IEI Integration WIFI-RT5392-SB Wireless LAN Module User Manual Wireless LAN Module
IEI Integration Corp. Wireless LAN Module Wireless LAN Module
(RT5392) User Manual_20120110
WIFI-RT5392-SB WIFI-RT5392-SB CPU Card IE I Tec hnology C orp. MODE L : WIF I-R T 5392-S B Wireles s L A N Module with R T 5392 s ingle c hip, 2T 2R , s ingle band, R oHS Us er Manual P age 1 R ev. 1.00 - 15 Dec ember, 2011 WIFI-RT5392-SB R evis ion Date Version Changes 15 December, 2011 1.00 Initial release P age 2 WIFI-RT5392-SB C opyright C OP Y R IG HT NOT IC E The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. T R ADE MAR K S All registered trademarks and product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners. P age 3 WIFI-RT5392-SB Table of C ontents 1 INTRODUCTION.......................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 FEATURES ................................................................................................................... 2 1.3 DIMENSIONS ............................................................................................................... 3 1.4 TECHNICAL SPECIFICATIONS ...................................................................................... 4 1.5 PIN DEFINE................................................................................................................. 5 2 UNPACKING ................................................................................................................. 6 2.1 ANTI-STATIC PRECAUTIONS ........................................................................................ 7 2.2 UNPACKING PRECAUTIONS ......................................................................................... 7 2.3 PACKING LIST............................................................................................................. 8 3 SOFTWARE DRIVERS ................................................................................................ 9 3.1 OVERVIEW................................................................................................................ 10 3.2 DRIVER INSTALLATION ............................................................................................. 10 3.3 WIRELESS CONFIGURATION...................................................................................... 13 A HAZARDOUS MATERIALS DISCLOSURE ......................................................... 16 A.1 HAZARDOUS MATERIAL DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002/95/EC W ITHOUT MERCURY ................................... 17 B FCC STANDARDS...................................................................................................... 19 B.1 COMPLIANCE INFORMATION ................................................................................... 20 P age 4 WIFI-RT5392-SB L is t of F igures Figure 1-1: WIFI-RT5392-SB ..........................................................................................................2 Figure 1-2: WIFI-RT5392-SB Dimensions (mm) ...........................................................................3 Figure 3-1: License Agreement ...................................................................................................10 Figure 1-2: Setup Type .................................................................................................................11 Figure 1-3: Configuration Tool ....................................................................................................11 Figure 1-4: Ready to Install the Program ...................................................................................12 Figure 1-5: Setup Status ..............................................................................................................12 Figure 1-6: Installation Complete ................................................................................................13 Figure 1-7: Main Menu ..................................................................................................................13 Figure 1-8: Available Networks ...................................................................................................14 Figure 1-9: Authentication and Encryption ................................................................................14 Figure 1-10: WPA Preshared Key................................................................................................15 P age 5 WIFI-RT5392-SB L is t of Tables Table 1-1: WIFI-RT5392-SB Technical Specifications .................................................................4 Table 1-2: WIFI-RT5392-SB Pinouts ..............................................................................................5 P age 6 WIFI-RT5392-SB Chapter 1 Introduc tion P age 1 WIFI-RT5392-SB 1.1 Introduc tion Figure 1-1: WIFI-RT5392-SB The WIFI-RT5392-SB is a mini PCI-Express half-size wireless LAN module. It complies with the IEEE 802.11b/g/n standard and supports 2Tx/2Rx 2-stream MIMO to enable data rates up to 300Mbps for a 40MHz channel. The integrated PCIE Wi-Fi RT5392 single chip supports 802.11x authentication, WEP 64/128, WPA, WPA2, TKIP, AES, WAPI encryption and guarantees the wireless network security. This product is compatible with a variety of operating systems, including Windows XP, CE6.0, XPE, 2000, Vista 32/64, Windows 7 32/64, Linux and MAC. It has features such as strong signal, long distance transmission, low power consumption, and high performance. 1.2 F eatures Some of the WIFI-RT5392-SB wireless LAN module features are listed below: PCIe Half-Size Mini card 2.4GHz 802.11b/g/n supports 2Tx/2Rx 2-stream MIMO to enable data rates up to 300Mbps for a 40MHz channel. P age 2 20MHz/ 40MHz bandwidth WIFI-RT5392-SB Solid design with external antenna diversity Low power consumption and high performance Supports 802.11x authentication, WEP 64/128, WPA, WPA2, TKIP, AES, WAPI encryption. Supports operating systems-Windows XP, CE6.0, XPE, 2000, Vista 32/64, Windows 7 32/64, Linux, MAC 1.3 Dimens ions The dimensions of WIFI-RT5392-SB are listed below: Width: 28 mm Depth: 30 mm Height: 4 mm Figure 1-2: WIFI-RT5392-SB Dimensions (mm) P age 3 WIFI-RT5392-SB 1.4 Tec hnic al S pecifications WIFI-RT5392-SB technical specifications are listed in table below. Model W IF I-R T 5392-S B Standards IEEE 802.11b/g/n, Wi-Fi compliant Rate 300 Mbps PHY rate in 2T2R mode Interface PCIe Mini card C ontroller C hip Ralink RT5392 Connectors 2 x U.FL (I-PEX) antenna connectors Security WEP 64/128, WPA, WPA2, TKIP, AES, WAPI Frequency Range 2.4GHz Modulation Type 802.11b (DSSS): CCK, DQPSK, DBPSK 802.11g (OFDM): BPSK, QPSK, 16-QAM, 64-QAM 802.11n (OFDM): BPSK, QPSK, 16-QAM, 64-QAM Supported OS Windows XP, CE6.0, XPE, 2000, Vista 32/64, Windows 7 32/64, Linux, MAC Receiver Sensitivity 802.11b: -84dBm (Typical) at 11 Mbps 802.11g: -71dBm (Typical) at 54 Mbps 802.11n: -71dBm (Typical) at 300 Mbps Power Consumption 255mA@3.3V in continuous Tx 495mA@3.3V in continuous Rx Temperature Operating:: -10°C ~ 70°C Storage: -40°C ~ 150°C Humidity Operating:: 10% ~ 90%, non-condensing Storage: 5% ~ 95%, non-condensing Dimensions (W x D x H) 28 mm x 30 mm x 4 mm Weight NW: 11g Table 1-1: WIFI-RT5392-SB Technical Specifications P age 4 WIFI-RT5392-SB 1.5 P in Define The pinouts of WIFI-RT5392-SB are listed below: Pin No. definition Pin No. definition NC 3.3V BT_DATA GND BT_CHCLK 1.5VIN CLKREQ# NC GND 10 NC 11 REFCK_P 12 NC 13 REFCK_M 14 NC 15 GND 16 NC 17 NC 18 GND 19 NC 20 RFTXDIS# 21 GND 22 PERST# 23 PETX0_M 24 NC 25 PETX0_P 26 GND 27 GND 28 1.5VIN 29 GND 30 NC 31 PERX0_P 32 NC 33 PERX0_M 34 GND 35 GND 36 NC 37 GND 38 NC 39 NC 40 GND 41 NC 42 NC 43 GND 44 LD2_YN 45 NC 46 NC 47 NC 48 1.5VIN 49 NC 50 GND 51 NC 52 3.3V Table 1-2: WIFI-RT5392-SB Pinouts P age 5 WIFI-RT5392-SB Chapter 2 Unpac king P age 6 WIFI-RT5392-SB 2.1 Anti-s tatic P recautions WAR NING ! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the WIFI-RT5392-SB. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the WIFI-RT5392-SB or any other electrical component is handled, the following anti-static precautions are strictly adhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging the board. Self-grounding: Touch any grounded conducting material before handling the board. During the time the board is handled, frequently touch any conducting materials that are connected to the ground. Use an anti-static pad: When configuring the WIFI-RT5392-SB, place it on an antic-static pad. This reduces the possibility of ESD damaging the WIFI-RT5392-SB. 2.2 Unpac king P recautions When the WIFI-RT5392-SB is unpacked, please do the following: Follow the antistatic guidelines above. Make sure the packing box is facing upwards so the WIFI-RT5392-SB does not fall out of the box. Make sure all the packing list items are present. P age 7 WIFI-RT5392-SB 2.3 P ac king L is t NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the WIFI-RT5392-SB was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw. The WIFI-RT5392-SB is shipped with the following components: Quantity Item and P art Number WIFI-RT5392-SB Utility CD(drivers and user manual) Quick Installation Guide P age 8 Image WIFI-RT5392-SB Chapter 3 S oftware Drivers P age 9 WIFI-RT5392-SB 3.1 Overview A CD is shipped with the wireless LAN card. The CD contains a user manual and driver for the wireless LAN card. To be able to use the wireless LAN card, please install the driver. Failure to install the driver means that that wireless LAN card cannot be detected by the system. 3.2 Driver Ins tallation To install the wireless LAN driver, please follow the steps below. S tep 1: Insert the CD into a CD drive connected to the system. S tep 2: Double click the Setup.exe S tep 3: The License Agreement screen in Figure 3-1 appears. to install the driver. Figure 3-1: License Agreement S tep 4: Accept the conditions of the license agreement and click NEXT to continue. S tep 5: The Setup Type screen in Figure 1-2 appears. P age 10 WIFI-RT5392-SB Figure 1-2: Setup Type S tep 6: Select “Install driver and Ralink WLAN Utility” and click NEXT to continue. S tep 7: The Configuration Tool screen in Figure 1-3 appears. Figure 1-3: Configuration Tool S tep 8: Select “Ralink Configuration Tool”and click NEXT to continue. S tep 9: The Ready to Install the Program screen in Figure 1-4 appears. P age 11 WIFI-RT5392-SB Figure 1-4: Ready to Install the Program S tep 10: Click Install to proceed with the installation. S tep 11: The Setup Status screen in Figure 1-5 appears and displays the progress of the installation. Figure 1-5: Setup Status S tep 12: When the driver installation is complete, the screen in Figure 1-6 appears. P age 12 WIFI-RT5392-SB Figure 1-6: Installation Complete S tep 13: Click FINISH to complete installation. 3.3 Wireles s C onfiguration After the driver installation is complete, an icon appears at the right down corner of the screen. S tep 1: Double click the icon at the right down corner of the screen to open the configuration tool, as shown in Figure 1-7. Figure 1-7: Main Menu P age 13 WIFI-RT5392-SB S tep 2: Click the search button to search the available wireless networks, as shown in Figure 1-8. Figure 1-8: Available Networks S tep 3: Double click the wireless network name that with the best signal and the known password to open the Profile Settings screen, as shown in Figure 1-9. Figure 1-9: Authentication and Encryption P age 14 WIFI-RT5392-SB S tep 4: Click to continue, as shown in Figure 1-10. Figure 1-10: WPA Preshared Key S tep 5: Enter the password and click to complete the connection setting. P age 15 WIFI-RT5392-SB Appendix A Hazardous Materials Dis c los ure P age 16 WIFI-RT5392-SB A.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only. A label will be placed on each product to indicate the estimated “Environmentally Friendly Use Period” (EFUP). This is an estimate of the number of years that these substances would “not leak out or undergo abrupt change.” This product may contain replaceable sub-assemblies/components which have a shorter EFUP such as batteries and lamps. These components will be separately marked. Please refer to the table on the next page. P age 17 WIFI-RT5392-SB P art Name T oxic or Hazardous S ubs tanc es and E lements L ead Merc ury C admium Hexavalent P olybrominated P olybrominated (P b) (Hg) (C d) C hromium B iphenyls Diphenyl (C R (V I)) (P B B ) E thers (P B DE ) Hous ing Dis play P rinted C irc uit F an As s embly P ower S upply B oard Metal F as teners C able As s embly As s emblies B attery O: This toxic or hazardous substance is contained in all of the homogeneous materials for the part is below the limit requirement in SJ/T11363-2006 X: This toxic or hazardous substance is contained in at least one of the homogeneous materials for this part is above the limit requirement in SJ/T11363-2006 P age 18 WIFI-RT5392-SB ppendix B F C C S tandards P age 19 WIFI-RT5392-SB B .1 Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. P age 20 WIFI-RT5392-SB NOTE: (1) This device is approved for OEM installation with specified antennas as listed in this Manual. It is the responsibility of the Installer to comply with the separation distance for satisfying RF exposure compliance. (2) This device only could work when being installed into “client devices” which could not transmit automatically, such as Notebook P.C., with the software driver limit. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. WARNING: This Wireless Mini PCI Adapter does not support ad-hoc mode Function. P age 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2012:01:09 15:43:58+08:00 Create Date : 2011:12:15 11:48:49+08:00 Metadata Date : 2012:01:09 15:43:58+08:00 Creator Tool : Acrobat PDFMaker 9.1 Word 版 Document ID : uuid:a17c26d1-bc78-4108-9a8a-91cb1b2c1f40 Instance ID : uuid:e6022f1e-e5ea-431d-b73a-768dcdb71d6c Subject : 3 Format : application/pdf Title : Wireless LAN Module Description : WIFI-RT5392-SB Creator : Kelly Gong Producer : Adobe PDF Library 9.0 Keywords : Source Modified : D:20111215034529 Company : IEI Technology Corp. Comments : Headline : WIFI-RT5392-SB Page Layout : OneColumn Page Count : 27 Author : Kelly GongEXIF Metadata provided by EXIF.tools