ID TECH ID80125001ZYX Bluetooth Magnetic Stripe Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1682047
Application ID	1XLagTDQHfZ913ZA5AGoKA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.39kB (154825 bits)
Date Submitted	2012-04-23 00:00:00
Date Available	2012-04-23 00:00:00
Creation Date	2012-04-23 10:38:14
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2012-04-23 14:26:01
Document Title	USER MANUAL
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	user

USER MANUAL
BT Mag
Bluetooth Magnetic Stripe Reader
80125501-001-53
4/20/2012
BT Mag User Manual
Revision History
Rev
50
51
52
53
Date
3/19/2012
4/10/2012
4/19/2012
4/20/2012
Description of Changes
Initial release
Minor revision
Minor revision
Minor revision
By
JW
JW
JW
JW
Table of Contents
Introduction................................................................................................................. 3
Applicable Documents................................................................................................ 3
Features and Benefits.................................................................................................. 3
Specifications.............................................................................................................. 4
LED Operation............................................................................................................ 6
Outline Drawing ......................................................................................................... 8
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 2 of 9
BT Mag User Manual
1 Introduction
The BT Mag is a handheld MagStripe reader that works with mobile devices or PCs with
Bluetooth connectivity. It transfers card data via Bluetooth to POS applications in the
host devices.
2 Applicable Documents
80125401-001 Rev.A
ISO 7810
ISO 7811 - 1 through 6
ISO 4909
ISO 7812
ISO 7813
AAMVA Specifications
80101502-001 Rev.F
BT Mag Requirement Spec
Identification cards -- Physical characteristics
Identification Cards - Track 1 through 3
Magnetic stripe content for track 3
Identification Cards – Identification for issuers Part 1 & 2
Identification Cards – Financial Transaction Cards
Drivers License Standards - Most recent available
SPI Securehead manual
3 Features and Benefits
Connects to any mobile device with Bluetooth capability
Keychain holes for convenience
Reads up to 3 tracks of card data
Supports TDES and AES encryption using
DUKPT Key Management
Wireless range up to 30 feet
Battery life: 4 hours active, 8 hours standby
Micro-USB port for battery charging
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 3 of 9
BT Mag User Manual
4 Specifications
•
Interface
- Class 2 Bluetooth
- Can also be a standalone USB device for key injection when a Micro-B to
A USB cable is connected
- Bluetooth is disabled during key injection or DFU communication
•
Magnetic stripe reader
- Meets ISO 7811 specification
- Supports AAMVA formats
- Support single, dual or triple tracks card
- Bi-directional swipe
- TDES, & AES Encryption
- Media Densities: 75 bpi through 210 bpi on all tracks, F2F Encoding
Format
- Media Speed: 5 to 45 IPS
- Low Amplitude reading: >30 % @210 bpi, >40% @75 bpi
•
Batteries
- Rechargeable battery
- Battery life:
• Up to 8 hours in standby mode
• Up to 4 hours in active mode
• Active mode is defined as 10+ swipes per hour
- Charging through MicroUSB interface external charger
- The unit is functional if Bluetooth connection is on while charging
•
LED
•
One Dual-color Led to indicate Bluetooth/Charging status
• blue indicates Bluetooth connection status
• Red indicates Charging
Another Dual-color LED to indicate power/MSR read status
• Red indicates bad read
• Green on twice indicates good read
• Green blinking indicates power on/standby
Reliability
- Magnetic Head Life: 300,000 passes minimum
- Rail and Cover Life: 100,000 passes minimum
- MTBF: 300,000 POH
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 4 of 9
BT Mag User Manual
•
Electro-Static Discharges (ESD)
- 6kV contact, and 12kV air discharge
• Environmental
Temperature range
- Operating
0 to 55° C
(32 to 131° F) [non-condensing]
- Storage
-30 to 70° C (-22 to 158° F) [non-condensing]
- Relative humidity: maximum 95% (non-condensing)
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 5 of 9
BT Mag User Manual
5 LED Operation
Event
Power on
BI-COLOR
GREEN
Flash 3 times
ON (200ms)
OFF (200ms)
BI-COLOR
RED
OFF
BLUE
OFF
Description
RED
Only applied when user power
on the system or USB plug in.
Power off
Power
Standby/Sleep
Only applied when user
shutdown the system or system
detect low battery signal.
ON(30ms)
OFF
OFF(4970ms)
ON(30ms)
OFF(4970ms)
BTM
Standby/Sleep
1.The reader will enter this
mode when BT not in Pairing
or Connected status
2. Short press the tact SW will
force BT to search and build the
Link again
MSR Standby/Sleep
Pairing
ON(30ms)
OFF(4970ms)
OFF
ON(500ms)
OFF(500ms)
BTM Connected
ON(30ms)
ON
This mode indicates the MSR is
connected with application
software and waiting to accept
the card swiping
N/A
N/A
OFF(2970ms)
Charging
Charging
Complete
OFF
Low Battery
ON(30ms)
OFF(2970ms)
MSR - good read
Flash 2 times
OFF
ON(500ms)
ON(30ms)
OFF(500ms)
OFF(2970ms)
After the reader is power on,
that will into the pairing mode.
The LED is blinking when
Battery voltage is lower than
3.3V.
The reader will shutdown
automatically when the battery
voltage is lower than 3.2V
Green indicates good read
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 6 of 9
BT Mag User Manual
MSR - bad read
OFF
Flash 1 time
ON(500ms)
ON(30ms)
OFF(500ms)
OFF(2970ms)
Red indicates bad read
X: Not applicable
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 7 of 9
BT Mag User Manual
6 Outline Drawing
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 8 of 9
BT Mag User Manual
Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For P15B equipment
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
For portable devices
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device was tested for typical hand held operations with the device contacted
directly to the human body to the sides of the device. To maintain compliance with FCC RF exposure
compliance requirements, avoid direct contact to the transmitting antenna during transmitting.
Copyright © 2012, International Technologies & Systems Corp. All rights reserved.
Page 9 of 9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Company                         : 
Source Modified                 : D:20120423023616
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Modify Date                     : 2012:04:23 14:26:01+08:00
Create Date                     : 2012:04:23 10:38:14+08:00
Metadata Date                   : 2012:04:23 14:26:01+08:00
Document ID                     : uuid:e20a260b-3a56-403d-9678-49271a2184ce
Instance ID                     : uuid:d9f9645b-2098-415e-9521-85371b4d5776
Subject                         : 8
Format                          : application/pdf
Creator                         : user
Title                           : USER MANUAL
Page Count                      : 9
Page Layout                     : OneColumn
Author                          : user

EXIF Metadata provided by EXIF.tools