ICP Evaporator Coils Manual L0502508

User Manual: ICP ICP Evaporator Coils Manual ICP Evaporator Coils Owner's Manual, ICP Evaporator Coils installation guides

Open the PDF directly: View PDF .
Page Count: 1

Downflow Base Kit (Instructions) EBP, EBX, EBV, EBW

Unit Disconnect

WARNING: Before beginning any installation or modification, be sure the main electrical disconnect switch is in the

OFF position. Tag side connect switch with suitable warning label. Electrical shock can cause personal injury or

death.

INTRODUCTION

This instruction covers the installation of downflow base kits on models EBP, EBX, EBV and EBW fan coils. (See Table 1.) The

device is designed to provide a means of eliminating open passage through building structure (per UL and NFPA 90B), and

provides a 1-in. clearance between plenum and initial penetration of structure.

DESCRIPTION AND USAGE

The downfiow base kit is required in downflow installations of fan coils. The kit maintains 1-in. minimum clearance between

unit discharge plenum, ductwork, and combustible materials and also provides a gap-free seal with the floor. Before installing

the downflow base, convert the fan-coil unit for downflow installation by positioning unit with filter section at top and rotating

coil 180 degrees. See downflow bracket kit Installation Instructions for details.

INSTALLATION

1. Cut a hole in floor large enough for clearance of downflow base brackets. See Fig. 1 and Table 1 to determine clearance

dimensions.

2. Set downflow base on floor with brackets inserted into hole.

3. Fasten base firmly to floor with screws through base flanges.

4. Set unit on downflow base inserting unit discharge duct flange through hole in base.

5. Connect ductwork to unit discharge duct flange.

TABLE-1

EBP, EBW 1800, 2400

EBAC01NCB1 13-7/!6" 14-7/8"

EBAC02NCB1 EBP, EBW 3000, 3600 13-7/!6" 18-1/4"

EBX, EBV 2400

EBP 4200, 4800, 6000

EBAC03NCB1 EBX, EBV 3600, 4800 13-7/!6" 21-3/4"

EBW 4200, 4800, 6000

EBAC04NCB1 EBX 6000 13-7/!6" 25-1/4"

"FLANGE

DOWNFLOW

BASE BRACKET

FLOOR

OPENING

Fig. 1--Downflow Base

1 482 01 2223 00

September, 2002