IDT Technology MSR939A-01 Remote PIR Motion Sensor User Manual RMR939PA English R7

IDT Technology Limited Remote PIR Motion Sensor RMR939PA English R7

User Manual

POLERMO Projection Clockwith Motion AlertModel: RMR939PA / MSR939AUSER MANUALRMR939PA English Cover R7 10/20/04, 10:34 AM1
EN1CONTENTSIntroduction .............................................................. 2Product Overview .................................................... 3Front View .............................................................. 3Back View .............................................................. 5LCD Display ........................................................... 6Remote Motion Sensor (MSR939A) - Front View .. 8Remote Motion Sensor (MSR939A) - Back View .. 9Safety and Care ...................................................... 10Safety Precautions ............................................... 10Caring for this Product ......................................... 10Getting Started ....................................................... 10Package Contents ............................................... 10Batteries ............................................................... 11AC Adaptor .......................................................... 12About Atomic Clock Reception ............................ 12Turning the Atomic Clock Signal ON / OFF ......... 13Clock / Calendar ..................................................... 13Clock / Calendar Display ..................................... 13Setting the Clock / Calendar ................................ 14Backlight ................................................................. 14Temperature ............................................................ 14Alarm ....................................................................... 15Alarm Display ...................................................... 15Setting the Alarm(s) ............................................. 15Activating / Deactivating the Alarm(s) .................. 15Alarm Sound ........................................................ 15Snooze / Turning the Alarm OFF ......................... 15Motion Alarm .......................................................... 16Motion Alarm Setting Display ............................... 16Setting the Motion Alarm ...................................... 16Turning the Motion Alarm OFF ............................ 17Sleep Timer ............................................................. 17Projection Unit ....................................................... 18Motion Sensor (MSR939A).................................... 18Setup Sensor ....................................................... 18Wake-Up Vibration Alarm - VR101A (Optional) .... 19Resetting the Clock ............................................... 19Warnings ................................................................. 20Troubleshooting ..................................................... 20Technical Specifications ....................................... 21POLERMO Projection Clockwith Motion AlertModel: RMR939PA / MSR939AUSER MANUALRMR939PA English R7 10/20/04, 10:34 AM1
EN2INTRODUCTIONThank you for selecting the Oregon ScientificTMPOLERMO Projection Clock with Motion Alert. Thisdevice is designed to give you many years of reliableservice, including the following conveniences:•US Atomic Calendar Clock•Optional Wireless Vibration Alarm with 8-MinuteSnooze Function (Wake-Up Vibrating AlarmVR101A can be purchased separately)•Sleep Function with 6 Soothing Sounds•5 Alarm Melodies with 2 Volume Levels•2-Minute Dual Alarm with 8-Minute Snooze Function•Time / Alarm Status Projection Unit•Security Alarm / Motion Sensor Unit•Indoor Temperature Display•Day of the Week in 1 of 5 Languages•Time Zone Hour Offset Function•Backlight for ClockKeep this manual handy as you use your new product.It contains practical step-by-step instructions, as wellas technical specifications and warnings you shouldknow.Notices .................................................................... 23Statement of Responsibility ................................. 23About Oregon Scientific ........................................ 23FCC Statement ....................................................... 24Declaration of Conformity .................................... 23RMR939PA English R7 10/20/04, 10:34 AM2
EN3123548761. SOUND / SLEEP button•Press to turn the soothing sound ON.•Press to wrap around the sleep timer setting asfollows: 0 120 90 60 30 15 0 minutes.•Press and hold for 2 seconds to choose 1 of6 soothing sounds.2. SNOOZE / LIGHT button•Press to activate the 8-minute snooze function.•Press and hold for 2 seconds to turn snooze OFFand reset the alarm for the next day.•Press to activate the backlight and projection for5 seconds.3. LCD display4. CLOCK ALARM button•Press to toggle between alarm 1 and alarm 2 -ON / OFF.•Press and hold for 2 seconds to enter the AlarmTime Setting Mode.5. MOTION ALARM button•Press to enter the Motion Alarm Mode; pressagain to toggle between motion alarm ON / OFF.PRODUCT OVERVIEWFRONT VIEWRMR939PA English R7 10/20/04, 10:34 AM3
EN4•Press and hold for 2 seconds to enter:-Motion Sensor Code.-Motion Alarm Setting Mode for motion alarmperiod and alarm type.6. ProjectorProjects time and alarm status.7. CLOCK button•Press to toggle between the following displaymodes:-Clock with seconds and calendar.-Clock with weekday and calendar.-Clock with time zone hour offset and calendar.•Press and hold for 2 seconds to enter theClock Setting Mode - US time zone hour offset,12- / 24-hour format, hour, minute, year, MM / DDor DD / MM format, month, day and day of theweek language.8. UP / DOWN button•Press to increase or decrease a setting.•Press and hold for 2 seconds to activate ordeactivate atomic clock.•Press to increase or decrease the soothing soundvolume.RMR939PA English R7 10/20/04, 10:34 AM4
EN5123456781. Projector FOCUS knob• Twist to focus the projected image.2. Projector IMAGE ROTATION knob• Twist to get the best viewing angle of the projectedimage.3. PROJECTION ON switch• Slide to ON for continuous image projection whenthe AC power is connected.4. Projector 180° ROTATION button• Press to rotate the image upside down.5. 6V AC / DC Power Socket6. Battery Compartment (cover on)• Uses 4 x UM-3 / AA 1.5V batteries.7. RESET hole• Insert a thin blunt instrument to return all valuesto the default settings.8. °C / °F switch• Press to select between °C / °F display format.BACK VIEWRMR939PA English R7 10/20/04, 11:38 AM5
EN6LCD DISPLAY1. SOUND•Appears when the sleep function is activated.2. Battery Low icon•Appears when the clock batteries are low or, nobatteries are installed and only the AC adaptor isconnected.3. Time•HH / MM, 12- / 24-Hour, AM / PM.4. ZONE•Appears when you are in the Time and Zone HourOffset display.5. Channel 1 / 2•Ch.1 or Ch.2 will appear when the related motionsensor is activated.6. Motion Alarm ON icon7. Calendar•DD / MM / YY or MM / DD / YY.8. Temperature•°C / °F.9. Atomic Clock Signal Reception icon• Shows the strength of the reception signal.23567891110121314151617181941RMR939PA English R7 10/20/04, 10:34 AM6
EN710. MIN•Appears when the sleep function is activated.11. Time Zone Hour Offset / Day of the Week•Offsets the atomic clock time setting when youare in a different time zone (+ / -23 hours).•Name of day available in 1 of 5 languages.12. START•Start time for the motion sensor to be activated.13. Alarm 1•Indicator to show this is alarm 1.14. Alarm 1 / 2 Time•Shows alarm times / AM or PM.15. Melody Alarm icon•Shows when the clock alarm is set.16. Vibration Alarm icon (Wake-Up Vibration Alarm -optional item)•Appears on the display when the vibrating alarmhas been set.17. Alarm 2•Indicator to show this is alarm 2.18. STOP•Stop time for the motion sensor.19. Motion Alarm Settings iconRMR939PA English R7 10/20/04, 10:34 AM7
EN9REMOTE MOTION SENSOR (MSR939A) - BACK VIEW1. Wall Mount2. Battery Compartment (cover on)•Uses 3 x UM-3 / AA 1.5V batteries.3. CHANNEL 1 / 2•Slide to select either Channel 1 or Channel 2.4. CODE switch•Slide to change the Code.5. RESET hole•Insert a thin blunt instrument to return all valuesto the default settings.12345RMR939PA English R7 10/20/04, 10:34 AM9
EN10•Keep your product away from hot, humid conditionsor strong sunlight.•Every effort has been made to ensure the higheststandards of reliability for your clock with remotemotion sensor. However, if something does gowrong, please do not try to repair it yourself - consultyour supplier.•Do not use your product outdoors in the rain, orhandle it with wet hands - water can damageelectrical equipment.GETTING STARTEDPACKAGE CONTENTSWhen you unpack your clock with remote motion sensor,make sure you keep all the packing materials in a safeplace, in case you need to later transport the device orreturn it for servicing.In the box, you will find:•Clock Unit•Remote Motion Sensor•4 x UM-3 / AA 1.5V Batteries for the Clock• 6V AC / DC Adaptor for the Clock•3 x UM-3 / AA 1.5V Batteries for the Remote MotionSensorSAFETY AND CARESAFETY PRECAUTIONSPlease observe the following safety precautions whensetting up and using this product.•LCD panel - The LCD panel is made of glass, andmay break if the unit is dropped.•Heat sources - Keep the product away from heatsources, such as radiators, stoves, heaters, andother heat-generating products.•Water and moisture - Do not use the product in ornear water or in high moisture areas, such as abathroom.•Power source - The product may be susceptible topower surges. It should be unplugged during severestorms or whenever you will be away for a long time.Only use the type of power source specified in thismanual. Do not overload power strips and extensioncords, as this can cause a fire hazard.CARING FOR THIS PRODUCTTo ensure you receive the maximum benefit from usingthis product, please observe the following guidelines.•Do not clean any part of the product with benzene,thinner or other solvent chemicals - this may causepermanent damage that is not covered by theguarantee. When necessary, clean it with a dampcloth.RMR939PA English R7 10/20/04, 10:34 AM10
EN11BATTERIESThe clock uses:•4 x UM-3 / AA 1.5V batteries.The motion sensor uses:•3 x UM-3 / AA 1.5V batteries.The optional wake-up vibration alarm VR101A(not included in the package) uses:•2 x UM-3 / AA 1.5V batteries.It is recommended that you use alkalinebatteries with this product for longer performance.To install the batteries, simply insert them making surethey match the correct polarities (+ and -). For bestresults, install batteries in the motion sensor before theclock. Press RESET after each battery change.To install the clock batteries:NOTE To install the motion sensor batteries:Do not use rechargeable batteries for the clockor remote motion sensor.NOTERMR939PA English R7 10/20/04, 10:34 AM11
EN13For best results, place the clock away from metalor electrical objects, and near a window with a clear viewto the sky.TURNING THE ATOMIC CLOCK SIGNAL ON / OFFTo turn the atomic clock signal reception ON:•Press and hold the button for 2 seconds.•The atomic clock reception icon will appear and flashon the display to indicate it is searching for the atomicclock signal.Once batteries have been installed in the clock, thereception icon will flash to indicate it is searching for asignal.When the reception signal has been received thereception icon will show the signal strength by displayingbetween 0 and 3 waves:To turn the atomic clock signal reception OFF:•Press and hold the button for 2 seconds.•The atomic clock reception icon will disappear fromthe display.CLOCK / CALENDARCLOCK / CALENDAR DISPLAYThere are 3 types of clock display:NOTEStrong Signal Weak Signal No SignalCalendar /Clock / SecCalendar /Clock / DayCalendar /Clock / OffsetPress the CLOCK button to toggle between the 3 typesof display.RMR939PA English R7 10/20/04, 10:34 AM13
EN14SETTING THE CLOCK / CALENDARBefore you can manually set the clock and calendar,you must specify the current time zone you live in andthe time format (12- or 24-hour) as follows:1. Press and hold the CLOCK button for 2 seconds.The time zone offset hour digits will flash. The defaultsetting will be -8 which stands for Pacific time. Selectthe following for different US time zones:-7 : Mountain time-6 : Central time-5 : Eastern time6. Press CLOCK ALARM or MOTION ALARM to exitthe Clock Setting Mode.You can select 1 of the 5 following languages:SYMBOL LANGUAGEEnglishGermanFrenchItalianSpanishBACKLIGHTPress SNOOZE / LIGHT to activate the backlight for5 seconds.TEMPERATURETo choose between °C / °F, press the °C / °F button toselect the setting you want.2. Enter the value by pressing the or buttons.3. Confirm the entry by pressing the CLOCK button.The 12- or 24-hour display format will flash.4. Repeat (2) and confirm the entry by pressing theCLOCK button.5. Repeat the above procedures to set the hour, minute,year, MM / DD or DD / MM format, month, day andday of the week language.RMR939PA English R7 10/20/04, 10:34 AM14
EN15Alarm 1 (Melody)Alarm 2 DisabledAlarm 2 (Wake-Up) Alarm 2 Melody+ Wake-UpSETTING THE ALARM(S)1. Press and hold CLOCK ALARM for 2 seconds toenter the Alarm Setting Mode.2. Alarm 1 will start flashing. Use the and buttons to toggle between alarm 1 and 2. Then pressCLOCK ALARM to select alarm 1 or 2. The hourwill start flashing.3. Enter the value by pressing the or buttons.4. Confirm the entry by pressing the CLOCK ALARMbutton and move on to the next setting.5. Repeat (3 and 4) to set alarm 1 / alarm 2 - minute,melody alarm and / or vibration alarm (optional). Ifthe melody alarm is selected, repeat (3 and 4) toselect the melody / beep alarm sound and volume.6. The daily alarm will be on automatically after setting.Press CLOCK at any time to exit the Alarm Setting Mode.ACTIVATING / DEACTIVATING THE ALARM(S)•Press the CLOCK ALARM button to toggle betweenalarm 1 and alarm 2 ON / OFF.•When the melody or vibration alarm icons appearon the display the alarm is activated. When the iconsdo not appear the alarm is deactivated.ALARM SOUNDWhen activated, the alarm icon flashes, the backlightwill come on for 8 seconds and the alarm melody orbeep sound will play. If no key is pressed the alarm willplay for 2 minutes.See "Setting the Alarm(s)" section to choose thealarm melody / beep alarm and / or the vibration alarm.SNOOZE / TURNING THE ALARM OFFTo silence the alarm:• Press SNOOZE / LIGHT to silence it for 8 minutes.The alarm 1 or alarm 2 icon will flash to show snoozeis enabled. Press and hold for 2 seconds to turn offsnooze.OR•Press any key except SNOOZE / LIGHT to mute thealarm and activate it again in 24 hours.NOTEALARMALARM DISPLAYThe melody and vibration alarm icons indicate the dailyalarm settings. Any disabled alarm will show no melodyor vibration alarm icons.RMR939PA English R7 10/20/04, 10:34 AM15
EN16If no button is pressed, the alarm willautomatically silence after 2 minutes. It will then soundagain in 24 hours.MOTION ALARMMOTION ALARM SETTING DISPLAYThe motion sensor icon indicates the motion alarmsetting.NOTE1. Code icon2. Motion Sensor iconSETTING THE MOTION ALARMThe motion alarm has a security / monitoring function,whereby when the motion sensor detects movement, itsets off the clock alarm for 5 minutes and the backlightwill turn on for 10 seconds. The clock will also showwhich sensor has been activated - Ch.1 or Ch.2 willappear in the top left hand corner of the display.You can set the motion alarm to be activated over a setperiod of time i.e. during night time, by entering valuesnext to the Start / Stop Hour in the process detailedbelow. However, it is important that you set the Code onthe clock display to match the Code on the back of themotion sensor(s) so that the items can interact with eachother. This process is also detailed below.1. Press and hold MOTION ALARM for 2 seconds toenter the Motion Alarm Setting Mode.2. The Code will start flashing. Use the and buttonsto choose the same Code setting as that displayedon the back of the motion sensor. Then pressMOTION ALARM to select your chosen option. Thestart hour digits will start flashing.3. Enter the value by pressing the or buttons.4. Confirm the entry by pressing the MOTION ALARMbutton and move on to the next setting.5. Repeat (3 and 4) to set the stop hour, beep / melodyand volume.6. The motion alarm will be on automatically after setting.12RMR939PA English R7 10/20/04, 10:34 AM16
EN17Press CLOCK or CLOCK ALARM at any time to exitthe Motion Alarm Setting Mode.TURNING THE MOTION ALARM OFFPress any button on the clock to turn the motion alarmoff. It will sound again when the remote motion sensorunit detects a motion again.SLEEP TIMERYou can choose 1 of 6 soothing sounds to play for a settime while you fall asleep:•Bird•Wind•River•Raindrop•Waterfall•Ocean WaveTo set the sleep timer and soothing sound volume:1. Press the SOUND / SLEEP button once. Thesoothing sound will turn on and the sleep timer willdisplay the last setting.2. Press the SOUND / SLEEP button to set the sleeptimer to turn off after 120 90 60 30 15 or 0 minutes. When 0 minutes is selected thesoothing sound will automatically turn off after a fewseconds.3. Use the or buttons to change the soothing soundvolume.4. SOUND will flash on the LCD display to indicate thatthe sleep timer is activated.To select the soothing sound:1. Press and hold the SOUND / SLEEP button for2 seconds when the soothing sound is on. Thesoothing sound number will flash.RMR939PA English R7 10/20/04, 10:34 AM17
EN182. Use the or buttons to change the type ofsoothing sound.3. Press the SOUND / SLEEP button to confirm thesetting.PROJECTION UNITThe projection unit can display both time and alarmstatus. To use this feature:•Slide the PROJECTION switch to ON to activatecontinuous projection. However, this function will notwork unless the AC / DC adaptor is used.•Adjust the FOCUS knob to make the image clearer.•Adjust the IMAGE ROTATION knob to rotate theimage clockwise or anti-clockwise.•Manually tilt the projection unit to position the imageor press the 180° ROTATION button to reverse theimage and turn it upside down.NOTE You can also press the SNOOZE / LIGHT buttonto project the time and alarm status for 5 seconds.MOTION SENSOR (MSR939A)The motion sensor has a security / monitoring function.It can set off your motion alarm on the clock for 5 minutesand turn the backlight on for 10 seconds when it detectsmovement.Data can be collected from up to 2 sensors. Additionalsensor sold separately.SETUP SENSOR1. Slide the motion sensor battery door open.2. Insert the batteries, matching the polarity (+ and -)as shown in the battery compartment.SWITCH OPTIONChannel Channel 1-2. If you are using morethan one sensor, select a differentchannel for each sensor.3. Set the channel by sliding the CHANNEL switch to1 or 2. The switch is located in the batterycompartment.4. Set the code by sliding the CODE switches to thesame setting as the Code on the clock display. Thisenables the clock and motion sensor to interact witheach other.RMR939PA English R7 10/20/04, 10:34 AM18
EN195. Press the RESET button. Close the motion sensorbattery compartment.6. Secure the sensor in the desired location using thewall mount or table stand.7. Twist the motion sensor knob to direct the sensor tothe position you want.8. Slide the POWER ON / OFF switch to turn the motionsensor ON or OFF.9. Slide the ALARM SOUND ON / OFF switch to ONto activate the alarm sound function. The motionsensor alarm will now sound for 20 seconds if itdetects movement. Slide to OFF to deactivate thisfunction.Once it has power, the motion sensor takes2 minutes to warm up.For best results:•Insert the batteries and select the channel beforeyou mount the sensor.•Place the sensor out of direct sunlight and moisture.•Do not place the sensor more than 98 feet(30 meters) from the main (indoor) unit.•Position the sensor so that it faces the main (indoor)unit, minimizing obstructions such as doors, walls,and furniture.•Place the sensor in a location with a clear view tothe sky, away from metallic or electronic objects.NOTENOTEYou may need to experiment with various locations toget the best results.WAKE-UP VIBRATION ALARM - VR101A(OPTIONAL)The vibrating alarm receives a signal from the clock andperforms a wake-up function by vibrating. It is designedto go under your pillow.The device has a range of roughly 50 feet and has anLED indicator to show data transmission and batterylevel.The switch within the vibrating alarm can adjust toalarm 1 or alarm 2, or both. Simply select the alarm timeon the clock unit when you want the vibrating alarm towake you up.The vibrating alarm is powered by 2 x UM-3 /AA 1.5V batteries (included). It is also compatible withrechargeable batteries (not included).RESETTING THE CLOCKInsert a thin blunt instrument into the hole below RESETto return to the default settings.RMR939PA English R7 10/20/04, 10:34 AM19
EN20The default settings are:Clock Time: 12.00 PMDate: 1st January 2004Time Offset: -8 (Pacific Time)Alarm 1 and 2 Time: 6.00 AMAlarm Melody: #1 with low volumeDaily Alarms: DisabledMotion Alarm Start Time: 12.00 AMMotion Alarm Stop Time: 6.00 AMMotion Alarm: DisabledDisplay Setting: 12hr, MM / DD, °FWARNINGSThis product is designed to give you years of service ifhandled properly. Oregon Scientific will not beresponsible for any deviations in the usage of the devicefrom those specified in the user instructions or anyunapproved alterations or repairs of the product.Observe the following guidelines:•Never immerse the product in water. This can causeelectrical shock and damage the product.•Do not subject the product to extreme force, shock,or fluctuations in temperature or humidity.• Do not tamper with the internal components.•Do not mix new and old batteries or batteries ofdifferent types.•Do not use rechargeable batteries with this product.•Remove the batteries if storing this product for a longperiod of time.•Do not scratch the LCD display.The technical specification of this product andcontents of this user manual are subject to changewithout notice. Images not drawn to scale.TROUBLESHOOTINGNOTEPROBLEM SYMPTOMClock timeis notcorrectlyset.No atomicclocksignalreception.REMEDYPlace the clock faraway from PCs,phones, and otherelectronic equipmentand near awindowsill. Wait forat least 24 hours.No alarm. Alarm doesnot sound.Turn on the alarmsetting.RMR939PA English R7 10/20/04, 10:34 AM20
EN23NOTICESSTATEMENT OF RESPONSIBILITYOregon Scientific will not be held liable for any bodilyinjury, death, property damages, or any other claims ofwhatever nature resulting from the misuse or negligenceof the product, whether intentional or unintentional.Oregon Scientific will not be responsible for anydeviations in the usage of the device from those specifiedin the user instructions or any approved alternations orrepairs of the product.ABOUT OREGON SCIENTIFICVisit our website (www.oregonscientific.com) to learnmore about Oregon Scientific products such as digitalcameras; MP3 players; children's electronic learningproducts and games; projection clocks; health andfitness gear; weather stations; and digital and conferencephones. The website also includes contact informationfor our customer care department in case you need toreach us, as well as frequently asked questions andcustomer downloads.We hope you will find all the information you need onour website, however if you'd like to contact the OregonScientific Customer Care department directly, pleasevisit:www2.oregonscientific.com/service/supportORCall 949-608-2848 in the US.For international enquiries, please visit:www2.oregonscientific.com/about/international/default.aspRMR939PA English R7 10/20/04, 10:34 AM23
EN24FCC STATEMENTThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received,including interference that may cause undesiredoperation. WARNING Changes or modifications to this unit notexpressly approved by the party responsible forcompliance could void the user's authority to operate theequipment. NOTE This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, thereis no guarantee that interference will not occur in aparticular installation. If this equipment does causeharmful interference to radio or television reception,which can be determined by turning the equipment offand on, the user is encouraged to try to correct theinterference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment andreceiver.•Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.•Consult the dealer or an experienced radio / TVtechnician for help.RMR939PA English R7 10/20/04, 10:34 AM24
EN25DECLARATION OF CONFORMITYThe following information is not to be used as contact forsupport or sales. Please call our customer service number(listed on our website at www.oregonscientific.com), or onthe warranty card for this product) for all inquiries instead.WeName: Oregon Scientific, Inc.Address: 19861 SW 95th Place, Tualatin,Oregon 97062 USATelephone No.: 1-800-853-8883Fax No.: 1-503-684-3332declare that the productProduct No.: RMR939PAProduct Name: POLERMO Projection Clock withMotion AlertManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate,Phase 1, 41 Man Yue St.,Hung Hom, Kowloon,Hong Kongis in conformity with Part 15 of the FCC Rules. Operationis subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received,including interference that may cause undesiredoperation.RMR939PA English R7 10/20/04, 10:34 AM25
© 2004 Oregon Scientific. All rights reserved.P/N: 000-000000-000RMR939PA English Back R7 10/20/04, 10:34 AM1

Navigation menu