IDENTIFICATION DEVICE TECHNOLOGY ISC-401 The product is CARDREADER using RF card. User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	2167736
Application ID	2b16Jq4FQ66C7q9TVN/k1g==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.72kB (1396560 bits)
Date Submitted	2014-01-16 00:00:00
Date Available	2014-01-16 00:00:00
Creation Date	2014-01-06 10:45:53
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-01-06 10:45:53
Document Title	Microsoft PowerPoint - ISC-401 User manual Version 1.00 2014.01 Eng [호환 모드]
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

ISC-401
SC 0
User Manual
Version 1.00
2014.01.
COPYRIGHT
Manual COPYRIGHT (C) 2004 IDT Inc. All rights reserved.
The Information in this document is subject to change without notice.
notice IDT Inc.
Inc
reserves the right to revise this document and to make changes from time to time in
the content hereof without obligation to notify any person or persons of such
revisions or changes. The software described in this document is supplied under a
license agreement and is protected by international copyright laws
laws. You may copy it
only for the purpose of backup and use it only as described in the License
agreement. Any implied warranties including any warranties of merchantability or
fitness for a particular purpose are limited to the terms of the express warranties set
out in the license agreement.
agreement
Program COPYRIGHT (C) 2003-2004 IDT Inc. All rights reserved.
Trademarks
BioScan is a registered trademark of IDT Inc.
ISC 101/201/301/401 is a registered trademark of IDT Inc
ISC-101/201/301/401
Inc.
Other products, trademarks or registered trademarks are the property of their
respective owners.
WARNING!
•
15.19:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION
OPERATION.
•
15.21:
The user manual for an intentional or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
•
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH
MODIFICATIONS COULD VOID THE USER’S
USER S AUTHORITY TO OPERATE THE
EQUIPMENT.
•
WARRANTY
Limited Warranty:
All Products sold to Dealer hereunder shall be subject to IDTi standard warranty for
the Product included with the Product by IDTi (“Product Warranty”). The Product Warranty shall be
extended to end user purchasers of the Products from Dealer who purchases such Products within twelve
(12) months of the date the Products are shipped to Dealer. Provided within the aforementioned time
period the warranty period for a Product shall commence upon the date stated in the Product Warranty.
period,
Warranty
Dealer shall not extend any warranty regarding the Products other than IDTi then standard warranty. The
limited warranty statement included in the Product Warranty is the exclusive statement of the controlling
terms and conditions of the limited warranties on the Products. Nothing in this Agreement or any other
written document or any oral communications with Dealer or other parties may alter the terms and
conditions
di i
off the
h Product
P d
Warranty.
IDTi may, in
i its
i sole
l discretion,
di
revise
i its
i limited
li i d warranties
i from
time
to time, however; no change in limited warranties will affect Product orders already accepted by IDTi.
Dealer agrees to only pass on to Dealer’s end-users IDTi limited warranties and Dealer will be liable for
any greater warranty that Dealer purposely or inadvertently transfers to end-users. Dealer will indemnify,
defend and hold IDTi harmless for any
y damages
g or other costs that arise because of Dealer’s failure to
properly inform Dealer’s end-users of current limited warranties.
Warranty Disclaimer: IDTi MAKES NO EXPRESS OR IMPLIED WARRANTIES FOR THE PRODUCTS
EXCEPT THOSE INCLUDED IN THE PRODUCT WARRANTY
WARRANTY. IDTi DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Table of Contents
ISC-401 ………………….……………………..5
CHAPTER 1 …………………………………….9
ENROLL USER, EDIT USER
CHAPTER 2 …………………………………….14
SYSTEM SETUP & EDIT
CHAPTER 3 …………………………………….20
INSTALLATION GUIDE
ISC-401 (Layout)
Camera
Proximity Reader
Speaker
LED Indicator
LCD
Display
Function Key
Program / Scroll Up / Space
Scroll
Down
Backspace / Detail
View
Clear
Escape
Enter
ISC-401 (SPECIFICATION)
ISC-401
SC
Specification
► USER : 131,072
► Log Data : 1,000,000
1 000 000 (Upto 2,000,000)
2 000 000)
Log Image : 10,000 Upto 20,000
► Time Zone : Controller:1024,
Reader Per 1024
► Holiday : 365
► User
Levell : 254
► User Group : 1024
► FAR = 0.00008 %
► FRR = 0.09 %
► CPU :
ARM11 32bit,
ARM 32-bit Cortex™-M3 CPU
► POWER : 12V DC 1A
► SIZE :
- H107 X W186 X D53mm
► Temperature : -10℃~50℃
► Humidity : 10%~90%
► RF Card : ~10 cm
► Communication
i ti : RS-232
RS 232 , TCP/IP,
TCP/IP
Option RS-422(1.2 Km),
► IN/OUT : 4 In / 2 Out
► Material : ABS (Polycarbonate)
Connector Layout
ENTERING THE SYSTEM MENU
When the reader is powered on with no fingerprint templates enrolled in the unit, anyone can enter the system menu
by
yp
pressing
g the F1/p
p key.
y If you
y are enrolling
g the first administrator card via the reader's keypad,
yp , you
y must first
determine the 1~16 digit PIN that the administrator will use. Once this PIN is determined, the administrator must be
present to enroll their card into the reader. Note that this operation is not valid if there are administrator card in the
reader.
Main Menu List
If Administrator has been enrolled
1. Press F1/P key to enter system mode.
Press
to enter system mode
1.
‘F1/P’ or ‘F2’ Key ‘#’ Key.
or Touch Screen
2. Key in administrator ID followed by
the # key Input fingerprint or Card
3. Present either finger or card which ever
administrator has been enrolled with. For
now we will use the fingerprint.
4. Now you're into system mode.
Press F1 key to scroll up the main menu
Press F2 key to scroll down the main
menu
If no Administrator has been enrolled
1.Press F1/P key to enter system mode
2. Now you're into system mode.
Press F1 key to scroll up the main menu
Press F2 key to scroll down the main
menu
CHAPTER 1
USER MANAGEMENT
1. Enroll User ………………...……………………………………10
2. Edit User ………….…………………….…………….……..…..11
3. Delete User ……..………………….…………………………...12
4. Delete All User …….…………………..…………….………...12
5. View User ………………..…………………………..………….13
User Enroll
This command is used to add typical fingerprint only users to the reader so that they will be able to gain entry to the
location g
guarded by
y the reader. The system
has an option
to enroll either 2 or 4 templates
per
p user. The following
g key
sequence performs this action:
1.
Press F1/P key to enter system mode.
Press
2.
7 Present
7.
t fi
firstt fi
finger tto th
the scanner. R
Remove
the fingerprint when the red light turns off.
You can either enroll same fingerprint or
different fingerprint after the first. Repeat this
process until the last fingerprint
to enter system mode
Press ‘#’ Key USER MEMAGEMENT
Select.
3. Press F1/P(UP) or F2 Key Add-menu
Select or Press LCD
Icon
8. Enroll completed. Press the # key to
continue enrolling another user fingerprint
or press any others to exit off the sub-menu
4. Key in user ID from 1 to 16 digits as
shown in next figure
5. Key in user ID followed by the # key
6. System has an option to enroll 1~4
fingerprint templates per each user. For
now we will select number 1~4 key by
enrolling 1~4 templates
Enroll Fingerprint
Enroll Card
NOTE :
There are 2 levels of administration,
1. USER (Level 1) - Corresponds to an ordinary user. They may verify, but are not
allowed to access any
administrative functions.
2. ADMIN (Level 4) - This is an system administrator level and has full rights to
configure the reader.
Edit User
This command is used to edit existing users ID by accessing the user ID. When editing, Administrators have the
ability to make changes to user ID only in this menu.
1.
Press F1/P key to enter system mode.
Press
2.
to enter system mode
7 Present
7.
t fi
firstt fi
finger tto th
the scanner. R
Remove
the fingerprint when the red light turns off.
You can either enroll same fingerprint or
different fingerprint after the first. Repeat this
process until the last fingerprint
Press ‘#’ Key USER MEMAGEMENT
Select.
3. Press F1/P(UP) or F2 Key Edit-menu
Select or Press LCD
Icon
4. Key in user ID from 1 to 16 digits as
shown in next figure
5. Key in user ID followed by the # key
6. System has an option to enroll 1~4
fingerprint templates per each user. For
now we will select number 1~4 key by
enrolling 1~4 templates
8. Enroll completed. Press the # key to
continue enrolling another user fingerprint
or press any others to exit off the sub-menu
Delete User
Deleting a fingerprint template from a reader will prevent
that template from being granted access to the location
via the reader
reader. Any fingerprint template can be removed
from a fingerprint reader, including administrative and the
last remaining fingerprint template on the reader.
Templates can be deleted by a single user or all users
including administrative templates.
1.
Deleting a all user will erase all template from a reader,
including administrative and the last remaining
fingerprint
template on the reader.
1.
Press F1/P key to enter system mode.
Press
to enter system mode
Press F1/P key to enter system mode.
Press
to enter system mode
2.
Press ‘#’ Key USER MEMAGEMENT
Select.
2.
Press ‘#’ Key USER MEMAGEMENT
Select.
3. Press F1/P(UP) or F2 Key Delete All-menu
Select or Press LCD
Icon
3. Press F1/P(UP) or F2 Key Delete-menu
Select
l t or P
Press LCD
IIcon
4. Press ‘OK’ or Press the # key to
confirm delete all
Press any other key to cancel
4. Key in user ID from 1 to 16 digits as
shown in next figure
5. Key in user ID followed by the # key
View User
At any time, you can view a list of all users of the system. The list can be an overall enrollment list of all users in
the system,
system or it can be a list of the individual users that are physically enrolled on any individual fingerprint
reader.
Fingerprint Count
1.
Press F1/P key to enter system mode.
Press
to enter system mode
Memory Index
2.
Press ‘#’ Key USER MEMAGEMENT
Select.
User Id
User Name
Card Number
3. Press F1/P(UP) or F2 Key View-menu
Select or Press LCD
Icon
4. View Enrolled User / Total User.
5. Press F1(UP) or F2(DN) Key.
USER LEVEL
CHAPTER 2
DEVICE SETTING
Terminal Configuration …..…………….…………..………..…15
Terminal Log ………………………………………..…………......16
AUDIO/VIDEO ……………………………………………..….…....17
Network …………………………………...…………..…….……...18
INPUT / OUTPUT ……...……………………………….....……..19
System setup
ADDRESS
1. LOCAL ADDRESS : 1~32
1 32
2. SYSTEM ADDRESS : 0~65535
1.
Press F1/P key to enter system mode.
Press
2.
ADDRESS
TIME
SYSTEMMODE
RELOCKTIME
SYSTEMRESET
OPTION
LANGUAGE
to enter system mode
Press ‘#’
# Key TERMINAL Select
3. Press F1/P(UP)
( ) or F2 Key
y or Press
Touch LCD Menu Select
TIME
System Time Setup
SYSTEM MODE
Device Access Mode Setup
CARD / FINGER
CARD/ ID&FINGER
ID&CARD&FINGER
ID / CARD/ FINGER
FINGER(ID&FINGER)
ID&FINGER
CARD&FINGER
ID&FINGER ID&CARD
ID&FINGER CARD&FINGER
ID&CARD CARD&FINGER
ID / CARD
ID&CARd
CARD
OPEN
CLOSE
SYSTEM RESET
RELOCK TIME
Lock Time Setup
1~99 Sec
OPTION : Access Option Setup
ANTIPASS BACK
KEY SECURE
LOCK DOWN
FUNCTION KEY
DAY DISPLAY TYPE
DURESS
LANGUAGE : Display Language Setup
Log
LOG VIEW
1.
Press F1/P key to enter system mode.
Press
2.
LOGVIEW
INDEXCHANGE
LOGFORMAT
PHOTOFORMAT
to enter system mode
Press ‘#’
# Key SYSTEM LOG Select
3. Press F1/P(UP)
( ) or F2 Key
y or Press
Touch LCD Menu Select
INDEX CHANGE
LOG FORMAT
PHOTO FORMAT
AUDIO/VIDEO
CAMETA
1.
Press F1/P key to enter system mode.
Press
2.
to enter system mode
Press ‘#’
# Key AUDIO/VIDEO Select
CAMERA ENABLE/DISABLE
EVENT MODE ENABLE/DISABLE
BRIGHTNESS
ANGLE
FRAME RETE
DENIED SAVE
PRINTER
TOUCH SCREEN
TOUCH Calibration
INFRARED
CAMETA
PRINTER
TOUCHSCREEN
INFRARED
SERIAL-SPEED
SPKVOLUME
THEMES
3. Press F1/P(UP)
( ) or F2 Key
y or Press
Touch LCD Menu Select
INFRARED ENABLE/DISABLE
FINGER MODE
DETECT LEVEL
SERIAL-SPEED
PC
PRINTER
EXTERNAL 1
EXTERNAL2
SPKVOLUME
THEMES
Network
NET VIEW
1.
Press F1/P key to enter system mode.
Press
2.
to enter system mode
Press ‘#’
# Key NETWORK Select
NET SETUP
System can operate either as Server or Client. If set
as Server then the software must be set as Client
and if set as Client then the software must be set as
Server.
Static/DHCP
IP Address
Gateway
Subnet mask
Port
Server IP Address
Server Port
NETVIEW
NETSETUP
NETSPEED
CALLSERVER
3. Press F1/P(UP)
( ) or F2 Key
y or Press
Touch LCD Menu Select
NET SPEED
0: Auto-negotiation enable with all capabilities
1: Auto-negotiation with 100 BASE-TX FDX/HDX ability
2: Auto-negotiation with 10 BASE-T FDX/HDX ability
3: REV(0-Auto-negotiation enable with all capabilities)
4: Manual selection of 100 BASE-TX
BASE TX FDX
5: Manual selection of 100 BASE-TX HDX
6: Manual selection of 10 BASE-T FDX
7: Manual selection of 10 BASE-T HDX
CALL SERVER
intercom PC server Setup.
INPUT / OUTPUT
SENSOR
These are the senor inputs found in device control panel that control external devices. There are 4
sensor inputs in device and all of them can be programmed to handle different types of external
sensors from the system menu.
RELAY
The relayy output
p is Normally
y Open
p ((N.O.),
), and toggles
gg
shorted when triggered
gg
by
y an event,, such as
an authentication or ID failure. The relay can be used to send power to switched items like electric
door strikes, door handles, magnetic hold locks. The alarm can be used to send signals to a alarm
panel, controllers or indicators.
ALARM
1.
Press F1/P key to enter system mode.
Press
2.
to enter system mode
Press ‘#’ Key INPUT/OUTPUT
Select
There are six sensor inputs and 2 relays outputs in the system. Either one or two relays are used for
g on the configuration,
and the spare
relays
y can be used for annunciating
g alarms
the lock, depending
or other form of control. There is no programming function for alarms what you program is what
happens when a specific alarm occurs. There are two things that can happen as a result of an alarm:
an alarm may result in a message to the speaker (Buzzer).
an alarm may also cause a relay to come on (Relay).
Device has an output to activate a sounder but also equipped with relays that can be controlled from
a command station, by some type of system activity. These sensor inputs & relays can allow you to
perform many functions such as motion sensor or as a means of interfacing with a home automation
system. Only the internal sensors will be activated unless other sensors are connected and
configured in Sensor Setup. Relay must be connected to use the alarm. Refer to Relay Connector.
CARD TYPE
SENSOR
RELAY
ALARM
CARDTYPE
WIEGANDTIME
WIGANDTYPE
1: EM Standard 26bit Card
2: HID Standard 26bit Card
3 HID F
3:
Fullll Bi
Binary 26bi
26bit Card
C d
4: HID IDTi 34bit Card
5: Mifare 32bit UID Card
6: Mifare 34bit iClass
7: Mifare 34bit iClass2
8: Mifare 32bit UID 2
9: Mifare 64bit UID
WIEGAND TIME
Wiegand data output time setup
WIGAND TYPE
1: USER ID
2: USER CARD
3: CARD READER DIRECT OUTPUT
3. Press F1/P(UP) or F2 Key or Press
Touch LCD Menu Select
CHAPTER 3
INSTALL
Connector Layout …..………………………...….…………..…21
Power Connection ……………………….……..……….….........22
Sensor Connection ………………………………..………..…....23
Relay (Lock) Connection …………………….…...…...…...….24
RRE Connection ………….………………………..….....……..25
Card Reader Connection ………………………….…………..26
RS 422 C
RS-422
Connection
ti
…………………………..……….…………28
28
RS-232 Connection ……………………..………………………29
Install Diagram ……………………………..……….…….…....30
CONNECTOR LAYOUT
POWER CONNECTOR
SENSOR CONNECTOR
RELAY (LOCK) CONNECTOR
RRE CONNECTOR
Card Reader 1 Connection
Card Reader 2 Connection
RS422 NETWORK DIAGRAM
RS-232 CONNECTOR
INSTALLATION DIAGRAM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:01:06 10:45:53+09:00
Create Date                     : 2014:01:06 10:45:53+09:00
Format                          : application/pdf
Title                           : Microsoft PowerPoint - ISC-401 User manual Version 1.00 2014.01 Eng [호환 모드]
Creator                         : Administrator
Document ID                     : uuid:d46a327d-a9a5-4385-8266-afae9fc53e40
Instance ID                     : uuid:54c27784-8d1f-4f4f-b4dd-9d476de45de9
Page Count                      : 31
Author                          : Administrator

EXIF Metadata provided by EXIF.tools