ID TECH IDCA66-0908 Card Reader User Manual Manual

ID TECH Card Reader Manual

Manual

IDTECHXpressReaderUserManual1USERMANUALXpressReaderVersionV1.00
IDTECHXpressReaderUserManual2WarningCaution:TheuseriscautionedthatchangesandmodificationsmadetotheequipmentwithouttheApprovalofmanufacturercouldvoidtheuser’sauthoritytooperatethisequipment.Notes:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuantto part15 of the FCC Rules. These limitsare designedto provide reasonableprotectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffand on. the user is encouraged to trytocorrect the interference by one or more of the followingmeasures:—Reorientorrelocatethereceivingantenna.—Increasetheseparationbetweentheequipmentandreceiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCCWarning:Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.LimitedWarrantyIDTECH warrantsthisproducttobeingoodworkingorderforaperiodofoneyearfromthedateofpurchase.Ifthisproductisnotingoodworkingorderaswarrantedabove,orshouldthisproductfail tobeingoodworkingorderatanytimeduringthewarrantyperiod,repairorreplacementshallbeprovidedby IDTECH.Thiswarrantydoesnotcoverincidentalorconsequentialdamagesincurredbyconsumermisuse,ormodificationofsaidproduct.Forlimitedwarrantyserviceduringthewarrantyperiod,pleasecontactIDTECH toobtainanRMAnumberandinstructionsforreturningtheproduct.©2008InternationalTechnologies&SystemsCorporation.Theinformationcontainedhereinisprovidedtotheuserasaconvenience.Whileeveryefforthasbeenmadetoensureaccuracy,IDTECHisnotresponsiblefor damagesthatmightoccurbecauseoferrorsoromissions,includinganylossofprofitorothercommercialdamage.Thespecificationsdescribedhereinwerecurrentatthetimeofpublication,butaresubjecttochangeatanytimewithoutpriornotice.IDTECH isaregisteredtrademarkofInternationalTechnologies&SystemsCorporation.Spectrumand ValuethroughInnovationaretrademarksofInternationalTechnologies&SystemsCorporation.IDTECH10721WalkerStreetCypress,CA906304720
IDTECHXpressReaderUserManual3(714)7616368www.idtechproducts.com
IDTECHXpressReaderUserManual4TableofContentsSection1.IntroductionDescriptionSection2.InstallationRS232interfaceSection3.DefinitionsCommonTermsandAbbreviationsRelatedDocumentsRelatedLinksSection4.ConfigurationParametersCommandprotocolCommand Set
IDTECHXpressReaderUserManual5Section1INTRODUCTIONDescriptionXpressreaderhasachoiceofcommunicationinterfacestoahost.Communicationsarethroughaninterfacecable.Thecablecanexitfromtheendorfromthebottomofthebase.Aslotorchannelinthebaseprovidesforinfieldorientationofthecableexitdirectionandprovidesastrainrelieffunction.Compatibility:ThereaderoperateswithmajorPOSandECRterminalsoldornew,providingtheterminalshaveacompatibleinterfacewiththereaderandathirdpartyprovidesasoftwareapplicationandcommunicationprotocollayertoaccomplishtherequiredoperations.XpressreaderaddressesseveralretailapplicationsforISO14443compliantidentificationtechnology.Thereadersupportsmajorfinancialcontactlessprograms,suchasPaypassMagstripe,VisaMSD.Thereaderreadsdatafromavarietyofcontactlesssources,includingcreditcards,keyfobs,andmustsupporttheRFrequirementsforISO/IEC14443A,ISO/IEC14443Basoutlined.Inparticular,thereadershallmeettheMasterCard,PayPassISO/IEC14443ImplementationSpecification.Inaddition,thereadershallbecompatiblewithPOSapplications.Thereaderhastheoperability&functionalitydefinedinthePayPassImplementationSpecification.ThereadershallbecertifiedbyaPayPassqualifiedtestlab;thereadermustmeetthecriteriato"FunctionProperly"andpassthetestprocess.Inaddition,thereadersupportsreadingandwritingtoMifarecards.MifarecardssupportedareStandard,Classic,&UltraLite.Thissupportisintendedforaccesscontrolapplications,includingtransportation.Environmentally,thereaderisdesignedtofunctionattemperaturesrangingfrom0ºto50ºCinhumidityupto95%noncondensing.Itcanbestoredorshippedatmoreextremetemperaturesrangingfrom40ºto70ºC.
IDTECHXpressReaderUserManual6Section2INSTALLATIONThecoilhas4circlepowercable，thecoilpartnumber: HFB160093300
IDTECHXpressReaderUserManual7TheRs232coilhasonecircleofRs232cable,thecoilpartnumber:HFB160093300RS232InterfaceAswithastandardserialinterface,thehostmustbeconfiguredtoacceptthedataandperformtheappropriateprocessing.FortheRS232interfacedevice,theenduserneedscarethatthehostapplication'sRS232parameters(baudrate,databits,Start/Stopcharacters,parity,)matchthoseexpectedbythereader.DefaultRS232parametersare“38400,8,1,None”.Togetmoreinformation,pleaseseeRS232configurecommandpart.Section3DEFINITIONSThefollowingaredefinitionsofcommontermsandabbreviationsusedthroughoutthismanual.CFT ConsumerfacingTerminalISO InternationalOrganizationforStandardizationPCD PayPassCouplingDevicePICC PayPassIntegratedCircuitCardUSB UniversalSerialBusHOST APersonalComputerorSimilarComputingDevice
IDTECHXpressReaderUserManual8PayPassTerminalQualityManagement–Process[PPA/GEN/T01].PayPassTerminalQualityManagement–Requirements[PPA/GEN/T02]ISO/IEC14443Identificationcards,PhysicalCharacteristicISO/IEC14443–Identificationcards,Contactlessintegratedcircuit(s)cards/ProximitycardsPayPass–ISO/IEC14443ImplementationSpecificationMifare–Philips’ContactlessMifare®SmartCardICs&operationsSection4CONFIGURATIONPARAMETERSI.CommandprotocolHosttodevice:STXLenLLenHCommandDataLrc1Lrc2ETXSTX:0x02.1byte.LenL+LenH:sizeof(CommandData).2bytes.CommandData:maincommandstring.Severalbytesneeded.Lrc1:ExclusiveorofCommandData.1byte.Lrc2:SumofCommandData.1byte.ETX:  0x03.  1byte.E.g.Turnapplicationoffcommandis:0x020x020x000x780x160x000x6E0x8E0x03.Devicetohost:STXLenLLenHResponseDataLrc1Lrc2ETXSTX:0x02.1byte.LenL+LenH:sizeof(ResponseData).2bytes.ResponseData:mainresponsestring.Severalbytesneeded.Lrc1:ExclusiveorofResponseData.1byte.Lrc2:SumofResponseData.1byte.ETX:  0x03.  1byte.II.Hosttodevicecommandset1.Testusecommands.
IDTECHXpressReaderUserManual9Tousethesecommands,theapplicationmustbeoff(UsecommandAPPLICATION_CONTROLin35).11. CARRIERCOMMAND: <0xFD><0x01><ON/OFF>.Makethedevicetoemit.PARAMETERS:<0xFD><0x01>isthecommandhead.<ON/OFF>ON(0x01)meansturnoncarrier,OFF(0x00)meansturnoffcarrier.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.12. POLLINGCOMMAND:<0xFD><0x02><PollingCount>.Makethedevicetopollforonecard.PARAMETERS:<0xFD><0x02>isthecommandhead.<PollingCount>isthepollingtimes.1byte.0x00meansforever.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.13. RESETCOMMAND:<0xFD><0x03><0x00>Makethedevicetoresetthecarrier.PARAMETERS:<0xFD><0x03><0x00>isthecommandhead.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.14. REQACOMMAND:<0xFD><0x14><0x01>.InformthedevicetosendcommandrequesttotypeAcard.PARAMETERS:<0xFD><0x14><0x01>isthecommandhead.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.15. WUPACOMMAND:<0xFD><0x14><0x00>.InformthedevicetosendcommandwakeuptotypeAcard.
IDTECHXpressReaderUserManual10PARAMETERS:<0xFD><0x14><0x00>isthecommandhead.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.16. HALTACOMMAND:<0xFD><0x16><0x00>.InformthedevicetosendcommandhalttypeAcard.PARAMETERS:<0xFD><0x16><0x00>isthecommandhead.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.17. ACTIVEACOMMAND:<0xFD><0x18><0x00>.InformthedevicetosendcommandsactivetypeAcard.PARAMETERS:<0xFD><0x18><0x00>isthecommandhead.3bytes.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.18. REQBCOMMAND:<0xFD><0x25><0x01>.InformthedevicetosendcommandrequesttotypeBcard.PARAMETERS:<0xFD><0x25><0x01>isthecommandhead.3bytes.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.19. WUPBCOMMAND:<0xFD><0x25><0x00>InformthedevicetosendcommandwakeuptotypeBcard.PARAMETERS:<0xFD><0x25><0x00>isthecommandhead.3bytes.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.110. HALTBCOMMAND:<0xFD><0x27><0x00>
IDTECHXpressReaderUserManual11InformthedevicetosendcommandhalttypeBcard.PARAMETERS:<0xFD><0x27><0x00>isthecommandhead.3bytes.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways..111. ACTIVEBCOMMAND:<0xFD><0x29><0x00>InformthedevicetosendcommandsactivetypeBcard.PARAMETERS:<0xFD><0x29><0x00>isthecommandhead.3bytes.RETURN:Success:<ACK><Allcommandsandtheirresponses>.Fail:Thisoperationwillsucceedalways.112. APPCOMMANDCOMMAND:<0xFD><0x32><CPDU>Informthedevicetosendcommandstotheactivecard.PARAMETERS:<0xFD><0x32>isthecommandhead.2bytes.<CPDU>isthecommandsendtothecard.RETURN:Success:<ACK><R_APDU>Fail:Thisoperationwillsucceedalways.113. APP_TEST_STARTCOMMAND:<0xFD><0x41>Informthedevicetostartdigitaltest.PARAMETERS:<0xFD><0x41>isthecommandhead.2bytes.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.114. APP_TEST_STOPCOMMAND:<0xFD><0x42>Informthedevicetostopdigitaltest.PARAMETERS:<0xFD><0x42>isthecommandhead.2bytes.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.
IDTECHXpressReaderUserManual12Note:Commandsandtheirresponsesformat:ClencommandRlenresponseClencommandRlenResponse...2.SerialportcontrolcommandsetThedefaultparametersare:38400baudrate,8databits,1stopbit,noparity,nohandshaking.21.SET_BAUDRATECOMMAND:<0x70><0x01><NewBaudrate>.Setthedevice'sbaudrate.PARAMETERS:<0x70><0x01>isthecommandhead.2bytes.<NewBaudrate>istherequiredserialportcommunicationbaudrate.1byte:0x01for1200,0x02for2400,0x03for4800,0x04for9600,0x05for14400,0x06for19200,0x07for38400,0x08for57600,0x09for115200.RETURN:Success:<ACK><OldBaudrate(1byte)>.OldBaudrateistheoldbaudrate.Fail:<NAK><Errorcode>.22 SET_STOPBITSCOMMAND:<0x70><0x02><NewStopBits>.Thiscommandisusedtosetthedevice'sstopbits.Thetotallengthis3bytesPARAMETERS:<0x70><0x02>isthecommandhead.<NewStopBits>istherequiredserialportcommunicationstopbits.1byte:0x01for1stopbit,0x02for2stopbits,0x03for1.5stopbits.RETURN:Success:<ACK><OldStopBits(1byte)>.OldStopBitsistheoldstopbits.Fail:<NAK><Errorcode>.23. SET_PARITYCOMMAND:<0x70><0x03><NewParity>.Setthedevice'sparitystyle.PARAMETERS:<0x70><0x03>isthecommandhead.<NewParity>istherequiredserialportcommunicationparity.1byte:0x00fornoparity,0x01foroddparity,0x02forevenparity,0x03formarkparity,0x04forspaceparity.RETURN:Success:<ACK><OldParity.(1byte)>.OldParityistheoldparity.Fail:<NAK><Errorcode>.
IDTECHXpressReaderUserManual133.Systemcommandset31. GET_VERSIONCOMMAND:<0x78><0x01>.Getthesystem'sversion.PARAMETERS:<0x78><0x01>isthecommand.RETURN:Success:<ACK><versionstring(42bytes)>.Fail:Thisoperationwillsucceedalways.32. BEEPCOMMAND:<0x78><0x04><Duration>Makethesystem'sbeepertobeepforadesignatedtime.PARAMETERS:<0x78><0x04>isthecommandheader.<Duration>isthebeeper'sbeeplasttimein0.1second.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.33. LED_CONTROLCOMMAND:<0x78><0x05><LED><ON/OFF>.Controlthesystem'sled.PARAMETERS:<0x78><0x05>isthecommandheader.<LED>istheled'sid.0x000x07isacceptable.<ON/OFF>:0x01(ON)meansletledtolightonand0x00(OFF)meansletledtolightoff.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.34. APPLICATION_CONTROLCOMMAND:<0x78><0x16><APPON/OFF>.ControltheAPPLICATION'sonoroff.PARAMETERS:<0x78><0x16>isthecommandheader.<ON/OFF>:0x01(ON)meanslettheapplicationonand0x00(OFF)meanslettheapplicationoff.RETURN:Success:<ACK>.
IDTECHXpressReaderUserManual14Fail:Thisoperationwillsucceedalways.4.Applicationrelatedcommands41. APP_FLUSH_DATACOMMAND:<0x7E><0x01>.Flushtheunreadreaddata.PARAMETERS:<0x7E><0x01>isthecommandheader.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.42. APP_GET_DATACOMMAND:<0x7E><0x02><IsFlushData>Gettheunreadreaddata.Thiscommandwillresetthereaderintobufferedmode.PARAMETERS:<0x7E><0x02>isthecommandheader.<IsFlushData>:0x00isnot,othersyes.RETURN:Success:<ACK><data>.Fail:<NAK><ERROR_NO_DATA_AVAILABLE>43. APP_SET_AUTOSENDMODECOMMAND:<0x7E><0x04><MODE>.Setdatasendmode.PARAMETERS:<0x7E><0x04>isthecommandheader.<MODE>:0x00meansbufferedmodeand0x01meansautosendmode.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.44. APP_SET_DATETIMECOMMAND:<0x7E><0x08><DATE(YYYYMMDDHHMMSS)>.Setthedateandtimeinthesystem.PARAMETERS:<0x7E><0x08>isthecommandheader.DATE(YYYYMMDDHHMMSS)isthedateandtime.Eg.0x320x300x300x360x300x310x300x320x310x360x330x300x320x35means2006010216:30:25.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.
IDTECHXpressReaderUserManual1545. APP_GET_TVRCOMMAND:<0x7E><0x20>.Getthelastterminalverificationresult.PARAMETERS:<0x7E><0x20>.isthecommandheader.RETURN:Success:<ACK><TVR>Fail:<NAK><ERROR_NO_DATA_AVAILABLE>46. APP_GET_TSICOMMAND:<0x7E><0x22>.Getthelasttransactionstatusinformation.PARAMETERS:<0x7E><0x22>isthecommandhead.RETURN:Success:<ACK><TSL>Fail: <NAK><ERROR_NO_DATA_AVAILABLE>47. APP_GET_TVRTSICOMMAND:<0x7E><0x24>.Getthelastterminalverificationresultandtransactionstatusinformation.PARAMETERS:<0x7E><0x24>isthecommandhead.RETURN:Success:<ACK><TVR><TSL>Fail: <NAK><ERROR_NO_DATA_AVAILABLE>47. APP_GET_TRAN_RESULTCOMMAND:<0x7E><0x26>Getthelasttransactionresultinformation.PARAMETERS:<0x7E><0x26>isthecommandhead.RETURN:Success:<ACK><Result><Result>is1byte,seebelowdefinition.#TRANSACTION_TWOCARDS 0x7A#TRANSACTION_TERMINATE       0x7E#TRANSACTION_DECLINE 0x81#TRANSACTION_ACCEPT_OFFLINE  0x82#TRANSACTION_GO_ONLINE       0x84#TRANSACTION_COMPLETE        0x80Fail: <NAK><ERROR_NO_DATA_AVAILABLE>
IDTECHXpressReaderUserManual1648. APP_GET_CVMRESULTCOMMAND:<0x7E><0x28>.GetthelastterminalverificationCVMresult.PARAMETERS:<0x7E><0x28>isthecommandhead.RETURN:Success:<ACK><CVMResult>Fail: <NAK><ERROR_NO_DATA_AVAILABLE>49. APP_GET_DATETIMECOMMAND:<0x7E><0x18>Getdateandtime.PARAMETERS:<0x7E><0x18>isthecommandhead.RETURN:Success:<ACK><DATE(YYYYMMDDHHMMSS)>Eg.0x320x300x300x360x300x310x300x320x310x360x330x300x320x35means2006010216:30:25.Fail:Thisoperationwillsucceedalways.410. APP_GET_TRANSACTION_COUNTCOMMAND:<0x7E><0x30>Getthetransactioncount.PARAMETERS:<0x7E><0x30>isthecommandhead.RETURN:Success:<ACK><Transactioncount(4bytes)>Fail:Thisoperationwillsucceedalways.Dataformat:Applicationtype(1byte)track1track2.track1isencapsuledbystartsentinel'%'andendsentinel'?'.track2isencapsuledbystartsentinel';'andendsentinel'?'.AutosendmodedatawillnotbecapsuledbySTXandETX.Applicationtype:MASTER_APPLICATION  0x01VISA_APPLICATION    0x02EXPRESS_APPLICATION0x035.Datasettingcommands.Tousethesecommands,theapplicationmustbeoff.51. RETRIEVE_TERMINAL_DATA
IDTECHXpressReaderUserManual17COMMAND:<0x7E><0xF0><0x01><Tag>.Retrievetheterminal'sdataelement.PARAMETERS:<0x7E><0xF0><0x01>isthecommandhead.<Tag>isthedesireddataelement'stag.1or2bytesNote:Actioncode'stagiscodedas'0x01'.RETURN:Success:<ACK><Requesteddataelement(TLV)>Fail:Thisoperationwillsucceedalways.52. UPDATE_TERMINAL_DATACOMMAND:<0x7E><0xF0><0x02><Dataelement(TLV)>.Updatetheterminal'sdataelementtemporary.PARAMETERS:<0x7E><0xF0><0x02>isthecommandhead..<Dataelement(TLV)>:TLVformatdataRETURN:Success:<ACK><Statuscode(1byte)>.Fail:Thisoperationwillsucceedalways.53. UPDATE_TERMINAL_DATA_SAVECOMMAND:<0x7E><0xF0><0x03><Dataelement(TLV).>Updatetheterminal'sdataelement.PARAMETERS:<0x7E><0xF0><0x03>isthecommandhead.<Dataelement(TLV)>:TLVformatdataRETURN:Success:<ACK><Statuscode(1byte)>Fail:Thisoperationwillsucceedalways.54. SELECT_TERMINAL_APPLICATIONCOMMAND:<0x7E><0xF0><0x05><Applicationtype>.Selecttheterminal’sapplication,usedfortestonly.PARAMETERS:<0x7E><0xF0><0x05>isthecommandhead.Applicationtype:1byte.RETURN:Success:<ACK><Oldapplicationtype(1byte)>.Fail:Thisoperationwillsucceedalways.55. RETRIEVE_PUBLIC_KEYCOMMAND:<0x7E><0xF1><0x01><RID(5BYTES)><Index(1byte)>.Retrievetheterminal'sSAVEDpublickeyofaspecialRIDanditsindex.
IDTECHXpressReaderUserManual18PARAMETERS:<0x7E><0xF1><0x01>isthecommandhead.<RID(5BYTES)>istheapplications’sRID.<Index(1byte)>isthekeyindex.RETURN:Success:<ACK><RID(5)><Index(1)><HashIndicator(1)><AlgorithmIndicator(1)><Exponent(4)><KeyModuleLength(1)><KeyHash(20)><ModuleData(var)>.56. REVOKE_PUBLIC_KEYCOMMAND:<0x7E><0xF1><0x02><RID(5BYTES)><Index(1byte)>.Revoketheterminal'sSAVEDpublickeyofaspecialRIDanditsindex.PARAMETERS:<0x7E><0xF1><0x02>isthecommandhead.<RID(5BYTES)>istheapplications’sRID.<Index(1byte)>isthekeyindex.RETURN:Success:<ACK>Fail:Thisoperationwillsucceedalways.57. INVOKE_PUBLIC_KEYCOMMAND:<0x7E><0xF1><0x04><DATA>.InvokeapublickeyofaspecialRIDanditsindexintheterminal.PARAMETERS:<0x7E><0xF1><0x04>isthecommandhead.<DATA>:RID(5)Index(1)HashIndicator(1)AlgorithmIndicator(1)Exponent(4)KeyModuleLength(1)KeyHash(20)Pad(29)ModuleData(var).RETURN:Success:<ACK>Fail:Thisoperationwillsucceedalways.58. RETRIVE_PUBLIC_KEY_COUNTCOMMAND:<0x7E><0xF1><0x08><RID(5BYTES)>Retrievethecountoftheterminal'sSAVEDpublickeyofaspecialRID.PARAMETERS:<0x7E><0xF1><0x08>isthecommandhead.<RID(5BYTES)>RETURN:Success:<ACK><Count(1byte)>.Fail:Thisoperationwillsucceedalways.6.Devicedirectcontrolcommands.Commandheader:0xFE.Tousethesecommands,theapplicationmustbeoff(UsecommandAPPLICATION_CONTROLin35).
IDTECHXpressReaderUserManual1961. SEARCHCARDSCOMMAND:<0xFE><0x01><A/B><AFI>Detectcardsinthefield.PARAMETERS:<0xFE><0x01>isthecommandhead..<A/B>iscardtype:0fortypeAandtypeB,1fortypeAand2fortypeB.1byte.<AFI>isapplicationfamilyidentifierfortypeB.0fortypeA.1byte.RETURN:Success:<ACK><CardCount>[<CardType><UIDLen><UID>][<CardType><UIDLen><UID>]...<CardCount>isthe countoffoundcardsinthefield.[<CardType><UIDLen><UID>]willhappen<CardCount>times.<CardType>isthecard'stype:1fortypeAand2fortypeB.<UIDLen>isthefollowingUID'slength.<UID>isthefoundcard'sUID(fortypeAcard)orPUID(fortypeBcard).Fail:<ACK><0x00>.62. SELECTONECARDCOMMAND:<0xFE><0x02><CardType><LenOfUID/PUID><UID/PUPI>Selectonecard.PARAMETERS:<0xFE><0x02>isthecommandhead.<CardType>isthecard'stype:1fortypeAand2fortypeB.1byte.<LenOfUID/PUID>isthelengthoftheselectedUIDfortypeAorPUPIfortypeB.1byte.<UID/PUPI>:UIDfortypeA.PUPIfortypeB.RETURN:Success:<ACK><CardHandle><CardHandle>istheselectedcard'shandle,itwillbeusedbyothercommandstocommunicatewithaspecifiedcard.Fail:<ACK><0x00>63. DELETEONECARDCOMMAND:<0xFE><0x03><CardHandle>.Deleteonecardfromthesystem.PARAMETERS:<0xFE><0x03>isthecommandhead.<CardHandle>istheCard'shandlereturnedbySELECTONECARDcommand.RETURN:Success:<ACK><Freeslotsavailable>
IDTECHXpressReaderUserManual20Fail:Thisoperationwillsucceedalways.64. DELETEALLCARDSCOMMAND:<0xFE><0x04>Deleteallcardsfromthesystem.PARAMETERS:<0xFE><0x04>isthecommandhead.RETURN:Success:<ACK><Freeslotsavailable>.2bytesFail:Thisoperationwillsucceedalways.65.  GETUSINGCARDSCOUNTCOMMAND:<0xFE><0x05>Getthecardscountusingbythedevicesystem.PARAMETERS:<0xFE><0x05>isthecommandhead.RETURN:Success:<ACK><Usingcardscountbythedevice>.2bytesFail:Thisoperationwillsucceedalways.66.  GETFREESLOTSCOMMAND:<0xFE><0x06>.Getthefreeslotsavailableinthedevicesystem.PARAMETERS:<0xFE><0x06>isthecommandhead.RETURN:Success:<ACK><Freeslotsavailable>.2bytesFail:Thisoperationwillsucceedalways.67.  GETCARDCIDCOMMAND:<0xFE><0x07><CardHandle>.Retrieveonecard’scurrentCIDusedinthedevicesystem.PARAMETERS:<0xFE><0x07>isthecommandhead.<CardHandle>istheCard'shandlereturnedbySELECTONECARDcommand.RETURN:<ACK><Card'sCID>ifavailable.CIDisbetween1and14.Thisoperationwillreturn<NAK><ERROR_INVALID_CID_RETURNED>iffailed.68.  DISABLECARDCIDCOMMAND:<0xFE><0x08><CardHandle>Informthedevicedonotusecard’sCIDinthesystem.PARAMETERS:
IDTECHXpressReaderUserManual21<0xFE><0x08>isthecommandhead.<CardHandle>istheCard'shandlereturnedbySELECTONECARDcommand.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.69.  DISABLECARDNADCOMMAND:<0xFE><0x09><CardHandle>Informthedevicedonotusecard’sNADinthesystem.PARAMETERS:<0xFE><0x09>isthecommandhead.<CardHandle>istheCard'shandlereturnedbySELECTONECARDcommand.RETURN:Success:<ACK>.Fail:Thisoperationwillsucceedalways.610.  SENDCOMMANDTOCARDCOMMAND:<0xFE><0x0A><CardHandle><CommandBlock>Makethedeviceto communicatewiththecardinthesystem.PARAMETERS:<0xFE><0x0A>isthecommandhead.<CardHandle>istheCard'shandlereturnedbySELECTONECARDcommand.<CommandBlock>istheinputcommand.RETURN:Success:<ACK><Cardreturneddata>Fail:<NAK><Errorcode>
IDTECHXpressReaderUserManual22AppendixASTATUSCODETABLEReturnStatusandExplanationsErrorcode Description0xE1 ERROR_PARAMETER0xE2 ERROR_LOWOUTBUFFER0xE3 ERROR_CARD_NOT_FOUND0xE4 ERROR_COLLISION_CARD_EXIST0xE5 ERROR_TOOMANY_CARDS_EXIST0xE8 ERROR_NO_DATA_AVAILABLE0xE9 ERROR_INVALID_CID_RETURNED0xEA ERROR_INVALID_CARD_EXIST0xEC ERROR_COMMAND_UNSUPPORTED0xED ERROR_COMMAND_PROCESS0xEE ERROR_INVALID_COMMAND
IDTECHXpressReaderUserManual23AppendixCFUNCTIONIDTABLECARRIER<0xFD><0x01><ON/OFF>.POLLING<0xFD><0x02><PollingCount>.RESET <0xFD><0x03><0x00>REQA <0xFD><0x14><0x01>.WUPA <0xFD><0x14><0x00>.HALTA <0xFD><0x16><0x00>.ACTIVEA<0xFD><0x18><0x00>REQB<0xFD><0x25><0x01>.WUPB<0xFD><0x25><0x00>HALTB <0xFD><0x27><0x00>ACTIVEB<0xFD><0x29><0x00>APPCOMMAND<0xFD><0x32><CPDU>APP_TEST_START<0xFD><0x41>APP_TEST_STOP<0xFD><0x42>SET_BAUDRATE <0x70><0x01><NewBaudrate>.SET_STOPBITS <0x70><0x02><NewStopBits>.SET_PARITY <0x70><0x03><NewParity>.GET_VERSION <0x78><0x01>.BEEP <0x78><0x04><Duration>LED_CONTROL <0x78><0x05><LED><ON/OFF>APPLICATION_CONTROL <0x78><0x16><APPON/OFF>.
IDTECHXpressReaderUserManual24APP_FLUSH_DATA <0x7E><0x01>APP_GET_DATA <0x7E><0x02><IsFlushData>APP_SET_AUTOSENDMODE <0x7E><0x04><MODE>APP_SET_DATETIME <0x7E><0x08><DATE(YYYYMMDDHHMMSS)>.APP_GET_TVR <0x7E><0x20>.APP_GET_TSI <0x7E><0x22>.APP_GET_TVRTSI <0x7E><0x24>.APP_GET_TRAN_RESULT<0x7E><0x26>APP_GET_CVMRESULT <0x7E><0x28>APP_GET_DATETIME <0x7E><0x18>APP_GET_TRANSACTION_COUNT <0x7E><0x30>RETRIEVE_TERMINAL_DATA <0x7E><0xF0><0x01><Tag>.UPDATE_TERMINAL_DATA <0x7E><0xF0><0x02><Dataelement(TLV)>UPDATE_TERMINAL_DATA_SAVE <0x7E><0xF0><0x03><Dataelement(TLV).>SELECT_TERMINAL_APPLICATION <0x7E><0xF0><0x05><Applicationtype>.RETRIEVE_PUBLIC_KEY <0x7E><0xF1><0x01><RID(5BYTES)><Index(1byte)>.REVOKE_PUBLIC_KEY <0x7E><0xF1><0x02><RID(5BYTES)><Index(1byte)>.INVOKE_PUBLIC_KEY <0x7E><0xF1><0x04><DATA>.RETRIVE_PUBLIC_KEY_COUNT <0x7E><0xF1><0x08><RID(5BYTES)>SEARCHCARDS <0xFE><0x01><A/B><AFI>SELECTONECARD <0xFE><0x02><CardType><LenOfUID/PUID><UID/PUPI>DELETEONECARD <0xFE><0x03><CardHandle>DELETEALLCARDS <0xFE><0x04>GETUSINGCARDSCOUNT <0xFE><0x05>GETFREESLOTS<0xFE><0x06>.GETCARDCID <0xFE><0x07><CardHandle>.DISABLECARDCID<0xFE><0x08><CardHandle>DISABLECARDNAD <0xFE><0x09><CardHandle>SENDCOMMANDTOCARD<0xFE><0x0A><CardHandle><CommandBlock>
IDTECHXpressReaderUserManual25

Navigation menu