ID TECH IDTA98-0908 Card Reader User Manual Manual

ID TECH Card Reader Manual

Manual

SpectrumIIITribridUSER'SMANUALCEVersionX.XRev.AXXXXXXXXXXX5/05#XXX
WarningCaution:TheuseriscautionedthatchangesandmodificationsmadetotheequipmentwithouttheApprovalofmanufacturercouldvoidtheuser’sauthoritytooperatethisequipment.Notes:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuantto part15of the FCCRules. These limits are designedto provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffand on. the user is encouraged to tryto correct the interferenceby one or more of the followingmeasures:—Reorientorrelocatethereceivingantenna.—Increasetheseparationbetweentheequipmentandreceiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCCWarning:Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.LimitedWarrantyIDTECH warrantsthisproducttobeingoodworkingorderforaperiodofoneyearfromthedateofpurchase.Ifthisproductisnotingoodworkingorderaswarrantedabove,orshouldthisproductfail tobeingoodworkingorderatanytimeduringthewarrantyperiod,repairorreplacementshallbeprovidedby IDTECH.Thiswarrantydoesnotcoverincidentalorconsequentialdamagesincurredbyconsumermisuse,ormodificationofsaidproduct.Forlimitedwarrantyserviceduringthewarrantyperiod,pleasecontactIDTECH toobtainanRMAnumberandinstructionsforreturningtheproduct.©2005International Technologies&SystemsCorporation.Theinformationcontainedhereinisprovidedtotheuserasaconvenience.Whileeveryefforthasbeenmadetoensureaccuracy,IDTECHisnotresponsiblefor damagesthatmightoccurbecauseoferrorsoromissions,includinganylossofprofitorothercommercialdamage.Thespecificationsdescribedhereinwerecurrentatthetimeofpublication,butaresubjecttochangeatanytimewithoutpriornotice.IDTECH isaregisteredtrademarkofInternationalTechnologies&SystemsCorporation.SpectrumandValuethroughInnovationaretrademarksofInternationalTechnologies&SystemsCorporation.IDTECH10721WalkerStreetCypress,CA906304720 (714)7616368www.idtech.net
TableofContentsSection1.IntroductionDescriptionSection2.InstallationRS232interfaceSection3.DefinitionsCommonTermsandAbbreviationsRelatedDocumentsRelatedLinksSection4.ConfigurationParametersStructureGeneralCommandsRS232ReaderSpecialCommand
Section1INTRODUCTIONThecoilhas4circlepowercable，thecoilpartnumber: HFB160093300
TheRs232cablehasnocoil.DescriptionThereaderhasachoiceofcommunicationinterfacestoahost.Communicationsarethroughaninterfacecable.Thecablecanexitfromtheendorfromthebottomofthebase.Aslotorchannelinthebaseprovidesforinfieldorientationofthecableexitdirectionandprovidesastrainrelieffunction.Compatibility:ThereaderoperateswithmajorPOSandECRterminalsoldornew,providingtheterminalshaveacompatibleinterfacewiththereaderandathirdpartyprovidesasoftwareapplicationandcommunicationprotocollayertoaccomplishtherequiredoperations.ThereaderaddressesseveralretailapplicationsforISO14443compliantidentificationtechnology.Thereadersupportsmajorfinancialcontactlessprograms,suchasMasterCard'sPayPass,AmericanExpress'sExpressPayandVisa'sContactless,&DiscoverCard.Thereaderreadsdatafromavarietyofcontactlesssources,includingcreditcards,keyfobs,andNFCdevicesandmustsupporttheRFrequirementsforISO/IEC14443A,ISO/IEC14443BasoutlinedintherelevantpartsinISO18092.Inparticular,thereadershallmeettheMasterCard,PayPass ISO/IEC14443ImplementationSpecification.Inaddition,thereadershallbecompatiblewithNFCforPOSapplications.Thereaderhastheoperability&functionalitydefinedinthePayPassImplementationSpecification.ThereadershallbecertifiedbyaPayPassqualifiedtestlab;thereadermustmeetthecriteriato"FunctionProperly"andpassthetestprocess.
Inaddition,thereadersupportsreadingandwritingtoMifarecards.MifarecardssupportedareStandard,Classic,&UltraLite.Thissupportisintendedforaccesscontrolapplications,includingtransportation.
Section2INSTALLATIONRS232InterfaceAswithastandardserialinterface,thehostmustbeconfiguredtoacceptthedataandperformtheappropriateprocessing.FortheRS232interfacedevice,theenduserneedscarethatthehostapplication'sRS232parameters(baudrate,databits,Start/Stopcharacters,parity,andhandshakingmethod)matchthoseexpectedbythereader.Themagneticreader'soutputcanbeformattedwithterminatingcharactersandspecialpreambleand/orpostamblecharacterstringstomatchthedataformatexpectedbythehost.Section3DEFINITIONSThefollowingaredefinitionsofcommontermsandabbreviationsusedthroughoutthismanual.COMPANYCONFIDENTIALIDTECHINTERNALUSEONLYISO/IEC14443Identificationcards,PhysicalCharacteristicISO/IEC14443Identificationcards,Contactlessintegratedcircuit(s)cards/ProximitycardsPayPassISO/IEC14443ImplementationSpecificationMifarePhilips'ContactlessMifare®SmartCardIcs&operationsPayPassISO/IEC14443ImplementationSpecification,Version1.133106VisaqVSDC&MSDDocumentVersion1.0.1,May2006VisaCrossReferenceGuide:ISO14443versusPayPass,V1.0,January2005PayPassMagStripe,TechnicalSpecifications,Version3.2,October2006PayPassMagStripe,VendorTesting,Version2.0,November2005PayPassTerminalImplementationGuide,LatestRevisionAMEXCompatibilityRequirementsforPCDs,Version1.0AMEXApplicationLevelInterfaceSpec,Version1.7AMEXTerminalApplicationSpec,Version1.5
Section4CONFIGURATIONPARAMETERSProcessingacommandmaytakeawhile.Duringcommandprocessing,thereaderwillnotrespondtoanewcommand.Cautionmustbetakentomaintainatleast250msbetweentwocommandsifnoresponsehasbeenreceived.Oncecommunicationbetweenthehostandthereaderhasbeenestablished,changestothereader'ssettingscanbeenteredbysendingtheappropriatesetupcommandstothereaderfromthehostapplication.Followingareexplanationsandexamplesoftheproperformatandcommandcontenttosendcommandstothereader.Allcommandsandcharactersareexpressedinhexformatandcontainedinbrackets:CommandprotocolThiscommandprotocolisusedtocontrolthedevice.Commandprotocol:Hosttodevice:STXLenLLenHCommandDataLrc1Lrc2ETXSTX:0x02.1byte.LenH+LenL:sizeof(CommandData).2bytes.CommandData:maincommandstring.Severalbytesneeded.Lrc1:ExclusiveorofCommandData.1byte.Lrc2:SumofCommandData.1byte.ETX:  0x03.  1byte.Devicetohost:STXLenLLenHResponseDataLrc1Lrc2ETX
STX:0x02.1byte.LenH+LenL:sizeof(CommandData).2bytes.ResponseData:mainresponsestring.Severalbytesneeded.Lrc1:ExclusiveorofResponseData.1byte.Lrc2:SumofResponseData.1byte.ETX:  0x03.  1byte.RS232interfacecommandRS232 interface command is used to set or/and get the device’s RS232communicationparameters.The default parameters are: 38400bps, 8 data bits, 1 stop bit, no parity, nohandshaking.<SET_BAUDRATE>Commandstring:0x700x01NewBaudrate.Thiscommandisusedtosetthedevice'sbaudrate.Thetotallengthis3bytesParameters:0x700x01isthecommandhead.2bytes.NewBaudrateistherequiredserialportcommunicationbaudrate.0x01for1200,0x02for2400,0x03for4800,0x04for9600,0x05for14400,0x06for19200,0x07for38400,0x08for57600,0x09for115200.Returndata:OldBaudrate.OldBaudrateistheoldbaudrateifsucceed,0xEDiffailed.<SET_STOPBITS>Commandstring:0x700x02NewStopBits.Thiscommandisusedtosetthedevice'sstopbits.Thetotallengthis3bytesParameters:0x700x02isthecommandhead.NewStopBitsistherequiredserialportcommunicationstopbits.0x01for1stopbit,0x02for2stopbits0,0x03for1.5stopbits.Returndata:OldStopBits.OldStopBitsistheoldstopbitsifsucceed,0xEDiffailed.<SET_PARITY>Commandstring:0x700x03NewParity.Thiscommandisusedtosetthedevice'sparitystyle.
Thetotallengthis3bytesParameters:0x700x03isthecommandhead.NewParityistherequiredserialportcommunicationparity.0x00 for no parity, 0x01 for odd parity, 0x02 for even parity, 0x03 for markparity,0x04forspaceparity.Returndata:OldParity.OldParityistheoldparityifsucceed,0xEDiffailed.<SET_HANDSHAKING>Commandstring:0x700x05NewHandShakingMode.Thiscommandisusedtosetthedevice'shandshakingstyle.Thetotallengthis3bytes.Parameters:0x700x05isthecommandhead.NewHandShakingMode is the required serial port communication hand shakingmode.0x00fornohandshakingmode,0x01forXON/XOFFhandshakingmode,0x02forRTS/CTShandshakingmode.Returndata:OldHandShakingMode.OldHandShakingModeistheoldhandshakingmodeifsucceed,0xEDiffailed.<SET_XON_CHAR>Commandstring:0x700x06NewXONChar.Thiscommandisusedtosetthedevice'sXONchar.Thetotallengthis3bytes.Parameters:0x700x06isthecommandhead.NewXONCharistherequiredserialportcommunicationXONchar.Returndata:OldXONChar.OldXONCharistheoldXONcharifsucceed,0xEDiffailed.<SET_XOFF_CHAR>Commandstring:0x700x07NewXOFFChar.Thiscommandisusedtosetthedevice'sXONchar.Thetotallengthis3bytes.Parameters:0x700x07isthecommandhead.NewXOFFCharistherequiredserialportcommunicationXOFFchar.Returndata:OldXOFFChar.
OldXOFFCharistheoldXOFFcharifsucceed,0xEDiffailed.Systemcommand<GET_VERSION>Commandstring:0x01.Thiscommandisusedtogetthesystem'sversion.Thetotallengthis1byte.Parameters:0x01isthecommand.Returndata:versionstring.Thelengthis42bytes.<GET_SERIAL_NUMBER>Commandstring:0x02.Thiscommandisusedtogetthesystem'sserialnumber.Thetotallengthis1byte.Parameters:0x02isthecommand.Returndata:serialnumberstring.Thelengthis32bytes.<BEEP>Commandstring:0x04Duration.Thiscommandisusedtoletthesystem'sbeepertobeepforadesignatedtime.Thetotallengthis2bytes.Parameters:0x04isthecommandheader.Durationisthebeeper'sbeeplasttime.Theunitis100ms.Returndata:0xE0.<LED_CONTROL>Commandstring:0x05LEDON/OFF.Thiscommandisusedtocontrolthesystem'sled.Thetotallengthis3bytes.Parameters:0x05isthecommandheader.LEDistheled'sid.0x000x07isacceptable.ON/OFF:0x01(ON)meansletledtolightonand0x00(OFF)meansletledtolightoff.Returndata:0xE0.

Navigation menu