IDT Technology CIR600-01 BT connected Speaker Clock User Manual

IDT Technology Limited BT connected Speaker Clock Users Manual

Users Manual

ENRESONANCEClock SpeakerModel: CIR600User ManualThank you for selecting the Oregon ScienticTM RESONANCE Clock Speaker (CIR600). NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specications and warning you should know about.PACKAGE CONTENTS• Main unit x 1• CR2025 battery x 1• AC/DC Power adapter x1• User manual x 1OVERVIEWMAIN UNIT1234 567891011CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 1 2017/10/25 下午2:23
EN1. Volume up; Increase a value in setting mode.2. Volume down; Decrease a value in setting mode;3. Set the alarm; Activate/Cancel the alarm; 4. Activate Bluetooth pairing mode; Toggle between Bluetooth and Aux in audio mode.5. Toggle display mode between time and calendar;Set the time/calendar.6. SNOOZE Snooze the alarm; Dimmer7. DC 12 V, 2.0 A jack Connect AC/DC adapter.8. 5 V, 1A USB port Charge smart device; 9. Aux in Connect to external audio source.10. RESET Returns all settings to factory defaults. 11. Battery compartment: for back-up power source.LCD DISPLAYBAA. Time / Calendar display.B. Second / Weekday display.Symbol DescriptionLow battery indicatorAlarm indicatorBluetooth iconAux inPOWER YOUR CLOCKINSTALL BATTERYThe device comes with a back-up battery installed. Remove the plastic tab before using the clock. Replace the battery when displays.1. Screw off the battery compartment cover.2. Insert a new CR2025 3 V battery, positive (+) side up, and replace the battery compartment cover.3. Press RESET.NOTE• Keep button-cell battery away from children. Swallowing a button-cell battery can be fatal.CONNECT POWER ADAPTERConnect the supplied AC/DC power adapter to the DC 12 V, 2.0 A jack on the rear of the unit and plug into a standard outlet.NOTE• The battery is only for back-up use. Always connect the unit to the power grid source via power adapter.• When the clock is connected to AC power source, it can charge your smart device via the USB port.• Make sure the adapter is not obstructed and is easily accessible to the unit.• To completely disconnect from power, unplug adapter from the mains.SET THE CLOCK TIME1. Press and hold for 3 seconds to enter the clock time setting mode.2. Press or repeatedly to adjust settings; press and hold or to quickly setting.3. Press to conrm and go to the next setting.• The setting order is 12/24 hour format > Hour > Minute > Year > Calendar format (MD/DM) > Month > Day > Weekday language.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 2 2017/10/25 下午2:23
EN1. Volume up; Increase a value in setting mode.2. Volume down; Decrease a value in setting mode;3. Set the alarm; Activate/Cancel the alarm; 4. Activate Bluetooth pairing mode; Toggle between Bluetooth and Aux in audio mode.5. Toggle display mode between time and calendar; Set the time/calendar.6. SNOOZE Snooze the alarm; Dimmer7. DC 12 V, 2.0 A jack Connect AC/DC adapter.8. 5 V, 1A USB port Charge smart device; Firmware update.9. Aux in Connect to external audio source.10. RESET Returns all settings to factory defaults. 11. Battery compartment: for back-up power source. LCD DISPLAYBAA. Time / Calendar display.B. Second / Weekday display.Symbol DescriptionLow battery indicatorAlarm indicatorBluetooth iconAux inPOWER YOUR CLOCKINSTALL BATTERYThe device comes with a back-up battery installed. Remove the plastic tab before using the clock. Replace the battery when displays.1. Screw off the battery compartment cover.2. Insert a new CR2025 3 V battery, positive (+) side up, and replace the battery compartment cover.3. Press RESET.NOTE• Keep button-cell battery away from children. Swallowing a button-cell battery can be fatal.CONNECT POWER ADAPTERConnect the supplied AC/DC power adapter to the DC 12 V, 2.0 A jack on the rear of the unit and plug into a standard outlet.NOTE• The battery is only for back-up use. Always connect the unit to the power grid source via power adapter.• When the clock is connected to AC power source, it can charge your smart device via the USB port.• Make sure the adapter is not obstructed and is easily accessible to the unit.• To completely disconnect from power, unplug adapter from the mains.SET THE CLOCK TIME 1. Press and hold for 3 seconds to enter the clock time setting mode.2. Press or repeatedly to adjust settings; press and hold or to quickly setting.3. Press to conrm and go to the next setting.• The setting order is 12/24 hour format > Hour > Minute > Year > Calendar format (MD/DM) > Month > Day > Weekday language.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 3 2017/10/25 下午2:23
EN• Complete each step with 60 seconds or the device will exit the clock setting mode.• The language options are English (EN), German (GER), French (FR), Italian (IT) and Spanish (SP).ALARMSETTING THE ALARMS1. Press and hold for 2 seconds to enter alarm setting mode. The time digits ash.2. Press or repeatedly to adjust settings; press and hold or to quickly setting.3. Press to conrm and go to the next setting.ACTIVATING / DEACTIVATING THE ALARMPress accordingly for desired option:Time pressing Alarm on/off Operation1Alarm 1 on Set Alarm 12Alarm 2 on Set Alarm 23Both alarms on Set Alarm 1 and 24Both alarms off Turn off Alarm 1 and 2Press and together to review Alarm 1 time.Press and together to review alarm 2 time.SNOOZE / STOP THE ALARM• Press SNOOZE to stop the alarm for 8 minutes. The alarm indicator will ash.• Press to cancel snooze function during snooze status.• When the alarm sounds, press any key except SNOOZE to stop the alarm. The alarm will reactivate the next scheduled alarm time unless deactivated.DIMMERTurn off all the alarms, press SNOOZE to adjust the backlight: normal mid dimBLUETOOTH PAIRING 1. Turn on Bluetooth on your smart device. 2. Open the Bluetooth pairing list on your smart device and select to connect CIR600. The Bluetooth icon displays steady.3. If pairing failure, press and hold on the unit for 2 seconds to enter the Bluetooth pairing mode. The Bluetooth icon ashes and re-pair.NOTE• If the unit is not connected to a device within 5 mintues, the Bluetooth will automatically turn off.• To disconnect the unit from your smart device, disconnect it in the Bluetooth menu of your device. • Bluetooth wireless technology operates within 10 meters (33 ft) range and varies if there are physical obstacles, such as a thick wall in between your smart device and CIR600.LISTEN TO THE MUSIC1. Press to select BT or Aux in music.2. Press or to control sound volume, max volume is 16.3. Press and hold for 3 seconds to mute, volume is 0.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 4 2017/10/25 下午2:23
EN• Complete each step with 60 seconds or the device will exit the clock setting mode.• The language options are English (EN), German (GER), French (FR), Italian (IT) and Spanish (SP).ALARMSETTING THE ALARMS1. Press and hold for 2 seconds to enter alarm setting mode. The time digits ash.2. Press or repeatedly to adjust settings; press and hold or to quickly setting.3. Press to conrm and go to the next setting.ACTIVATING / DEACTIVATING THE ALARMPress accordingly for desired option:Time pressing Alarm on/off Operation1Alarm 1 on Set Alarm 12Alarm 2 on Set Alarm 23Both alarms on Set Alarm 1 and 24Both alarms off Turn off Alarm 1 and 2Press and together to review Alarm 1 time.Press and together to review alarm 2 time.SNOOZE / STOP THE ALARM• Press SNOOZE to stop the alarm for 8 minutes. The alarm indicator will ash.• Press to cancel snooze function during snooze status.• When the alarm sounds, press any key except SNOOZE to stop the alarm. The alarm will reactivate the next scheduled alarm time unless deactivated.DIMMERTurn off all the alarms, press SNOOZE to adjust the backlight: normal mid dimBLUETOOTH PAIRING 1. Turn on Bluetooth on your smart device. 2. Open the Bluetooth pairing list on your smart device and select to connect CIR600. The Bluetooth icon displays steady.3. If pairing failure, press and hold on the unit for 2 seconds to enter the Bluetooth pairing mode. The Bluetooth icon ashes and re-pair.NOTE• If the unit is not connected to a device within 5 mintues, the Bluetooth will automatically turn off.• To disconnect the unit from your smart device, disconnect it in the Bluetooth menu of your device. • Bluetooth wireless technology operates within 10 meters (33 ft) range and varies if there are physical obstacles, such as a thick wall in between your smart device and CIR600.LISTEN TO THE MUSIC1. Press to select BT or Aux in music.2. Press or to control sound volume, max volume is 16.3. Press and hold for 3 seconds to mute, volume is 0.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 5 2017/10/25 下午2:23
ENLISTEN TO AN EXTERNAL AUDIO SOURCE1. Use a 1/8 (3.5 mm) audio cable (not supplied) to connect the audio source’s headphone jack to the Aux in jack on your unit.2. Press to enter AUX IN mode.3. Use the controls on your connected device to play.SPECIFICATIONSInput power 12 V, 2.0 A AC/DC power adapterOutput power 2 x 10 W RMSUSB charging output port 5 V, 1 ABattery CR2025 (for back-up source)Bluetooth Version 4.0L x W x H 200 x 89 x 72.9 mm(7.9 x 3.5 x 2.9 in)Weight 628g (1.4 lb)PRECAUTIONS• Use only fresh battery of the required size and type. • Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.• If you do not plan to use the unit for a long time, remove the battery. Battery can leak chemicals that can damage electronic parts.• Do not subject the device to excessive force, shock, dust, temperature or humidity.• Do not immerse the device in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.• Do not clean the device with abrasive or corrosive materials.• Do not tamper with the device’s internal components. Doing so invalidates the warranty.• Images shown in this manual may differ from the actual display.• When disposing of this product, ensure it is collected separately for special treatment.• The contents of this manual may not be reproduced without the permission of the manufacturer.NOTE The technical specications for this product and the contents of the user manual are subject to change without notice.NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientic.com/customerSupport.php.ABOUT OREGON SCIENTIFICVisit our website www.oregonscientic.com to learn more about Oregon Scientic products. For any inquiry, please contact our Customer Services at info@oregonscientic.com.Oregon Scientic Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail. EU-DECLARATION OF CONFORMITYHereby the manufacturer, IDT Technology Limited, declares that the radio equipment type RESONANCE Clock Speaker (Model: CIR600) is in compliance with 2014/53/EU Directive. The full text of the EU Declaration of Conformity is available at the following internet address: www.oregonscientic.com.COUNTRIES RED APPROVED COMPLIEDAll EU countries, Switzerland CH N and Norway CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 6 2017/10/25 下午2:23
ENLISTEN TO AN EXTERNAL AUDIO SOURCE1. Use a 1/8 (3.5 mm) audio cable (not supplied) to connect the audio source’s headphone jack to the Aux in jack on your unit.2. Press to enter AUX IN mode.3. Use the controls on your connected device to play.SPECIFICATIONSInput power 12 V, 2.0 A AC/DC power adapterOutput power 2 x 10 W RMSUSB charging output port 5 V, 1 ABattery CR2025 (for back-up source)Bluetooth Version 4.0L x W x H 200 x 89 x 72.9 mm(7.9 x 3.5 x 2.9 in)Weight 628g (1.4 lb)PRECAUTIONS• Use only fresh battery of the required size and type. • Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.• If you do not plan to use the unit for a long time, remove the battery. Battery can leak chemicals that can damage electronic parts.• Do not subject the device to excessive force, shock, dust, temperature or humidity.• Do not immerse the device in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.• Do not clean the device with abrasive or corrosive materials.• Do not tamper with the device’s internal components. Doing so invalidates the warranty.• Images shown in this manual may differ from the actual display.• When disposing of this product, ensure it is collected separately for special treatment.• The contents of this manual may not be reproduced without the permission of the manufacturer.NOTE The technical specications for this product and the contents of the user manual are subject to change without notice.NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientic.com/customerSupport.php.ABOUT OREGON SCIENTIFICVisit our website www.oregonscientic.com to learn more about Oregon Scientic products. For any inquiry, please contact our Customer Services at info@oregonscientic.com.Oregon Scientic Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail. EU-DECLARATION OF CONFORMITYHereby the manufacturer, IDT Technology Limited, declares that the radio equipment type RESONANCE Clock Speaker (Model: CIR600) is in compliance with 2014/53/EU Directive. The full text of the EU Declaration of Conformity is available at the following internet address: www.oregonscientic.com.COUNTRIES RED APPROVED COMPLIEDAll EU countries, Switzerland CH N and Norway CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 7 2017/10/25 下午2:23
ENFCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.WARNING Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio / TV technician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientic.com), or on the warranty card for this product) for all inquiries instead.WeName: Oregon Scientic, Inc.Address: Brea Corporate Park 3020 Saturn St. Suite 200 Brea, CA 92821Telephone No.: 1-800-853-8883declare that the product Product No. CIR600Product Name: RESONANCE Clock SpeakerManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong KongINFORMATION FOR USERSPursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2013/56/EU of the European Parliament on batteries and accumulators and waste batteries.The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.Please note that the batteries/rechargeable batteries must be removed from the equipment before it is given as waste. To remove the batteries/accumulators refer to the specications in the user manual. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus.Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 8 2017/10/25 下午2:23
ENFCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.WARNING Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio / TV technician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientic.com), or on the warranty card for this product) for all inquiries instead.WeName: Oregon Scientic, Inc.Address: Brea Corporate Park 3020 Saturn St. Suite 200 Brea, CA 92821Telephone No.: 1-800-853-8883declare that the product Product No. CIR600Product Name: RESONANCE Clock SpeakerManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong KongINFORMATION FOR USERSPursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2013/56/EU of the European Parliament on batteries and accumulators and waste batteries.The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.Please note that the batteries/rechargeable batteries must be removed from the equipment before it is given as waste. To remove the batteries/accumulators refer to the specications in the user manual. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus.Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 9 2017/10/25 下午2:23
ENWARNINGDo not ingest the battery, Chemical Burn Hazard(The remote control supplid with) This product contains a coin/button cell battery. if the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.Keep new and used batteries away from children.If the battery compartment does not close securely, stop using the product and keep it away from children.If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 10 2017/10/25 下午2:23

Navigation menu