IDTECK RF10A Proximity Reader User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	100590
Application ID	A1uaT5tZmo+YZzbE7G4Kbg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	11.51kB (143873 bits)
Date Submitted	2000-05-16 00:00:00
Date Available	2001-11-16 00:00:00
Creation Date	2000-05-17 01:22:55
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-05-17 01:22:57
Document Title	users manual

MODEL : STAR RF10A
PROXIMITY READER
OWNER’S MANUAL
Please read this instruction manual carefully
Contents
1. Important safety instructions
2. General
3. Specification
4. Connection
5. Operation
6. Block diagram
7. FCC Registration information
8. Warranty and service
---------------- 3
---------------- 4
---------------- 4
---------------- 4
---------------- 5
---------------- 6
---------------- 7
---------------- 8
-2IMPORTANT SAFETY INSTRUCTIONS
When using your door access controller, basing safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to persons including following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product
3. Do not use liquid cleaners, or aerosol cleaners. Use a damp cloth for cleaning. if necessary, use a
mild soap.
4. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool.
5. This product should be operated only from the type of power source indicated on the marking
label. if you are not sure of the type of power supply to your home, consult your dealer or local
power company.
6. Never push objects of any kind into this product though the cabinet slots as they may touch
voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.
7. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified
serviceman when some service or repair work is required. Opening or removing covers may expose
you to dangerous voltages or other risks. incorrect reassembly can cause electric shock when the
appliance is subsequently used.
8. Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the product
c. If the product has exposed to rain or water.
d. If the product doses not operate normally by following the operating instructions.
Adjust only those controls, that are covered by the operating instructions. Improper
adjustment of other controls in damage and will often require extensive work by a qualified
technician to restore the to normal operation.
e. If the product exhibit a distinct change in performance.
-3STAR RF10A Proximity Reader
1. General
The STAR RF10A is a new and an attractive 10cm read range Proximity Reader
which can be used in various industrial applications.(Access control, Factory
automation and extra) It supports Wiegand format and RS232C(option).
This proximity reader will ensure you its successful operations even in harsh
environments (vandal proof). The elegant looking reader case is designed to match
any interior decoration of ultramodern buildings.
Two color LEDs of green and red, inside digital buzzer sound will guarantee you an
accurate system operation
2. Specification
.Input Voltage
.Power
.Modulation
.Cabinet Color
.Output Formats
.Operating Environment
: 12VDC
: 12VDC 60mA(Recommand linear power supply)
: ASK modulation
: Dark Gray
: 26 bits Wiegand, RS232C(Option)
: 0°C ~ 60°C , 10% ~ 90% humidity
3. Connection
RED(+12V)
STAR
RF10
GREEN(DATA0)
WHITE(DATA1)
YELLOW(GND)
CONTROLLER
-4WIRE COLOR TABLE
COLOR
RED
GREEN
WHITE
YELLOW
FUNCTION
+12V
DATA0
DATA1
GND
4. Operation
. Connect DC 12V and Wiegand data lines to STAR RF10A proximity reader.
. Apply power and red LED of RF10A will lit.
. Approach RF card to the reader then reader will beep and green LED will lit
for a second then red LED lit again for next reading sequence.
. Reader will send 26 bits Wiegnad data to access controller.
(RS232C output format OPTION)
-5-
-6-
FCC REGISTRATION INFORMATION
FCC REQUIREMENTS PART 15
Caution: Any changes or modifications in construction of this device which are not
expressly approved by the responsible for compliance cold void the user's authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. these limits are designed to This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the radio or television off and on, the user is encouraged to try to correct interference by
one or more of the following measures:
1. reorient or relocate the receiving antenna.
2. increase the separation between the equipment and receiver.
3. connect the equipment into an outlet on another circuit.
4. consult the dealer or an experienced radio/TV technician for help.
-7-
WARRANTY AND SERVICE
The following warranty and service information applies only to the U.S. For information in other
countries, please contact your local distributor.
To obtain in or out of warranty service, please prepay shipment and return the unit to the appropriate
facility listed below.
IN THE UNITED STATES
RF LOGICS, INC. Service center
3026 SCOTT BLVD,
SANTA CLARA, CA 95054
Tel. : (408) 980-0001
Fax.: (408) 980-8060
Email: webmaster@rflogics.com
Website : www.rflogics.com
OUTSIDE OF THE UNITED STATES
ID TECK CO., LTD. Service center
4F ACE TECHNOTOWER BLDG.
684-1 DUNGCHON-DONG, GANSUH-KU
SEOUL 157-030, KOREA
Tel. : 82-2-659-0055
Fax.: 82-2-659-0086
Email: webmaster@id-teck.com
Website : www.id-teck.com
Please use the original container, or pack the unit(s) in a sturdy carton with sufficient packing to
prevent damage. Include the following information:
1. A proof-of-purchase indicating model number and date of purchase.
2. Bill-to address
3. Ship-to address
4. Number and description of units shipped
5. Name and telephone number of person to call, should contact be necessary
6. Reason for return and description of the problem.
Damage occurring during shipment is deemed the responsibility of the carrier, and claims
should be made directly with the carrier.
-8-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:05:17 01:22:55
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:05:17 01:22:57-04:00
Page Count                      : 9

EXIF Metadata provided by EXIF.tools