DSC/ENT button to show the DSC selection menu
Then select ALL SHIP by main dial knob, and repress DSC/ENT button to finish the
selection
The radio will switch to CH70 automatically
20
To selecting DSC category, rotate main dial to select desired category, and repress
DSC/ENT button to finish the selection
Foe USA model, the radio does not support this, unless category selection was turned
on by Cloning software
70
Selecting items for category
After selected individual ID, hold DSC/ENT button for 5 seconds to transmit
individual call
During holding DSC/ENT button, the radio beeps once a one second,
After 5seconds, the radio beeps for one second indicating transmitting individual
transmission
70
- 24 -
IC-M501
After transmission of ALL SHIP CALL, the radio will switch back to user channel
20
9 Displaying received message (Distress)
Repress DSC/ENT button to show the DSC selection menu
Then select RCV CALLS by main dial knob, and repress DSC/ENT button to finish the
selection
20
Select message type with main dial knob, and repress DSC/ENT button to finish the
selection
(Stored messages are up to 20 message for both Distress and Other)
20
20
- 25 -
IC-M501
Select desired distress message with main dial knob, and repress DSC/ENT button to
finish the selection
20
20
Repressed DSC/ENT button to display nature of distress message in details
°
’
°
’
20
20
20
20
IF you want to erase data, repress H/L button
- 26 -
IC-M501
Nature of DISTRESS display
Explosion
Disable Adrift
Flooding
Abandoning Ship
Collision
Piracy Attack
Grounding
Man Overboard
Capsizing
Sinking
10 Displaying received message (Other)
Select message type for other with main dial knob, and repress DSC/ENT button to
finish the selection
20
Select desired message with main dial knob, and repress DSC/ENT button to finish
the selection
20
20
- 27 -
IC-M501
Message type display
Displaying
Readout
Details
ALL
All ships
GEOGRAPHIC
Geographical area
DTRS RELAY
Distress relay
DTRS ACK
Distress acknowledgement
DTRS RL AC
Distress
INDV ACK
Individual acknowledgement
INDV CALL
Individual call
acknowledgement
ships call message
Repress DSC/ENT button to review detail message
20
20
20
20
20
- 28 -
relay
IC-M501
Displaying Individual Call message
Repress DSC/ENT button for reviewing detail message
20
20
20
20
20
- 29 -
IC-M501
Displaying Individual acknowledgement message
20
20
20
20
Displaying Comply
Readout
Details
Unable comply
Able comply
Displaying Reason
Readout
reason given
Congestion
Busy
Queue indication
Station barred
No operator
Equipment disable
Unable channel
Unable mode
- 30 -
IC-M501
Displaying Distress acknowledgement message
°
’
°
’
20
20
20
20
20
20
- 31 -
IC-M501
Displaying Distress relay acknowledgement message
°
’
°
’
20
20
20
20
20
20
- 32 -
IC-M501
Displaying Distress relay message
°
’
°
’
20
20
20
20
20
20
20
- 33 -
IC-M501
11 Distress information input
Repress DSC/ENT button to show the DSC selection menu
Then select DTRS SET by main dial knob, and repress DSC/ENT button to finish the
selection
20
Select desired menu with main dial knob, and repress DSC/ENT button to finish
the selection
20
20
20
20
- 34 -
IC-M501
Setting
of Distress
Select desired message by main dial knob, and repress DSC/ENT button to finish the
selection
20
Setting Position
You may select cursor position by repressing SCAN button or CH/WX button,
then you may select desired number N, W, .S or E by main dial knob
After you finish editing position, repress DSC/ENT button to finish
°
’
°
’
20
Setting Time
You may select cursor position by repressing SCAN button or CH/WX button,
then you may select desired number N, W, .S or E by main dial knob
After you finish editing position, repress DSC/ENT button to finish
20
- 35 -
IC-M501
12 Editing Individual ID
Repress DSC/ENT button to show the DSC selection menu
Then select SET-UP by main dial knob, and repress DSC/ENT button to finish the
selection
20
Select desired menu by main dial knob, and repress DSC/ENT to finish
20
20
ADD ID (Adding Individual ID)
This menu is adding individual ID, and to editing this individual Id is as follows
You may select cursor position by repressing SCAN button or CH/WX button,
then you may select desired character by main dial knob
After you finish editing Individual ID editing , repress DSC/ENT button
to finish
(9 number)
10 characters
--
20
- 36 -
IC-M501
DELETE ID (Deleting Individual ID)
Select desired ID by main dial knob, and repress DSC/ENT to finish the selection
When you have only one memory, the radio does not show MORE
Also if you do not have any stored ID, the radio will sound error beep, and will not
show the following screen
20
To erase ID, repress H/L button
If you repress DSC/ENT button, the contents will not be erased
20
13
ATIS Reducer
When radio received ATIS signals, the radio will mite audio
Readout for receiving ATIS signals
When the radio received ATIS signals, the radio will display ID for 10
seconds
20
- 37 -
IC-M501
14 Operation with DSC terminal connected
When DSC terminal is connected the radio, DSC terminal will commands
channel selection for DSC operation
Transmitting Distress Call
1.
When operator repressed DISTRESS button on DS-100, the Radio will beep once, and
will switch the channel to CH70
Continue holding DISTRESS button will beep once a second for 5 seconds. Then DSC
terminal will send distress signals to radio for distress transmission
At that time the radio emits beep sound with full volume
2. After transmission of distress call, the radio will switch to CH16 for
voice communication
3. If the DSC terminal does not receive acknowledgment within 3.5 – 4.5 minutes, the
radio will switch the channel to CH 70 at 5 seconds before repeating distress call
transmission.
After transmission of repeating distress call, the radio will switch back to CH16
70
Transmitting All ship call
1. When transmitting ALL SHIP CALL, the DSC terminal (DS-100) commands radio
to switch the channel to CH70. Then supplying All Ship Call signals to radio
for transmission
2. After transmission of All Ship Call, the radio will switch the channel
to CH16 for voice communication (Gateway channel can be set by DS-100 if you
desired)
70
- 38 -
IC-M501
Receiving Distress call
1. When the radio received Distress Call signals, the radio will switch the
channels to CH16, and sound alarm with full volume
2. Repressing cancel button on DS-100 will stop alarm sound
16
Receiving Routine and Safety Individual call
1.When the radio received Routine or Safety individual call, the radio will
switch the channel to CH16 for voice communication
(Gateway channel can be set by DS-100 if you desired)
Receiving Urgency Individual call
1.When the radio received Urgency individual call, the radio will switch the
channel to CH16 for voice communication, and same time the radio will sound
alarm signals
(Gateway channel can be set by DS-100 if you desired)
Repressing cancel button on DS-100 will stop alarm sound
Receiving Routine and Safety All ships call
1.When the radio received Routine or Safety All Ship call, the radio will
switch the channel to CH16 for voice communication
(Gateway channel can be set by DS-100 if you desired)
Receiving Distress and Urgency All ships call
1.When the radio received Distress and Urgency All Ship call, the radio will
switch the channel to CH16 for voice communication, and same time the radio
will sound alarm signals
(Gateway channel can be set by DS-100 if you desired)
- 39 -
IC-M501
Repressing cancel button on DS-100 will stop alarm sound
User setup mode
Item
Readout
Readout
Details
Beep
(*)
Setting Beep ON / OFF
Scan
(*)
Normal Scan
Priority Scan
WX Alart
WX Alart ON / OFF
(*)
Scan Timer
Resume after 5sec from pausing
(*)
scan
Resume after 3sec from signal
drop
Dual watch
(*)
Dual Watch
TRI Watch
Time Offset ±
Setting Local time from UTC
(Default
=0)
Scrambler
Scrambler ON / OFF
(*)
Scrambler
Setting scrambler code
code
(Default
=0)
Internal SP
(*)
Internal Speaker ON / OFF
- 40 -
IC-M501
(*) Default
on
n-
27
- 41 -
IC-M501
V Other mode
Band Extension Mode
This mode opens all channels including private channel and free channels
This mode can be activate by cloning software or internal switch
Setting USA version
If USA Initial is on by cloning software, Holding CH/WX button and turning radio
will initialize factory default for USA version
DSC alignment mode
- To enter the DSC alignment mode, turning radio while holding HI/LOW button
- CH16 button will select items
- UP or DOWN button will select desired channel
- Repressing PTT will transmit with selected items
- Cycle the radio power to return the normal operation,
Items
DSC 1300Hz
DSC 2100Hz
DSC
50%
duty
DSC code
ATIS 1300Hz
ATIS 2100Hz
ATIS
50%
duty
Un mod
Readout
Contents
1300Hz single tone (Dev.2.6kHz)
2100Hz single tone (Dev.4.2kHz)
1300Hz/2100Hz
alternating
tone
(Dev.2.6/4.2kHz)
Distress call output (Dev.2.6/4.2kHz)
1300Hz continuous single tone (Dev.1.3kHz)
2100Hz continuous single tone (Dev.2.1kHz)
1300Hz/2100Hz
alternating
tone
(Dev.1.3/2.1kHz)
No modulation
- 42 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Keywords                        : ??
Modify Date                     : 2000:05:04 14:38:54-07:00
Author                          : ??
Create Date                     : 2000:05:04 14:38:38
Title                           : IC-M501??
Creator                         : Microsoft Word 9.0
Page Count                      : 42
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools