ICON DIGITAL 2502007002 GUITAR WIRELESS SYSTEM-TRANSMITTER User Manual Beetles

ICON INTERNATIONAL DIGITAL LIMITED GUITAR WIRELESS SYSTEM-TRANSMITTER Beetles

Contents

USERS MANUAL 1

Download: ICON DIGITAL 2502007002 GUITAR WIRELESS SYSTEM-TRANSMITTER User Manual Beetles
Mirror Download [FCC.gov]ICON DIGITAL 2502007002 GUITAR WIRELESS SYSTEM-TRANSMITTER User Manual Beetles
Document ID896283
Application ID2aO6ocdpvzKh28iLlBzMZg==
Document DescriptionUSERS MANUAL 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize38.55kB (481825 bits)
Date Submitted2008-01-30 00:00:00
Date Available2008-01-30 00:00:00
Creation Date2007-08-27 16:01:55
Producing SoftwarepdfFactory Pro 2.10 (Windows XP Chinese)
Document Lastmod2008-01-25 17:49:34
Document TitleBeetles.cdr
Document CreatorpdfFactory Pro www.fineprint.com.cn
Document Author: yan

BEETLES series
UHF Guitar Wireless system
BASS WIRELESS SYSTEM
ELECTRIC GUITAR WIRELESS SYSTEM
ACOUSTIC GUITAR WIRELESS SYSTEM
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
Please read all instructions before operating the uni t.
Keep these instructions for future reference.
Please read all safety warnings.
Follow manufacturer's instructions.
Do not use t his unit near water or m oisture.
Clean only w ith a dry cloth.
Install in accordance with the manufacturer's instructions.
Do not i nstall or use near any heat sources such as radiators, heat regist ers, stoves, or ot her apparatus
( including amplifiers ) that produce heat.
9. Do not bypass or alter the polarized grounded plug. Serious damage may r esul t and will void your warranty.
A polarized plug has two blades w ith one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or t hird prong is provided for your safety. If the provided plug does not fit int o your outlet,
consult an electrician.
10. Protect the power cord from being walked on or pinched Check the entire wire periodically as well as all plugs,
receptacles and the point where the cord connects t o the unit.
11. Unplug this unit during lightning st orms or when unused for long periods of time.
12. Refer all servicing to qual ified personnel. S ervicing is required when the unit has been damaged in any way.
User's Manual
Introduction
Welcome Note
A personal welcome to you from the management and employees of ICON.
All of us here at ICON are dedicated to provide excellent products with inherently good value, and we are delighted you
have purchased one of our products.
We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction,
we will endeavor to make things right.
Welcome to ICON, and thank you for becoming part of our worldwide extended family!
Guide
In these pages, you will find a detailed features description of the Beetles series Wireless system, as well as a guided tour
through its control panel, step-by-step instructions for its setup, usage, and full specifications.
You will also find a warranty card enclosed. Please fill it out and mail it in so that you can receive online technical support
and update with ICON products information in the future.
With proper care, your Beetles Wireless System will operate trouble free for many years. We recommend you record your
serial number in the space provided below for future reference.
Please write your serial number here for future reference:
Purchased at:
Data of purchase:
User's Manual
Content
Package Contents
Product Features
Beetles Receiver
Beetles Transmitter
Quick Setting up and Using Your Beetles System
ICON Frequency Chart
Specifications
10
Services
11
User's Manual
Package Contents:
Make sure the below items are provided in the package:
Beetles Wireless Receiver Unit
Beetles Wireless Transmitter Unit
Power Adapter for Receiver
"Angle Adapter" for Transmitter Plug
9V Alkaline Battery
1.5V Alkaline Battery
Instructions manual
User's Manual
Product Features
Beetles Transmitter
RF
ON
Beetles Receiver
User's Manual
PLL synthesized technology
True diversity technology permits minimum dropouts in the RF link
Equipped with S.A.W. filter for interference-resistant
Built-in noise mute and squelch permit interference-free
Unique ICON EQ design circuit for differences instruments
BeetleElectric for Electric Guitar
BeetleBass for Bass
BeetleAcoustic for Acoustic Guitar
Tuned antennas for the most stable RF reception
Available in 10 differences Channels with wide interval to ensure free
RF interference from each other when using in the same location.
Unique Design and compact for portable
Beetles Receiver
1. Power Switch:
Push to turn on the receiver power. (Note: Output Jack (9) must be inserted for the
receiver to power up)
RF
ON
2. Volume Switch:
Adjust the output level of the Receiver to your Guitar Amp etc.
3. RF LED:
This LED lights when receiving signal from Transmitter.
4. PEAK LED:
This LED lights when output signal from Transmitter is at the onset clipping
(i.e. Distortion occurred).
Fig1
5. BATT. LOW LED:
This LED lights when receiver battery is running low.
6. ON LED:
This LED lights when the receiver is switched on.
Photo
7. Battery Compartment Latch:
Push the latch in the direction as indicated arrow shown below and pull to open the
latch.
Insert standard 9V alkaline battery into the compartment (package provided). Please
insert the battery in the right direction as the + & - polarity markings shown, wrong
Insert direction will cause severe damage to your Beetles receiver and will void your
warranty. Also, you may power your receiver by the ICON power adapter provided.
User's Manual
Beetles Receiver
8. Antennas:
Pull to lift up the dual antennas. For optimum RF reception, pull both antennas to
their up most vertical position.
9. Output Jack:
Use this standard unbalanced high impedance (5-10K Ohm)1/4" jack to connect
the receiver to your amplifier or audio mixer. Wiring is as follows: tip hot, sleeve
ground.
Fig 2
11
10. Squelch Control:
This control determines the maximum range of the receiver before audio signal
dropout. Usually, you should leave this as the factory default setting. Also, you
may adjust it by a small screwdriver.
11. DC Input:
Connect the provided ICON's DC power adapter here.
10
Fig 3
User's Manual
Beetles Transmitter
1. Power Switch:
Switch the power of the Beetles Transmitter in the direction of the arrow shown.
2. 15 dB Pad:
Switch to reduce the output of the transmitter by 15dB when your instrument is
outputting too hot a signal.
3. Transmitter Plug:
Insert this standard 1/4" plug into your Guitar output connector.
Beetles Acoustic for Electric Acoustic Guitar
Beetles Electric for Electric Guitar
Beetles Bass for Electric Bass
Fig 4
You may adjust the angle of the plug for different type of guitar as followings:
90 degree: Designed for GibsonTM type or all other instruments that have end mount-jacks.
(Note: Please insert ICON's "Angle Adapter" to secure the plug position)
120 degree: Designed for Fender StratocasterTM type recessed jacks.
4. Battery Compartment:
Slide to open the latch. Insert a standard 1.5V alkaline battery ( package provided )
into the compartment. Please insert the battery in the right direction as the + & polarity markings shown, wrong insert direction will cause severe damage to your
Beetles Transmitter and will void your warranty.
5. Antenna:
Flexible antenna for optimum RF reception.
Fig 5
6. Power LED:
This LED will light once you turn your transmitter on. It will stay on when the battery
is running low.
User's Manual

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:92ebb130-227d-4839-bded-b809e563648a
Producer                        : pdfFactory Pro 2.10 (Windows XP Chinese)
Create Date                     : 2007:08:27 16:01:55Z
Creator Tool                    : pdfFactory Pro www.fineprint.com.cn
Modify Date                     : 2008:01:25 17:49:34+08:00
Metadata Date                   : 2008:01:25 17:49:34+08:00
Document ID                     : uuid:c54a13a7-4da8-4843-896b-9f394a4e1c51
Instance ID                     : uuid:f5171b1b-cb56-40fa-8039-2170b6f75022
Format                          : application/pdf
Creator                         : yan
Title                           : Beetles.cdr
Author                          : yan
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VY72502007002

Navigation menu