IDT Technology WMR500SA-01 Weather Station User Manual U

IDT Technology Limited Weather Station U

UUser Manual

1ENProfessional all-in-one Weather Station  Model: WMR500USER MANUAL CONTENTSIntroduction .............................................................................................................. 1Packaging Contents  ............................................................................................... 1  All-in-one sensor  .................................................................................................. 1Accessories - sensors ............................................................................................ 2Overview ................................................................................................................... 2  Main unit ................................................................................................................ 2  Real and bottom view ............................................................................................ 2  Lcd display ............................................................................................................ 2  All-in-one sensor ................................................................................................... 3Installation ................................................................................................................ 3 Assemble the  wind sensor ................................................................................... 3  Remove The Tape On The Debris Collector ......................................................... 3  Power the base station .......................................................................................... 4  Power the all-in-one sensor  ................................................................................. 4  Mounting the all-in-one sensor .............................................................................. 4Pairing the sensor  .................................................................................................. 4Pair your smart device with the weather station .................................................. 4Setting the clock time ............................................................................................. 4Moon phase .............................................................................................................. 4Weather forecast ..................................................................................................... 4Temperature and humidity ..................................................................................... 5  Temperature and humidity trend ........................................................................... 5 Wind chill / direction / speed .................................................................................. 5Uv/rainfall/ barometer/pmi ...................................................................................... 5  Rainfall .................................................................................................................. 5  Uv index (optional) ................................................................................................ 5  Barometer  ............................................................................................................ 5  Pmi (optional) ........................................................................................................ 5Backlight .................................................................................................................. 5Reset ......................................................................................................................... 5Maintainance ............................................................................................................ 5Specications .......................................................................................................... 6      Main Unit ............................................................................................................... 6  All-in-one sensor ................................................................................................... 6  Indoor barometer ................................................................................................... 6  Indoor temperature ................................................................................................ 6  Indoor relative humidity ......................................................................................... 6  Outdoor temperature ............................................................................................. 6  Outdoor relative humidity ...................................................................................... 6  Wind sensor  ......................................................................................................... 6  Rain gauge ............................................................................................................ 6Precautions .............................................................................................................. 6About Oregon Scientic ......................................................................................... 7EU-Declaration Of Conformity ................................................................................ 7FCC Statement  ........................................................................................................ 7  Declaration of Conformity ...................................................................................... 7Information for users .............................................................................................. 7INTRODUCTIONThank you for selecting the Oregon Scientic™ Weather Station (WMR500). This product can provide you with weather information through an all-in-one sensor with high levels of accuracy. Download the dedicated app to set up your weather station and experience all of the features of the WMR500. The App remembers the data for a time range for you to monitor and analyze the weather status.The base station is compatible with other weather sensors. To purchase additional sensors, please contact your local retailer. NOTEPlease read this user manual before using your product and keep it for future reference. For the complete operation instructions, please visit http://global.oregonscientic.com/customerSupport.php.PACKAGING CONTENTS1 x Base Station                                             3 x AA UM-3 1.5V batteries                        1x Power AdapterALL-IN-ONE SENSOR                    1x Main unit                                                                     1x Wind cups                                            1x Wind vanein mbMODERATESPEEDkphWIND CHILLWMR500_EN R25.indd   1 2017/3/14   下午2:50
2EN910   4 x AA UM-3                                       1 x U-bolt (with 2 x lock washer &  1.5V batteries          1x Backing metal plate             2 x at washer & 2 x hex nut)   ACCESSORIES - SENSORSThis product can work with other sensors to maximize the performance of your weather station.Optional wireless remote sensors (Oregon  Scientic  brand)  such as those listed below can be purchased separately. For more information, please contact your local retailer.* Please visit our website at www.oregonscientic.com for more details about these sensors.• Dust sensor• UV sensor (UV index )* Features and accessories will not be available in all countries.OVERVIEWMAIN UNIT   1.  SELECT: Switch among the different areas2.  PAIR: Enter and conrm pairing mode3.  MODE/MAIN: Toggle among the different display modes4.  MAX/MIN: Read today max/min memory readings5.  : Increase value; toggle to browse outdoor channels; select pairing mode6.  : Decrease value; toggle to browse outdoor channels; remove sensor; select pairing mode7.  All weather information display area8.  Dot matrix display areaREAL AND BOTTOM VIEW9.  Micro USB power jack10. Battery compartment LCD DISPLAY A. Temperature/Heat Index /Humidity/Dew-point areaB.  Wind speed/Wind direction/ Wind chill areaC.  UVI/ Rainfall / Barometric pressure/Air quality areaD.  Clock /Calendar/Weekday/Moon Phase area1.  Weather  forecast2.  Wi-Fi connection indicator3.  No main power supply4.  Low battery indicator for the sensor5.  Sensor searching indicator6.  Sensor channel7.  Selected area icon8.   Low battery indicator for the base stationA  Temperature/Heat Index /Humidity/Dew-point area1.  Selected area icon2.  Indoor/Outdoor temperature reading (°C for EU/°F for US)3.  Indoor temperature/humidity  indicator4.  Heat index5.  Today Max/Min temperature/heat index6.  Temperature trend7. Dew-point8.  Today Max/Min humidity/dew-point9.  Humidity /dew-point reading10. Humidity trendB  Wind speed/Wind direction/ Wind chill area1.  Wind speed level indicator2.  Wind speed indicator (AVG/GUST)3.  Wind speed reading (m/s, knots, kph or mph)4.  Today max wind speed memory5.  Wind direction indicator6.  Today minimum wind chill7.  Wind speed level descriptionC   UVI/ Rainfall area / Barometric pressure / Air quality area 1. UVI level indicator2. UVI/rainfall reading (UVI; mm; inch; mm/hr; in/hr)3.  Today/Past 24 hours rainfall4.  Rainfall/rain rate indicator5.  UVI indicator6.  Current/Max UVI or rain rate7.  Barometric pressure trend8.  Barometric pressure indicator9.  PM (Particle Matter) reading indicator10. AQI (Air quality index)11. Barometric pressure unit (mb/hPa/mmHg/inHg)12. PM2.5/PM10 unit (μg/m3/ppm)13. AQI level indicator14. Barometric pressure /PM reading D  Clock /Calender/Weekday/Moon Phase area1.  Clock           2.   Date           3.   Weekday      4.   Moon phasein mbMODERATESPEEDkphWIND CHILL12 345678AVGGUSTHEAT INDEX TODAY MAX MINHEAT INDEX TODAY MAX MINDEW-POINT TODAY MAX MINDEW-POINT TODAY MAX MINSTORMSTRONGMODERATELIGHTWIND CHILLkph mph m/s knotsSPEEDPM2.5PM10 AQIPAST24hrs TODAY MAXmbhPammHginHgµg/m³ppmUVImmin/hrLOW MED V.HI EX.HITODAYMINTODAYMAX2 318AB4 5 6C7DHEAT INDEX TODAY MAX MINHEAT INDEX TODAY MAX MINDEW-POINT TODAY MAX MINDEW-POINT TODAY MAX MIN4567 8109123WMR500_EN R25.indd   2 2017/3/14   下午2:50
3ENLCD DISPLAY A. Temperature/Heat Index /Humidity/Dew-point areaB.  Wind speed/Wind direction/ Wind chill areaC.  UVI/ Rainfall / Barometric pressure/Air quality areaD.  Clock /Calendar/Weekday/Moon Phase area1.  Weather  forecast2.  Wi-Fi connection indicator3.  No main power supply4.  Low battery indicator for the sensor5.  Sensor searching indicator6.  Sensor channel7.  Selected area icon8.   Low battery indicator for the base stationA  Temperature/Heat Index /Humidity/Dew-point area1.  Selected area icon2.  Indoor/Outdoor temperature reading (°C for EU/°F for US)3.  Indoor temperature/humidity  indicator4.  Heat index5.  Today Max/Min temperature/heat index6.  Temperature trend7. Dew-point8.  Today Max/Min humidity/dew-point9.  Humidity /dew-point reading10. Humidity trendB  Wind speed/Wind direction/ Wind chill area1.  Wind speed level indicator2.  Wind speed indicator (AVG/GUST)3.  Wind speed reading (m/s, knots, kph or mph)4.  Today max wind speed memory5.  Wind direction indicator6.  Today minimum wind chill7.  Wind speed level descriptionC   UVI/ Rainfall area / Barometric pressure / Air quality area 1. UVI level indicator2. UVI/rainfall reading (UVI; mm; inch; mm/hr; in/hr)3.  Today/Past 24 hours rainfall4.  Rainfall/rain rate indicator5.  UVI indicator6.  Current/Max UVI or rain rate7.  Barometric pressure trend8.  Barometric pressure indicator9.  PM (Particle Matter) reading indicator10. AQI (Air quality index)11. Barometric pressure unit (mb/hPa/mmHg/inHg)12. PM2.5/PM10 unit (μg/m3/ppm)13. AQI level indicator14. Barometric pressure /PM reading D  Clock /Calender/Weekday/Moon Phase area1.  Clock           2.   Date           3.   Weekday      4.   Moon phaseALL-IN-ONE SENSOR 1.  Wind speed sensor: Measures wind speed2.  Level indicator: Indicates whether the sensor is level or needs adjustment 3.  Rain gauge with collector: Takes rainfall readings/ Collects rain4.  UV sensor (not included) location: Take UV readings5.  Solar panel: Provide power to the sensor and prolongs battery life6.  Wind direction vane: Takes wind direction7.  Temperature/Humidity sensor: Measures temperature and humidity readings8.  Dust sensor (not included): Take PM 2.5/PM 10 readings9.  SET NORTH: Calibrate the direction of wind sensor10. RESET: Returns unit to default settings11. Battery compartment for the all-in-one sensor12. Temperature/Humidity sensor location13. Dust sensor location (optional)14. Debris collector15. Screw to open/close the debris collector16. Battery compartment for dust sensor (optional)17. CHANNEL 1, 2, 3: Select sensor channelINSTALLATIONASSEMBLE THE  WIND SENSOR1.  Loosen the screws in the wind cups and wind vane.2.  Insert the top of the wind sensor unit into the wind cups securely with some pressure and then twist the screw tightly.3.  Insert the bottom of the wind sensor unit into the wind vane securely with some pressure and then twist the screw tightly.REMOVE THE TAPE ON THE DEBRIS COLLECTORA debris collector is located under the rain collector and xed by ber tape. Unscrew it and remove the tape before rst time using.   AVGGUSTSTORMSTRONGMODERATELIGHTWIND CHILLkph mph m/s knotsSPEEDTODAYMINTODAYMAX5672431PM2.5PM10 AQIPAST24hrs TODAY MAXmbhPammHginHgµg/m³ppmUVImmin/hrLOW MED V.HI EX.HI111213143456 78910211 2 3 4172345691011121314151617WMR500_EN R25.indd   3 2017/3/14   下午2:50
4ENTo remove a sensor1.  Press and hold SELECT for 3 seconds on the base station, two options will display on the dot matrix display area.  "Do you want to remove sensor x ?  [Yes]: Press DOWN,    [No]: Press MODE/MAIN".2.   Press   to remove/disconnect the specic sensor (channel). NOTE•   Complete the pairing within 30 minutes after you power up or reset the sensor. Otherwise, the base station will stop searching the sensor.•   To replace a specic sensor, remove it before replacing.•   If the new sensor is successfully paired, the new channel number and weather contents will display. Otherwise, the base station will still display the data from the old sensor.•   If the base station cannot receive the weather data from the sensor, or “- -“ displays as the data value. Press and hold PAIR to search the sensor again.   “- -“ means lost link.  “NA” means data not available or data cannot be calculated.PAIR YOUR SMART DEVICE WITH THE WEATHER STATIONYou can view the weather contents and weather forecast,  set the altitude,  select the display units, and review the history data by monthly, weekly, daily and hourly from different sensor channel on the App. Download the AppScan the QR code or search "Oregon Scientic Smart Living"   to nd the App and download on your smart device. The App is available on both Apple App Store and Google Play. Join the Wi-Fi network1.   Make sure your Wi-Fi network is on and your smart device is Wi-Fi connected.2.  Open the App, follow the screen instructions to register an account and log in.3.   Press and hold PAIR for 3 seconds to enter pairing mode, select "Wi-Fi network joining", then press PAIR to conrm.The weather station starts to search the Wi-Fi network. 4.  A message “Joining WiFi network” displays on the dot matrix display area, then immediately tap Start on your smart device.      The following messages appear in steps until successfully paired,  “Joined Wi-Fi network”   “Adding device to account”   “Device added”.5  The current clock time/date/weekday/moon phase will be displayed.6. Tap Add this device on your smart device to bind your account with the weather station.NOTE Always keep Wi-Fi connected for the weather station to store data to the server.SETTING THE CLOCK TIMEThe main unit will automatically synchronize the clock time when connected with our server and App via Wi-Fi.You can also set the language (English, French, German, Italian, Spanish), time zone (-12 to 14) and hour format (12/24 hr) on the App.MOON PHASEFollowing icons illustrate how the moon will appear on the base station.NewMoon Full MoonWaxingCrescent WaningGibbousFirstquarter ThirdquarterWaxingGibbous WaningCrescentNOTE The moon phase displays in opposite orientation if you are in southern hemisphere.WEATHER FORECASTThe weather station displays the current weather within a 30-50 km (19-31 mile) radius. You can view the weather forecast for 7 days on App. ICON DESCRIPTIONSunny Partly cloudyCloudy    RainySnowyPOWER THE BASE STATION1. Insert the 3 AA batteries (included) to the battery compartment of the base station for back-up usage, matching the polarity symbols (+ and -) marked inside.2.  Connect the supplied power adapter to the Micro USB power jack, then plug into a standard AC outlet. NOTE  •   The power adapter is intended to be correctly oriented in a vertical or oor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. The socket-outlet shall be installed near the equipment and shall be easily accessible.POWER THE ALL-IN-ONE SENSOR Insert  the 4 AA batteries (included) to the MAIN UNIT battery compartment, matching the polarity symbols (+ and -) marked inside.(Optional) Install  4 AA batteries (not included) to the DUST SENSOR battery compartment for back-up usage, matching the polarity symbols (+ and -) marked inside. NOTE  •   If you will be connecting more than one all-in-on sensor, slide the channel switch CHANNEL 1, 2, 3 to select another channel before replace the battery compartment cover.•   For longer performance, recommend to use alkaline batteries and consumer grade lithium batteries in temperatures below freezing. •   Replace the batteries when   displays on the base station. Press RESET  after each battery replacement.  MOUNTING THE ALL-IN-ONE SENSORThe sensor is capable of transmitting data to the base station wirelessly within an approximate operating range of 300 m (1000 feet). Ideal locations for the sensor would be in any location on the roof of a building that is in an open area away from trees or other obstructions preventing from the wind ow for an accurate reading. Additionally, locate the sensor in direct sunlight for optimal power supply to the solar panel.      Solar panel facing: If you reside in the:North Southern HemisphereSouth Northern HemisphereSecure the all-in-one sensor connector in the desired location:1.  Align the back of the sensor connector to an existing pole.2.  Secure in place by inserting the ends of the U-bolt into the holes on the sensor connector and securing it with washers and bolts.3.  Securely locate the pole in your desired outdoor area. NOTE•   Make sure the water bubble in the level indicator on the top surface stays within the circle. Check the balance status regularly for an accurate rainfall rate reading.•   Ensure the wind sensor is pointing North to enable it be record accurate readings. Press SET NORTH at the bottom of the sensor to calibrate the direction. You can use a compass to look for an accurate direction of north if necessary.•   Press RESET button on the main unit to erase all testing data.PAIRING THE SENSOR 1.  Press and hold PAIR for 3 seconds on the base station, two pairing options will display on the dot matrix display area.  (1)  Wi-Fi network joining  (2)  Sensor pairing2. Press   or   to select "Sensor pairing", then press PAIR  to  conrm.    A message "Pairing sensor" will display and the base station starts to search for the sensor.  When successfully paired, select the sensor channel on the base station to view the weather contents of the paired sensor.To select a sensor channel1. Press SELECT repeatedly to navigate   icon to any area except the indoor  temperature/heat index/dew-point area.2. Press   or   to select a sensor channel.To add a new sensor or replace the sensor1.    Slide the channel switch to select a channel.2.    Power up or press RESET on the new sensor.3.    Follow the above pairing steps 1-2 to pair the new sensor.TEMPERATURE AND HUMIDITYYou can view the current indoor/outdoor temperature/heat index, humidity, dew-point and the max/min memories on the base station.Select the temperature unit on App: oC (for EU)/oF(for US). To view current temperature, heat index and TODAY MAX/MIN readings on the device:1. Press SELECT repeatedly to navigate   icon to the temperature/heat index area.2.   Press MODE repeatedly to toggle between the temperature/heat index displays.3.   Press MAX / MIN to toggle among current / MAX /MIN readings.4.   Press   or   to change channel (outdoor temperature only).To view humidity, TODAY MAX/MIN and dew-point readings on the device:1.   Press SELECT repeatedly to navigate   icon to the humidity/dew-point area.2.   Press MODE repeatedly to toggle between the humidity/dew-point displays.3.   Press MAX / MIN to toggle among current/MAX/MIN readings.NOTE The heat index provides an indication on how hot it feels based on air temperature and relative humidity.NOTE The dew point advises at what temperature condensation will form.TEMPERATURE AND HUMIDITY TRENDThe trend lines are shown next to the temperature and humidity readings. The trend is shown as follows:RISING STEADY FALLINGWIND CHILL / DIRECTION / SPEEDYou can view and set the numeric wind speed with maximum memory display on our dedicated App.Select the wind units on the App.•   Kilometers per hour (kph)•   Miles per hour (mph)•   Meters per second (m/s)•   Knots (knots)View on the device:The base station provides wind speed and wind direction information.To read the wind direction, nd the compass point   is pointing to.To select wind display mode:Press MODE on wind area to toggle between:•   GUST (Gust)•   AVG (Average)The wind level is shown by a series of text icon:LIGHT MODERATE STRONG STORM2 -8 mph(3-13 km/h) 9-25 mph(14-41 km/h) 26-54 mph(42-87 km/h) >55 mph(>88 km/h)To read the wind direction:Status Wind Direction Indicator MeaningGUST Real-time wind directionAVG Real-time average wind directionAVG  (Max 6 sets) Wind direction of last hourTo view today maximum wind speed and minimum wind chill readings:1. Press SELECT repeatedly to navigate   icon to the wind speed/wind direction/wind chill area.2. Press MAX / MIN to toggle between current/MAX wind speed and current/MIN wind chill readings.NOTE The wind chill factor is based on the combined effects of temperature and wind speed.WMR500_EN R25.indd   4 2017/3/14   下午2:50
5ENTo remove a sensor1.  Press and hold SELECT for 3 seconds on the base station, two options will display on the dot matrix display area.  "Do you want to remove sensor x ?  [Yes]: Press DOWN,    [No]: Press MODE/MAIN".2.   Press   to remove/disconnect the specic sensor (channel). NOTE•   Complete the pairing within 30 minutes after you power up or reset the sensor. Otherwise, the base station will stop searching the sensor.•   To replace a specic sensor, remove it before replacing.•   If the new sensor is successfully paired, the new channel number and weather contents will display. Otherwise, the base station will still display the data from the old sensor.•   If the base station cannot receive the weather data from the sensor, or “- -“ displays as the data value. Press and hold PAIR to search the sensor again.   “- -“ means lost link.  “NA” means data not available or data cannot be calculated.PAIR YOUR SMART DEVICE WITH THE WEATHER STATIONYou can view the weather contents and weather forecast,  set the altitude,  select the display units, and review the history data by monthly, weekly, daily and hourly from different sensor channel on the App. Download the AppScan the QR code or search "Oregon Scientic Smart Living"   to nd the App and download on your smart device. The App is available on both Apple App Store and Google Play. Join the Wi-Fi network1.   Make sure your Wi-Fi network is on and your smart device is Wi-Fi connected.2.  Open the App, follow the screen instructions to register an account and log in.3.   Press and hold PAIR for 3 seconds to enter pairing mode, select "Wi-Fi network joining", then press PAIR to conrm.The weather station starts to search the Wi-Fi network. 4.  A message “Joining WiFi network” displays on the dot matrix display area, then immediately tap Start on your smart device.      The following messages appear in steps until successfully paired,  “Joined Wi-Fi network”   “Adding device to account”   “Device added”.5  The current clock time/date/weekday/moon phase will be displayed.6. Tap Add this device on your smart device to bind your account with the weather station.NOTE Always keep Wi-Fi connected for the weather station to store data to the server.SETTING THE CLOCK TIMEThe main unit will automatically synchronize the clock time when connected with our server and App via Wi-Fi.You can also set the language (English, French, German, Italian, Spanish), time zone (-12 to 14) and hour format (12/24 hr) on the App.MOON PHASEFollowing icons illustrate how the moon will appear on the base station.NewMoon Full MoonWaxingCrescent WaningGibbousFirstquarter ThirdquarterWaxingGibbous WaningCrescentNOTE The moon phase displays in opposite orientation if you are in southern hemisphere.WEATHER FORECASTThe weather station displays the current weather within a 30-50 km (19-31 mile) radius. You can view the weather forecast for 7 days on App. ICON DESCRIPTIONSunny Partly cloudyCloudy    RainySnowyTEMPERATURE AND HUMIDITYYou can view the current indoor/outdoor temperature/heat index, humidity, dew-point and the max/min memories on the base station.Select the temperature unit on App: oC (for EU)/oF(for US). To view current temperature, heat index and TODAY MAX/MIN readings on the device:1. Press SELECT repeatedly to navigate   icon to the temperature/heat index area.2.   Press MODE repeatedly to toggle between the temperature/heat index displays.3.   Press MAX / MIN to toggle among current / MAX /MIN readings.4.   Press   or   to change channel (outdoor temperature only).To view humidity, TODAY MAX/MIN and dew-point readings on the device:1.   Press SELECT repeatedly to navigate   icon to the humidity/dew-point area.2.   Press MODE repeatedly to toggle between the humidity/dew-point displays.3.   Press MAX / MIN to toggle among current/MAX/MIN readings.NOTE The heat index provides an indication on how hot it feels based on air temperature and relative humidity.NOTE The dew point advises at what temperature condensation will form.TEMPERATURE AND HUMIDITY TRENDThe trend lines are shown next to the temperature and humidity readings. The trend is shown as follows:RISING STEADY FALLINGWIND CHILL / DIRECTION / SPEEDYou can view and set the numeric wind speed with maximum memory display on our dedicated App.Select the wind units on the App.•   Kilometers per hour (kph)•   Miles per hour (mph)•   Meters per second (m/s)•   Knots (knots)View on the device:The base station provides wind speed and wind direction information.To read the wind direction, nd the compass point   is pointing to.To select wind display mode:Press MODE on wind area to toggle between:•   GUST (Gust)•   AVG (Average)The wind level is shown by a series of text icon:LIGHT MODERATE STRONG STORM2 -8 mph(3-13 km/h) 9-25 mph(14-41 km/h) 26-54 mph(42-87 km/h) >55 mph(>88 km/h)To read the wind direction:Status Wind Direction Indicator MeaningGUST Real-time wind directionAVG Real-time average wind directionAVG  (Max 6 sets) Wind direction of last hourTo view today maximum wind speed and minimum wind chill readings:1. Press SELECT repeatedly to navigate   icon to the wind speed/wind direction/wind chill area.2. Press MAX / MIN to toggle between current/MAX wind speed and current/MIN wind chill readings.NOTE The wind chill factor is based on the combined effects of temperature and wind speed.UV/RAINFALL/ BAROMETRIC PRESSURE/PMThe station is capable of displaying the UV index, the current or past 24 hours of rainfall, max rain rate, barometric pressure and air quality readings.RAINFALLTo view the recorded rainfall/rain rate of the current hour or past 24 hours:1.   Press SELECT repeatedly to navigate   icon to the UV/Rainfall area.2.   Press MODE repeatedly to select  .3.   Press MAX / MIN repeatedly to toggle among current / today max rain rate, past 24 hours, or today accumulated rainfall readings.Select the measurement unit for the rainfall/rain rate on the App:•   mm (millimeter); in (inch) •   mm/hr (millimeter per hour); In/hr (inch per hour)UV INDEX (OPTIONAL)To view the UV reading:1.   Press SELECT repeatedly to navigate   icon to the UV/rainfall area.2.   Press MODE repeatedly to select  .3.   Press MAX / MIN to toggle between current/MAX UV index display.BAROMETRIC PRESSURE To view the barometric pressure reading:1.  Press SELECT repeatedly to navigate   icon to the barometric pressure/PM area.2.   Press MODE repeatedly to select   .To view pressure trend:The barometric pressure trend icons are based on recent sensor readings.The trend lines are shown next to the pressure readings. The trend is shown as follows:RISING STEADY FALLINGSelect the measurement unit for the barometer on the App:•   Barometric pressure: mmHg (Millimeters of mercury)•   inHg (inches of mercury), mbar  (millibars)•   hPa (hectopascal).Set the altitude level compensation:The altitude  reects  the  distance  from  sea  level  at  your  position.  You  can  set  the altitude level compensation for the barometric pressure readings on the App.NOTE When altitude is set to 0 meter, the pressure reading is the local pressure. If the altitude is set to the current location, the new pressure reading is an offset pressure to the sea level.PM (OPTIONAL)To view the PM reading:1.   Press SELECT repeatedly to navigate   icon to the Barometric pressure/PM area.2.   Press MODE repeatedly to select PM 2.5, PM10, AQI.Select the measurement unit ppm or ug/m3 for the PM on the App.BACKLIGHTPress any button on the base station to activate the backlight.RESETPress and hold   and   together for 5 seconds to return the device to default settings.MAINTAINANCEMaintain the Rain GaugeClean the hole of the rain collector and the debris collector for maintaining accuracy is very important. Unscrew  the debris collector and clean the dirt by water periodically.Maintain the Wind SensorIf the wind cup doesn’t spin in the wind or does not spin as fast as they should.Remove the wind cup and clear out all bugs, spider webs or debris.NOTE Do not apply any uid lubricant on the shaft and bearing. It probably breaks the inner electronic components.WMR500_EN R25.indd   5 2017/3/14   下午2:50
6ENSPECIFICATIONSBASE STATIONDimension (L x W x H) 180 x 90 x 160 mm (7 x 3.54 x 6.3 inches)Weight 427.5 g (0.94 lbs) without batteryBattery    4 x 1.5 V AA batteriesAC/DC Adapter Input: 100-240 V, 50-60 Hz 300 mAOutput: DC 5V, 1000 mAALL-IN-ONE SENSORDimension (L x W x H) 385 x 195 x 315 mm(15.16 x 7.68 x 12.4 inches)Weight 1139 g (2.51 lbs) without batteryRF transmission frequency EU: 868mhz, US: 915mhzNo. of channel 3RF transmission range   250 - 300 m (internal antenna)Transmission Cycle 15 secondsBattery  4 x 1.5 V AA + 4 x 1.5 V AA (optional for dust sensor)Battery life with dust sensor: 6 months (8 x 1.5 V AA)without dust sensor: 12 months (4 x 1.5 V AA) BAROMETRIC PRESSUREUnit mb, inHg, mmHg and hPaMeasuring range 700 – 1050 hPa Accuracy +/- 7 hP aAltitude setting Sea level User setting for offset pressure to sea levelWeather display Sunny, Partly Cloudy, Cloudy,Rainy and SnowyINDOOR TEMPERATURETemperature unit °C / °F (°C for EU, °F for US)Measuring Range -5  to 50 °C  (23 – 122 °F)Accuracy 0 – 40 °C (32 – 104 °F): +/-1 °C (+/- 2 °F)-5 to 0 °C (23 – 32.0 °F): +/-2 °C (+/- 4 °F)40 – 50 °C (104 – 122 °F): +/-2 °C (+/- 4 °F)Resolution 0.1 °C (0.2 °F)Memory Current, Min. and Max.RELATIVE HUMIDITYMeasuring Range 25 % - 90 % RHAccuracy 40 % - 80 % RH: +/-5 % RH25 % - 40 % RH and 80 %- 90 %RH: +/-7 % RHResolution 1 %Memory Current, Min and MaxOUTDOOR TEMPERATURETemp. unit °C / °F  (°C for EU, °F for US)Measuring Range -30 to 60 °C (-22 to 140 °F)Accuracy -20 to 0 °C: +/-2.0 °C (+/- 4.0 °F)0 – 40 °C: +/-1.0 °C (+/- 2.0 °F)40 – 50 °C: +/-2.0 °C (+/- 4.0 °F)50 – 60 °C: +/- 3.0 °C (+/- 6.0 °F)Temperature resolution  0.1°C  (0.2 °F)Memory Current, Min and MaxWIND SENSORWind speed unit m/s, knots, kph, mphSpeed accuracy 2 - 10 m/s (+/-2 m/s)10 - 56 m/s (+/- 10%)Direction resolution 22.5 degreeMemory Max wind speedRAIN GAUGERainfall unit mm , inch (mm for EU, inch for US)Rain rate unit mm/hr and inch/hrMeasuring range for rainfall 0 mm to 9999 mm (0-393.6 inches)Measuring range for rain rate 0, 0.04 in/hr (1mm/hr) to 40 in/hr (1016 mm/hr)Accuracy 0 - 15 mm (0 - 0.6”)/hr : +/- 1 mm/hr (0.04”)15 - 991 mm/hr (0.6 - 39”) : +/- 10 %Memory Past 24 hrs, hourly from last memory resetPRECAUTIONS•   Use only fresh batteries of the required size and type. Do not mix old and new batteries, different types of batteries.•   Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.•   If you do not plan to use the product for a long time, remove the batteries. Batteries can leak chemicals that can damage electronic parts.•   Do  not  subject  the  device  to  excessive  force,  shock,  dust,  temperature  or humidity.•   Do not immerse the device in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.•   Do not clean the device with abrasive or corrosive materials.•   Do not  tamper  with  the  device’s  internal components. Doing so invalidates the warranty.•   Images shown in this manual may differ from the actual display.•   When  disposing  of  this  product,  ensure  it  is  collected  separately  for  special treatment.•   The contents of this manual may not be reproduced without the permission of the manufacturer.NOTE  The  technical  specications  for  this  product  and  the  contents  of  the  user manual are subject to change without notice.NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientic.com/customerSupport.php.ABOUT OREGON SCIENTIFICVisit our website www.oregonscientic.com  to  learn  more  about  Oregon  Scientic products.For any inquiry, please contact our Customer Services at info@oregonscientic.com.Oregon  Scientic  Global  Distribution  Limited  reserves  the  right  to  interpret  and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail.EU-DECLARATION OF CONFORMITYHereby, IDT Technology Limited, declares that Professional all-in-one Weather Station (model: WMR500) is in compliance with the essential requirements and other relevant provisions of Directive RED 2014/53/UE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientic Customer Service.COUNTRIES RED APPROVAL COMPLIEDAll EU countries, Switzerland  CH              and Norway    NFCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interferenceWARNING  Changes  or  modications  not  expressly  approved  by  the  party responsible for compliance could void the user’s authority to operate the equipment.NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio / TV technician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientic.com), or on the warranty card for this product) for all inquiries instead.WeName:     Oregon Scientic, Inc.Address:    Centerpointe CENTER    5 Centerpointe DRIVE, SUITE 400    LAKE OSWEGO, OREGON 97035Telephone No.:   971-204-0378declare that the product Product No.:  WMR500Product Name:  Professional all-in-one Weather StationManufacturer:  IDT Technology LimitedAddress:   Block C, 9/F, Kaiser Estate,         Phase 1, 41 Man Yue St.,        Hung Hom, Kowloon,     Hong KongWMR500_EN R25.indd   6 2017/3/14   下午2:50
7ENWIND SENSORWind speed unit m/s, knots, kph, mphSpeed accuracy 2 - 10 m/s (+/-2 m/s)10 - 56 m/s (+/- 10%)Direction resolution 22.5 degreeMemory Max wind speedRAIN GAUGERainfall unit mm , inch (mm for EU, inch for US)Rain rate unit mm/hr and inch/hrMeasuring range for rainfall 0 mm to 9999 mm (0-393.6 inches)Measuring range for rain rate 0, 0.04 in/hr (1mm/hr) to 40 in/hr (1016 mm/hr)Accuracy 0 - 15 mm (0 - 0.6”)/hr : +/- 1 mm/hr (0.04”)15 - 991 mm/hr (0.6 - 39”) : +/- 10 %Memory Past 24 hrs, hourly from last memory resetPRECAUTIONS•   Use only fresh batteries of the required size and type. Do not mix old and new batteries, different types of batteries.•   Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.•   If you do not plan to use the product for a long time, remove the batteries. Batteries can leak chemicals that can damage electronic parts.•   Do  not  subject  the  device  to  excessive  force,  shock,  dust,  temperature  or humidity.•   Do not immerse the device in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.•   Do not clean the device with abrasive or corrosive materials.•   Do not  tamper  with  the  device’s  internal components. Doing so invalidates the warranty.•   Images shown in this manual may differ from the actual display.•   When  disposing  of  this  product,  ensure  it  is  collected  separately  for  special treatment.•   The contents of this manual may not be reproduced without the permission of the manufacturer.NOTE  The  technical  specications  for  this  product  and  the  contents  of  the  user manual are subject to change without notice.NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientic.com/customerSupport.php.INFORMATION FOR USERSPursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2006/66/EC of the European Parliament on batteries and accumulators and waste batteries.The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.Please note that the batteries/rechargeable batteries must be removed from the equipment before it is given as waste. To remove the batteries/accumulators refer to the specications in the user manual. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back tothe dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment andhealth and optimizes the recycling and reuse of components making up the apparatus.Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.ABOUT OREGON SCIENTIFICVisit our website www.oregonscientic.com  to  learn  more  about  Oregon  Scientic products.For any inquiry, please contact our Customer Services at info@oregonscientic.com.Oregon  Scientic  Global  Distribution  Limited  reserves  the  right  to  interpret  and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail.EU-DECLARATION OF CONFORMITYHereby, IDT Technology Limited, declares that Professional all-in-one Weather Station (model: WMR500) is in compliance with the essential requirements and other relevant provisions of Directive RED 2014/53/UE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientic Customer Service.COUNTRIES RED APPROVAL COMPLIEDAll EU countries, Switzerland  CH              and Norway    NFCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interferenceWARNING   Changes  or  modications  not  expressly  approved  by  the  party responsible for compliance could void the user’s authority to operate the equipment.NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio / TV technician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientic.com), or on the warranty card for this product) for all inquiries instead.WeName:     Oregon Scientic, Inc.Address:    Centerpointe CENTER    5 Centerpointe DRIVE, SUITE 400    LAKE OSWEGO, OREGON 97035Telephone No.:   971-204-0378declare that the product Product No.:  WMR500Product Name:  Professional all-in-one Weather StationManufacturer:  IDT Technology LimitedAddress:   Block C, 9/F, Kaiser Estate,         Phase 1, 41 Man Yue St.,        Hung Hom, Kowloon,     Hong KongWMR500_EN R25.indd   7 2017/3/14   下午2:50

Navigation menu