IDT Technology NR868A-01 Remote Nightlight with Motion Sensor User Manual JMR868A EN R5

IDT Technology Limited Remote Nightlight with Motion Sensor JMR868A EN R5

User Manual

EN1INTRODUCTIONThank you for selecting the Oregon ScientificTM"Genoa" Motion Activated Clock This device isdesigned to give you many years of reliable service,including the following conveniences:Atomic Calendar ClockTemperature DisplayNightlight with Motion SensorSensor or Manual Activated BacklightUS time zone selection2-Minute Crescendo AlarmHourly Chime FunctionDay of the Week in 1 of 5 LanguagesWall Mount and Table StandKeep this manual handy as you use your new product. Itcontains practical step-by-step instructions, as well astechnical specifications and warnings you should know.CONTENTSIntroduction .......................................................... 1Key Features - Main Unit ..................................... 2Front View / LCD Symbols ................................ 2Back View .......................................................... 2Table Stand ........................................................ 3Key Features - Nightlight withMotion Sensor ...................................................... 3Front View .......................................................... 3Back View .......................................................... 3Safety and Care .................................................... 4Safety Precautions ............................................. 4Caring for this Product ....................................... 4Getting Started ..................................................... 4How Your Clock Works withthe Nightlight - Overview ................................... 4Package Contents .............................................. 4Batteries ............................................................. 4AC Adaptor ......................................................... 5About Atomic Clock Reception .......................... 5Turning the Atomic Clock Reception ON / OFF ....5Clock / Calendar ................................................... 6Clock / Calendar Display ................................... 6Setting the Clock / Calendar .............................. 6Hourly Chime ..................................................... 6Temperature ....................................................... 6Alarm ...................................................................... 6Alarm Display ..................................................... 6Setting the Alarm ............................................... 6Activating / Deactivating the Alarm ................... 7Alarm Sound ...................................................... 7Turning the Alarm Sound Off ............................. 7Clock Backlight .................................................... 7To Manually Turn the Backlight On ................... 7To Activate the Backlight Using theMotion / Light Sensor ......................................... 7To Enable / Disable theRemote-Controlled Clock Backlight .................. 7Nightlight ............................................................... 7Activating the Nightlight Usingthe Mode Button ................................................. 7Activating the Clock Backlight Usingthe Control Button .............................................. 8The Code Switch ................................................ 8The Channel Switch ........................................... 8+ Light - Rotary Knob ......................................... 8Reset Button ...................................................... 8Technical Specifications ..................................... 9Troubleshooting ................................................... 10About Oregon Scientific ...................................... 11FCC Statement ...................................................... 11Declaration of Conformity .................................. 11"Genoa" Motion Activated ClockModel: JMR868A / NR868AUSER MANUALJMR868A_EN_R5 09/17/2004, 14:521
2ENKEY FEATURES - MAIN UNITFRONT VIEW / LCD SYMBOLSBACK VIEW1. Channel 1 / 2Ch.1 or Ch.2 will appear when the related remotenightlight sensor has been activated.2. Alarm On IconAppears when the alarm is enabled.3. ALAppears when you are in the Alarm DisplayMode.4. Alarm / Calendar (DD / MM)Shows alarm time.Shows the date in DD / MM or MM / DD format.5. TimeHH / MM, 12 / 24 Hour, AM / PM.6. Atomic Clock Reception IconShows the strength of the reception signal.7. StartStart-time for the remotely controlled backlightby nightlight with motion sensor.8. Hourly ChimeAppears when the hourly chime is enabled.9. StopStop-time for the remotely controlled backlightby nightlight with motion sensor.10. Battery Low IconAppears when the 2 clock batteries are low.11.Time Zone Offset / Day of the WeekOffsets the atomic time when you are in adifferent US time zone.Name of the day in 1 of 5 languages.12. Temperature˚C / ˚F.13. Light Icon with Battery Low IconAppears when the 2 main backlight batteries arelow.1. Wall Mount Hole2. Table Stand3. Battery CompartmentUses 4 x UM-3 / AA 1.5V batteries.4. LIGHT buttonPress to activate the clock backlight for 5seconds.5. MODE buttonPress to toggle between 3 clock displays.Press and hold to enter Clock Setting Mode -US time zone offset, 12- / 24-hour format, hour,minute, year, DD / MM or MM / DD format,month, day, day-of-the-week language andhourly chime on / off.6. ARROW UP and ARROW DOWN buttonsPress to increase / decrease the value of asetting (in any setting mode).Press and hold to activate / deactivate the atomicclock reception (in normal Display Mode).Press to activate / deactivate the alarm functionwhen the respective alarm is selected.7. ALARM buttonPress to toggle between 3 alarm displays.Press and hold in the respective Alarm DisplayMode to enter its Setting Mode for the dailyalarm, clock Code for the remote nightlightsensor or, the remote-controlled backlight startand stop time.8. ˚C / ˚F - TemperatureSlide to select between ˚C / ˚F display format.9. RESETPress to return all values to the default settings.12561178101213439LIGHT MODE ALARM CRESETFLIGHT MODE ALARM CRESETF132456789JMR868A_EN_R5 09/17/2004, 14:522
EN3123456781234675BACK VIEWTABLE STANDThe clock can be placed on a table using the tablestand.1. Rotary Motion SensorDetects motion and activates the nightlight andclock backlight in accordance with thesettings used.Twist the knob to direct the sensor to the positionyou want.2. Light SensorDetects the light intensity of the environment.3. Light ONPress to turn the clock backlight ON for 10seconds remotely.4. Power - ON / OFFSlide to the appropriate setting to turn the batteryor AC power ON or OFF.5. 4.5V Adaptor Socket6. Light PanelWhen activated the panel will light up.7. LED Indicator1. Wall Mount Hole2. Battery CompartmentUses 3 x UM-3 / AA 1.5V batteries.3. Channel 1 / 2Slide to select either Channel 1 or Channel 2.4. Code switchSlide to change the Code.5. Mode - On / Off / AutoSlide switch to ON - the nightlight will turn on ina dark room.Slide switch to OFF - the nightlight is turned off.Slide switch to AUTO - the nightlight will only beactivated by motion in a dark room.6. Clock Control - On / OffSlide switch to ON - when motion is detected,the clock backlight will be activated.Slide switch to OFF - the clock backlight will notbe activated by the motion sensor.7. + Light - Rotary knobRotate to adjust the sensitivity of the light sensor.8. Reset buttonPress to reset the nightlight.KEY FEATURES - NIGHTLIGHT WITHMOTION SENSORFRONT VIEWJMR868A_EN_R5 09/17/2004, 14:523
4ENSAFETY AND CARESAFETY PRECAUTIONSPlease observe the following safety precautions whensetting up and using this product.LCD panel - The LCD panel is made of glass, andmay break if the unit is dropped.Heat sources - Keep the product away from heatsources, such as radiators, stoves, heaters, andother heat-generating products.Water and moisture - Do not use the product in ornear water or in high moisture areas, such as abathroom.Power source - The product may be susceptible topower surges. It should be unplugged during severestorms or whenever you will be away for a longtime. Only use the type of power source specifiedin this manual. Do not overload power strips andextension cords, as this can cause a fire hazard.CARING FOR THIS PRODUCTTo ensure you receive the maximum benefit from usingthis product, please observe the following guidelines.Do not clean any part of the product with benzene,thinner or other solvent chemicals - this may causepermanent damage that is not covered by theguarantee. When necessary, clean it with a dampcloth.Keep your product away from hot, humid conditionsor strong sunlight.Every effort has been made to ensure the higheststandards of reliability for your clock with remotenightlight. However, if something does go wrong,please do not try to repair it yourself - consult yoursupplier.Do not use your product outdoors in the rain, orhandle it with wet hands - water can damageelectrical equipment.GETTING STARTEDHOW YOUR CLOCK WORKS WITH THENIGHTLIGHT - OVERVIEWThe clock can be set independently to give youtime, calendar and alarm facilities.The nightlight can be set independently to light upin the dark so you can see where you are going.The clock and nightlight can also be used togetherto turn the clock backlight on when you walk into adark room, or wave your arm from the comfort ofyour bed. It can do this because the nightlight has2 types of sensor. One sensor responds to lightand the other responds to movement. From theclock unit you can set these sensors to be activeduring a certain period of time.PACKAGE CONTENTSWhen you unpack your clock with remote nightlight,make sure you keep all the packing materials in a safeplace, in case you need to later transport the device orreturn it for servicing.In the box, you will find:Clock UnitRemote Nightlight4 x UM-3 / AA 1.5V Batteries for the Clock3 x UM-3 / AA 1.5V Batteries for the Nightlight4.5V AC AdapterBATTERIESThe clock uses:4 x UM-3 / AA 1.5V batteries.The nightlight uses:3 x UM-3 / AA 1.5V batteries.NOTE It is recommended that you use alkalinebatteries with this product for longer performance.To install the batteries, simply insert them making surethey match the correct polarities (+ and -).JMR868A_EN_R5 09/17/2004, 14:524
EN5Clock: NOTE The nightlight has a Power ON / OFF switch tohelp conserve power. Use the AC adaptor when usingthe nightlight for long periods of time. The batteriesare a good power source for back-up usage. ABOUT ATOMIC CLOCK RECEPTIONThis clock can automatically synchronize the date andtime with official time-keeping organizations in Boulder,Colorado. The unit can pick up an atomic clock signalwhen it is within 932 miles (1500 km) of Boulder.NOTE For best results, place the unit away from metalor electrical objects, and near a window with a clearview to the sky.TURNING THE ATOMIC CLOCK RECEPTION ON / OFFTo turn the atomic clock reception on:Press and hold the clock button for 2 seconds.The atomic clock reception icon will appear andflash on the display to indicate it is searching forthe atomic clock signal.Once batteries have been installed in the clock, thereception icon will flash to indicate it is searching for asignal.When the reception signal has been received thereception icon will show the signal strength bydisplaying between 0 and 3 waves:To turn the atomic clock reception off:Press and hold the button for 2 seconds.The atomic clock reception icon will disappear fromthe display.Nightlight:NOTE Replace the batteries whenever the low batteryicon is displayed. Change all the batteries at thesame time - it is dangerous to mix old and newbatteries. Protect your environment by takingexhausted batteries to authorized disposal stations. shows on the clock display when the batteriesare low.The LED indicator on the motion sensor will flash inred when the batteries are low.AC ADAPTORThe 4.5V AC adaptor connects to the nightlight asshown below.STRONGSIGNAL WEAK SIGNAL NO SIGNALJMR868A_EN_R5 09/17/2004, 14:525
6ENCalendar /Clock / SecCalendar /Clock / DayCalendar / Clock /Offset TimeCLOCK / CALENDARCLOCK / CALENDAR DISPLAYThere are 3 types of clock display:HOURLY CHIMEThe hourly chime function when set to ON will beeponce at the beginning of every hour, and the chimeicon will show on the display.TEMPERATURETo choose between ˚C / ˚F, slide the switch up or downto the setting you want.The display can show indoor temperatures rangingfrom 23˚F to +122˚F (-5˚C to +50˚C).ALARMALARM DISPLAYThere are 3 types of alarm display:Press the ALARM button to toggle between the 3 typesof display.Press the MODE button to toggle between the 3 typesof display.SETTING THE CLOCK / CALENDARBefore you can manually set the clock and calendar,you must specify the current time zone you live in andthe time format (12- or 24-hour) as follows:1. Press and hold the MODE button for 2 seconds.The time zone offset hour digits will flash. Thedefault setting of the time zone offset hour is -8,which stands for Pacific Time. To change to otherU.S. time zones, select the following:-7 for Mountain Time-6 for Central Time-5 for Eastern Time2. Enter the value by pressing the or buttons.3. Confirm the entry by pressing the MODE button.The 12- or 24-hour display format will flash.4. Repeat (2) and confirm the entry by pressing theMODE button.5. Repeat the above procedures to set the hour,minute, year, MM / DD or DD / MM format, month,day, day-of-the-week language and hourly chime(On / Off).You can select 1 of the 5 following languages:Daily Alarm /ClockStart Time forBacklightactivated byNightlightStop Time forBacklightactivated byNightlightIMPORTANT When you press and hold ALARM for 2seconds to enter the Setting Mode you need to makesure you are in the correct alarm display (see abovefor reference).SETTING THE ALARMTo set the alarm:1. Press and hold the ALARM button for 2 secondswhen the selected alarm is displayed. The hourswill flash.2. Enter the values by pressing or .3. Confirm the entry by pressing the ALARM button.4. The minutes will flash.5. Repeat (2) and (3) to finish the setting. The alarmwill be activated automatically and the alarm icon will appear on the display.SYMBOL LANGUAGEEnglishGermanFrenchItalianSpanishJMR868A_EN_R5 09/17/2004, 14:526
EN7ACTIVATING / DEACTIVATING THE ALARMTo activate or deactivate the alarm:1. Press the ALARM button.2. Press the or button. When the alarm icon appears on the display, the alarm is activated.When the alarm icon does not appear on thedisplay, the alarm is deactivated.ALARM SOUNDWhen activated, the alarm icon flashes, the backlightwill come on for 8 seconds and a beeping noise startsquietly. The alarm gradually becomes louder until itcrescendos at 2 minutes.TURNING THE ALARM SOUND OFFTo turn the alarm sound off and automatically activateit again after 24 hours, press any of the followingbuttons:MODEALARMUPDOWNCLOCK BACKLIGHTTO MANUALLY TURN THE BACKLIGHT ONPress the LIGHT button on the clock, and the backlightwill turn on for 5 seconds.TO ACTIVATE THE BACKLIGHT USING THEMOTION / LIGHT SENSORThe clock backlight can be set up for a certain periodof time to turn on for 10 seconds when a movement isdetected in a dark room. Simply:1. Press the ALARM button twice to get to theBacklight Setting Display.6. The Motion Start Hour will flash.7. Repeat (4) and (5).8. Continue the above procedures to set the MotionStop Hour.2. Press the or buttons to change the setting toeither:NIGHTLIGHTACTIVATING THE NIGHTLIGHT USING THE MODEBUTTONThe nightlight can be activated independently to theclock unit. You can set the nightlight to the followingoptions:1. Nightlight On - When the room is dark the nightlightwill stay on.Slide the Mode button to On.2. Nightlight Off - The nightlight stays off all the time.Slide the Mode button to Off.3. Nightlight Auto - When the nightlight detects motionin a dark room, it will light up for 20 seconds.Slide the Mode button to Auto.Enabled OR Disabled9. When the icon appears on the display, thefunction is activated. When the icon does notappear on the display, the function is deactivated.NOTE Light ON – Press to turn the clock backlightON for 10 seconds remotely.NOTE The nightlight Clock Control switch must beset to On for this function to work.TO ENABLE / DISABLE THE REMOTE-CONTROLLEDCLOCK BACKLIGHT1. Press the ALARM button twice to reach the displaybelow.2. Press and hold the ALARM button for 2 secondsto enter the Backlight Setting Mode.3. The Code setting will flash.4. Press the or buttons to change the setting.(Make sure you select the Code setting thatmatches the Code switch in the back of thenightlight).5. Confirm the entry by pressing the ALARM button.JMR868A_EN_R5 09/17/2004, 14:527
8ENNOTE When the motion sensor on the nightlight isturned on, it needs approximately 2 minutes to warmup before giving a response.ACTIVATING THE CLOCK BACKLIGHT USING THECONTROL BUTTONYou can control the backlight of the clock through thenightlight. You can set the backlight to the followingoptions:1. Control On - The clock backlight is controlled bythe activation of the nightlight.Slide the Clock Control switch to On.2. Control Off - The nightlight does not control theclock backlight.Slide the Clock Control switch to Off.NOTE See the Clock Backlight section, which showsyou how to set the nightlight sensors to be activated attimes specified by you.THE CODE SWITCHThe Code switch on the nightlight must be set to thesame setting as the Code setting on the clock. TheCode allows the nightlight to recognize the clockíssettings.THE CHANNEL SWITCHUp to 2 nightlights can be linked to 1 clock. (Anadditional nightlight can be purchased separately.) Bysetting 1 nightlight to Channel 1 and the other toChannel 2, the clock display can tell you which sensorhas been activated by flashing “ch. 1” or “ch.2” on thedisplay.RESET BUTTONInsert a thin blunt instrument into the hole below Resetto return to the default settings.The default settings are:Clock Time: 12.00 PMDate: 1st January 2004Time Offset: -8 (Pacific Time)Alarm Time: 6.00 AMDaily Alarm: DisabledMotion Alarm Start Time: 12.00 AMMotion Alarm Stop Time: 6.00 AMMotion Alarm: DisabledDisplay Setting: 12hr, MM / DD, ˚F+ LIGHT - ROTARY KNOBThe light sensor’s level of sensitivity can be adjusted.Turn the Light rotary knob towards + to make it moresensitive to light or - to make it less sensitive to light.JMR868A_EN_R5 09/17/2004, 14:528
EN9TECHNICAL SPECIFICATIONSTYPE DESCRIPTIONMain Unit DimensionsL x W x H 11.69 x 0.98 x 6.5 inches (297 x 25 x 165 mm)Weight (without battery) 1.37 lbs (622 g)Remote Unit DimensionsL x W x H 3.46 x 1.69 x 4.41 inches (88 x 43 x 112 mm)Weight (without battery) 0.31 lbs (140 g)TemperatureUnit ˚C / ˚FOperating Range 32˚F to +122˚F (0˚C to +50˚C)Indoor Range 23˚F to +122˚F (-5˚C to +50˚C)Resolution 0.2˚F (0.1˚C)Main Unit Atomic ClockAtomic Clock Frequency System WWVB-60Atomic Clock Synchronization Auto or disabledRF Frequency 433 MHzReception Range 100 feet (30 meters) with no obstructionsSynchronization Auto or disabledRemote UnitMotion Sensor Coverage Distance Approx. 16 feet (5 meters)Motion Sensor Warm-Up Time Approx. 2 minutes after power-onMain Unit DisplayClock HH:MM:SSHH:MM:Day of WeekHH:MM:Time Zone OffsetHour Format 12hr AM / PM or 24hrCalendar DD / MM or MM / DD, user selectable. Weekdayselection in 5 languages (E, D, F, I, S)Alarm 2-minute crescendoPowerMain Unit 4 x UM-3 (AA) 1.5V batteriesRemote Unit 3 x UM-3 (AA) 1.5V batteries or 4.5V AC adaptorNOTE Design and specifications are subject to change without notice.NOTE It is recommended that you use alkaline batteries with this product for longer performance.JMR868A_EN_R5 09/17/2004, 14:529
10ENTROUBLESHOOTINGPROBLEM SYMPTOM REMEDYClock time is notcorrectly setNo atomic clock reception Place the main unit far away from PCs,phones, and other electronic equipmentand near a windowsill. Wait for at least24 hoursNo alarm Alarm does not sound Turn on the alarm settingOperation not normal Certain functions do notperformReset the main unit and theremote nightlightCalendar Strange day Check it is set to your ownlanguageClock Cannot change clock Disable the atomic clock signal and setthe clock manuallyClock / calendar Cannot auto-synchronize theclock 1. Adjust batteries2. Press Reset on the main unitTemperature Shows “LLL” or “HHH” Temperature is out of rangeRemote nightlight Does not activate the clockbacklight1. Adjust batteries / AC adaptor2. Check Control Clock switch, is setto On3. Check the Code switch on thenightlight matches the main unit CodedisplayJMR868A_EN_R5 09/17/2004, 14:5210
EN11ABOUT OREGON SCIENTIFICVisit our website (www.oregonscientific.com) to learnmore about Oregon Scientific products such as digitalcameras; MP3 players; children’s electronic learningproducts and games; projection clocks; health andfitness gear; weather stations; and digital andconference phones. The website also includes contactinformation for our customer care department in caseyou need to reach us, as well as frequently askedquestions and customer downloads.We hope you will find all the information you need onour website, however if you’d like to contact the OregonScientific Customer Care department directly, pleasevisit:www2.oregonscientific.com/service/supportORCall 949-608-2848 in the US.For international enquiries, please visit:http://www2.oregonscientific.com/about/international/default.aspFCC STATEMENTThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) This device must accept any interferencereceived, including interference that may causeundesired operation.Warning: Changes or modifications to this unit notexpressly approved by the party responsible forcompliance could void the user’s authority to operatethe equipment.NOTE: This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference willnot occur in a particular installation. If this equipmentdoes cause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures:Reorient or relocate the receiving antenna.Increase the separation between the equipmentand receiver.Connect the equipment into an outlet on a circuitdifferent from that to which the receiver isconnected.Consult the dealer or an experienced radio / TVtechnician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contactfor support or sales. Please call our customer servicenumber (listed on our website atwww.oregonscientific.com, or on the warranty card forthis product) for all inquiries instead.WeName: Oregon Scientific,Inc.Address: 19861 SW 95th Place,Tualatin, Oregon 97062 USATelephone No.: 1-800-853-8883Fax No.: 1-503-684-8883declare that the productProduct No.: JMR868A / NR868AProduct Name: Atomic Wall Clock with RemoteNightlightManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate,Phase 1,41 Man Yue St.,Hung Hom, Kowloon,Hong Kongis in conformity with Part 15 of the FCC Rules.Operation is subject to the following two conditions: 1)This device may not cause harmful interference. 2)This device must accept any interference received,including interference that may cause undesiredoperation.JMR868A_EN_R5 09/17/2004, 14:5211
"Genoa" Motion Activated ClockModel: JMR868A / NR868AUSER MANUALJMR868A_EN_R5 09/17/2004, 14:5212
2004 Oregon Scienfitic. All rights reserved. P/N: 086-003532-010JMR868A_EN_R5 09/17/2004, 14:5213

Navigation menu