IDTECK LX007 RFID With Finger Printer User Manual
ID-Teck Co Ltd RFID With Finger Printer LX007 English 071001
a href="https://usermanual.wiki/IDTECK" itemprop="url">
IDTECK >
Contents
- 1. User Manual 2
- 2. User Manual 1
- 3. User Manual 1 2
User Manual 2
![29 assigns both readers (Built-in Reader and Exit Reader) to grant access to the user that is being registered, code ‘1’ only assigns Reader#1 (Built-in Reader) and code ‘2’ assigns Reader#2 (Exit Reader). If you enter ‘1’ in the RD field(Only Reader#1 assigned) and try to exit through Reader#2 (Exit Reader) then the LX007 generates an error message (“Access Door Error”) on the LCD display. 7. C – refers to the ID code. Code ‘0’ is default and codes ‘1’ and ‘2’ are codes used for the TWO MEN MODE. Code ‘3’ is used for the ARM/DISARM function and code ‘4’ is assigned for lost cards. 8. MA – refers to the Operating Mode of the Reader#1 (i.e. the built-in reader) for the cardholder. If you enter ‘1’ for MA, for example, Reader#1 will be operating on RF Only Mode always. • ‘0’ – System Operating Mode (Path: [F1 SETUP MENU] > [READER#1 MODE]) • ‘1’ – ID Only Mode • ‘2’ – ID + Fingerprint (Password) • ‘3’ – ID + Password + Fingerprint 9. MB – refers to Operating Mode of the Reader#2 (Exit Reader) for the cardholder. If you enter ‘1’ for MB, for example, Reader#2 will be operating on RF Only Mode always. • ‘0’ – System Operating Mode (Path: [F1 SETUP MENU] > [READER#1 MODE]) • ‘1’ – ID Only Mode • ‘2’ – ID + Password Mode 10. LV – refers to the Output Operating Level for the cardholder. Output operating time can be set for each user. To configure an Output operating time for each level, refer to the instructions on Output Setting in the [F6 SETUP MENU]. • ‘0’ or ‘1’ – Level #1 • ‘2’ – Level #2 • ‘3’ – Level #3 • ‘4’ – Level #4 11. FP – is the Fingerprint Usage Flag (1 digit). You can decide whether or not the user will register and use a fingerprint. • ‘0’ – User without a Fingerprint • ‘1’ – User with a Fingerprint](https://usermanual.wiki/IDTECK/LX007.User-Manual-2/User-Guide-948882-Page-1.png)