ICON DIGITAL 2502007002 GUITAR WIRELESS SYSTEM-TRANSMITTER User Manual Beetles

Download:
Mirror Download [FCC.gov]
Document ID	896284
Application ID	2aO6ocdpvzKh28iLlBzMZg==
Document Description	USERS MANUAL 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	246.04kB (3075546 bits)
Date Submitted	2008-01-30 00:00:00
Date Available	2008-01-30 00:00:00
Creation Date	2007-08-27 16:01:55
Producing Software	pdfFactory Pro 2.10 (Windows XP Chinese)
Document Lastmod	2008-01-25 17:49:08
Document Title	Beetles.cdr
Document Creator	pdfFactory Pro www.fineprint.com.cn
Document Author:	yan

Quick Setting up and Using Your Beetles System
Setting up your Beetles Wireless system is easy and it won't take you more than few minutes to finish.
Follow the below steps:1. Unpack your Beetles Wireless System. You may save all the packing materials for packing purpose in the future.
2. Check if your Beetles Receiver are having the same RF Channels (U1-U10, please see P.9 for ICON Frequency Chart)
labels as your Beetles Transmitter. They needed to be same for your Beetles wireless system working.
3. Insert a standard 9V alkaline battery into the Receiver's Battery Compartment or plug in the
provided power adapter into the DC 9V jack.
4. Place the Receiver on the floor and lift up its dual antennas to the vertical position.
5. Make sure the powers are off for your Beetles Receiver and Transmitter.
6. Plug the cable jack to the output connector of your Receiver and connect it to your Amplifier
or Mixer (make sure the power is off for your Amplifier or Mixer).
7. Turn the Receiver's Volume Control knob to the most anti-clockwise position (i.e. Min. Level)
and push the Power knob to turn it on. The "ON" LED should light red.
8. Insert a standard 1.5V battery into your Beetles Transmitter Battery compartment. Then, turn
the power on. The "ON" LED should light once.
9. Check the "RF" LED on your Receiver, it lights (green) indicating the Receiver receives good
therefore signal from your Transmitter.
User's Manual
Quick Setting up and Using Your Beetles System
Notice
Please follow the below procedure to change the angle of the jack of your transmitter.
Press the knob down by your finger as shown on Diagram 1
Then rotate the jack, while you pressing the knob down,
to your desire angle.
You should feel the "Click" Position when the jack turned
to 90o or 120o.
User's Manual
Quick Setting up and Using Your Beetles System
10. Now, it's time to set your audio levels. Turn on your amplifier or mixer and keep its level to minimum.
11. Turn the output level of your electric/acoustic guitar or bass to the maximum and start playing at a normal performance
level and keep observing the Beetles Receiver "RF" and "PEAK" LED. If PEAK LED stay on even Receiver's volume
control is set to its minimum, switch on your Beetles Transmitter's "15dB Pad " switch. Otherwise, turn the volume control
anti-clockwise until "PEAK" LED occasionally blinks red during the very loudest passages, then back it off just slightly;
this will ensure maximum signal to noise ratio.
12. Finally, raise the level of your amp or mixer until the desired volume is reached.
13. If you hear distortion or Beetles Receiver "PEAK " LED lights red even with the "15dB Pad" engaged and receiver level
control is set to minimum, please reduce the output level of your instrument until the "PEAK" LED no longer stay on all
the time. Conversely, if you hear weak and noise signal at the desired volume level, make sure your instrument is set to
maximum output level; the " 15dB Pad " is not engaged and the Receiver volume control is turned up.
User's Manual
902.125MHz
903.500MHz
905.375MHz
907.875MHz
908.500MHz
910.375MHz
912.750MHz
915.500MHz
916.250MHz
918.375MHz
920.125MHz
921.500MHz
922.375MHz
923.500MHz
925.800MHz
926.500MHz
U1
U2
U3
U4
U5
U6
U7
U8
U9
U10
U11
U12
U13
U14
U15
U16
Services
If your Beetles Wireless System needs the servicing, follow these instructions.
1. Ensure the problem is not related to operation error or external system devices.
2. Keep this owner's manual. Don't send the owner's manual to the service centre.
3. Pack the unit in its original packaging including end card and box. This is very important. If you have lost the packaging,
please make sure you have packed the unit properly. ICON is not responsible for any damage that occurs due to nonfactory packing.
4. Ship to the ICON technical support centre or the local return authorization.
U.S. OFFICE:
ICON Digital Corp.
2222 Pleasant View Road Suite #1
Middleton, WI 53562 USA
infous@icon-global.com
ASIA OFFICE:
ICON (Asia)
Suite Nos. 807-810, 8/F., Sunley Centre,
No. 9 Wing Yin Street, Kwai Chung,
NT., Hong Kong.
Infoasia@icon-global.com
For additional update information please visit our website at:
www.icon-global.com
User's Manual
11
www.icon-global.com
info@icon-global.com
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:ac26e6c9-80dd-4fba-83d5-274b62124aa6
Producer                        : pdfFactory Pro 2.10 (Windows XP Chinese)
Create Date                     : 2007:08:27 16:01:55Z
Creator Tool                    : pdfFactory Pro www.fineprint.com.cn
Modify Date                     : 2008:01:25 17:49:08+08:00
Metadata Date                   : 2008:01:25 17:49:08+08:00
Document ID                     : uuid:c54a13a7-4da8-4843-896b-9f394a4e1c51
Instance ID                     : uuid:f5171b1b-cb56-40fa-8039-2170b6f75022
Format                          : application/pdf
Creator                         : yan
Title                           : Beetles.cdr
Author                          : yan

EXIF Metadata provided by EXIF.tools