IKEA of Sweden E1815 Wireless Charger User Manual

IKEA of Sweden AB Wireless Charger

User Manual

Download: IKEA of Sweden E1815 Wireless Charger User Manual
Mirror Download [FCC.gov]IKEA of Sweden E1815 Wireless Charger User Manual
Document ID4191612
Application IDiNyI6rptcm73bhDQsW6lOA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.84kB (135534 bits)
Date Submitted2019-03-06 00:00:00
Date Available2019-03-06 00:00:00
Creation Date2019-03-06 11:38:12
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2019-03-06 11:38:28
Document TitleUser manual.pdf
Document CreatorAdobe InDesign CC 13.1 (Windows)
Document Author: connie.sl.chen

LIVBOJ
ENGLISH
FRANÇAIS
14
ESPAÑOL
22
ENGLISH
Charger features
— USB power adapter(5V min 2A) and USB Type-C
cable not included.
— Wirelessly charges Qi-compatible devices.

     
— Temperature and power monitor for safety.
— LED status indicator.
Instructions for use
— Connect the USB cable to the power adapter and
to LIVBOJ . Plug it into the wall socket.
— For wireless charging, place the device to be
charged on top of the plus sign (+) on the charger.
The device must be placed directly over the plus
sign (+) on the charger for the charging function
to work optimally. Note that on some devices you
may have to activate wireless charging in settings.
— If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal. You can see that the battery has
7
begun charging when the battery symbol appears
on your phone.
LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
! 
Good to know
"#  $ %&' * !'  $ $
speed and performance.
— Devices may get warm during charging; this is
completely normal and they will gradually cool
down again after they are fully charged.
— Charging time may vary based on the device’s
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
— Charger storage temperature: -20°C to 25°C
(-4°F o 77°F).
8
— Charger operating temperature: 0°C to 40°C
(32 °F to 104 °F).
Unplug the charger from the power source before
cleaning and when it is not in use.
To clean the charger, wipe with a moist cloth.
Never submerge the charger in water.
Recommended precautionary measures and technical
data. See the back of the charger.
Save these instructions for future use.
WARNING:
— Only charge devices that are Qi-compatible.
— The wall socket must be located near the
equipment and must be easily accessible.
— Only use in dry locations.
— Children should be supervised to ensure they do
not play with the product.
9
— Never use a damage or faulty USB cable for
charging, since this can damage the appliance and
harm your device.
PRODUCT SERVICING
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.
TECHNICAL DATA
Type: E1815 LIVBOJ
Input: 5V DC, min 2A USB Type-C
Indoor use only
Operating frequency: 110.3KHZ - 148 KHz
Output power: 33 dBμA/m at 3m
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
10
The ‘Qi’ symbol is a trademark of the Wireless Power
Consortium
RF EXPOSURE INFORMATION
RF EXPOSURE
INFORMATION
This
device complies
with RF exposure regulations.
Thisminimum
device complies
with RF
exposure
The
user separation
distance
shallregulations.
be at
The minimum
user separation distance shall be at
least
10 cm.
least 10 cm.
This
with
Part
15 of
Thisdevice
devicecomplies
complies
with
Part
15the
of FCC
the Rules
FCC Rules/
This
device contains
Innovation
Sciencelicence-exempt
and Economictransmitter(s)/receiver(s)
Development
that
complylicence-exempt
with Innovation,RSS
Science
and Economic
Canada’s
standard(s).
Operation is Canada’s
subject to
the followingRSS(s).
two conditions:
Development
licence-exempt
Operation is
(1) thistodevice
may not
cause
harmful interference,
subject
the following
two
conditions:
anddevice may not cause harmful interference, and
(1) this
(2) this device must accept any interference received,
(2)
this device must accept any interference received,
including interference that may cause undesired
including
interference that may cause undesired
operation of the device.
operation of the device.
11
WARNING:
6*$ %     '  
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
12
or television reception, which can be determined
by turning the quipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
13
The crossed-out wheeled bin symbol indicates that the
item should be disposed of separately from household
waste. The item should be handed in for recycling in
accordance with local environmental regulations for
waste disposal. By separating a marked item from
household waste, you will help reduce the volume of
         %9 %   < 
any potential negative impact on human health
and the environment. For more information, please
contact your IKEA store.
FRANÇAIS
14
Caractéristiques du chargeur
— Adaptateur secteur USB (5 V, min. 2 A) et câble
USB type C non inclus.
$    
 

=  >   
— Surveillance de la température et de l'alimentation
pour la sécurité.
— Voyant d'état à LED
Mode d'emploi
— Branchez le câble USB sur l'adaptateur secteur et
le LIVBOJ. Branchez-le dans la prise murale.
'  $  @  < M X
charger sur le dessus du signe plus (+) sur le
chargeur. L'appareil doit être placé directement
sur le signe plus (+) sur le chargeur pour que
la fonction de charge fonctionne de manière
optimale. Notez que sur certains appareils, vous
% = < ' 9[   =   $  %
les paramètres.
15
— Si votre pile est complètement déchargée, la
charge peut commencer après quelques minutes.
C'est tout à fait normal. Vous pouvez voir que la
pile a commencé à se charger lorsque le symbole
de la pile apparaît sur votre téléphone.
Voyant à LED (voir les illustrations) :
1. Mise sous tension : La LED s'allume pendant 3
secondes.
2. Charge : LED allumée.
3. Charge terminée : LED éteinte.
4. Erreur : LED clignotante.
Bon à savoir
 $' '  &' >%'] "# !'  '
la vitesse de charge et les performances.
— Les appareils peuvent devenir chauds pendant
la charge ; c'est tout à fait normal et ils se
refroidiront graduellement après avoir été
complètement chargés.
16
— Le temps de charge peut varier en fonction de
la capacité de la pile de l'appareil, du niveau de
charge, de l'âge de la pile et de la température
dans la zone environnante.
— Température de stockage du chargeur :
de -20 °C à 25 °C (-4°F à 77°F).
— Température de service du chargeur :
de 0 °C à 40 °C (32 °F à 104 °F).
Débranchez le chargeur de la source d'alimentation
avant de le nettoyer et quand il n'est pas utilisé.
Pour nettoyer le chargeur, essuyez-le avec un chiffon
humide.
Ne plongez jamais le chargeur dans l’eau.
Mesures de précaution recommandées et données
techniques.
Voir à l'arrière du chargeur.
Conservez ces instructions pour
une utilisation ultérieure.
17
AVERTISSEMENT :
— Ne chargez que des appareils compatibles Qi.
— La prise murale doit être située à proximité de
l'équipement et être facilement accessible.
— N'utilisez que dans des endroits secs.
— Surveillez toujours les enfants pour vous assurer
qu'ils ne jouent pas avec le produit.
— N'utilisez jamais un câble USB défectueux
ou endommagé pour la charge car cela peut
endommager le dispositif et nuire à votre appareil.
RÉPARATION DU PRODUIT
Ne pas tenter de réparer soi-même ce produit ;
soulever ou retirer le couvercle du boîtier risque
notamment de provoquer des chocs électriques.
DONNÉES TECHNIQUES
Type : E1815 LIVBOJ
Entrée : 5V CC, min. 2 A USB type C
18
Utilisation à l'intérieur uniquement
Fréquence de
fonctionnement : 110,3 KHZ-148 KHz
Puissance de sortie : ^^%_6`X^
Fabricant : IKEA of Sweden AB
Adresse : Box 702, SE-343 81 Älmhult, SUÈDE
Le logo ‘Qi’ est la marque déposée du Wireless Power
Consortium.
INFORMATIONS SUR L’EXPOSITION
AUX RADIOFRÉQUENCES
Cet appareil est conforme aux normes sur l’exposition
aux radiofréquences.
La distance minimum entre l’appareil et l’utilisateur
doit être d’au moins 10 cm.
19
Cet
conforme
à l’article
15 du
de la
Cet appareil
appareilest
est
conforme
à l’article
15règlement
du règlement
de laL’émetteur/récepteur
FCC, ainsi qu’aux normes
Sciences
FCC,
exemptd’Innovation,
de licence contenu
dans
et présent
Développement
économique
Canada
applicables
le
appareil est
conforme aux
CNR d’Innovation,
aux appareils
radio exempts
de licence.
Sciences
et Développement
économique
Canada
Son fonctionnement est autorisé aux deux conditions
applicables
aux
appareils
radio
exempts
de
licence.
suivantes :
L’exploitation
deux conditions
suivantes :
(1) L’appareilest
neautorisée
doit pas aux
produire
de brouillage,
Son
autorisé aux
conditions suivantes :
(2) fonctionnement
L’appareil doitest
accepter
toutdeux
brouillage
(1) L’appareil
ne doit subi,
pas produire
brouillage,
radioélectrique
même de
si cela
est susceptible
(2) L’appareil
doit accepter
brouillage radioélectrique
de compromettre
sontout
fonctionnement.
subi, même si cela est susceptible de compromettre son
fonctionnement.
ATTENTION :
ATTENTION
:   >X
{' $   '%
appareil
sans approbation
expresse
de à
lacet
partie
Tout
changement
ou modification
apportés
appareil
responsable
de la
conformité
peut rendre
nulledelala
sans
approbation
expresse
de la partie
responsable
capacité de l’utilisateur à utiliser cet appareil.
conformité
peut rendre nulle la capacité de l’utilisateur à
utiliser cet appareil.
20
REMARQUE :
Cet appareil a été testé et il est conforme aux
exigences relatives aux appareils électroniques de
classe B, selon la section 15 des règles de la FCC
(Commission fédérale des communications). Ces
exigences sont prévues pour fournir une protection
raisonnable contre les interférences nuisibles dans le
cas d’une installation domestique.
Cet appareil génère, utilise et peut émettre de
l’énergie sous forme de fréquences radio. Si
l’appareil n’est pas installé ou utilisé conformément
aux instructions, il peut provoquer des interférences
perturbant les communications radio. Il est
cependant impossible de garantir l’absence totale
d’interférences d’une installation donnée. Si cet
appareil produit des interférences nuisibles à la
réception radio/télévision, ce qui peut-être déterminé
en mettant successivement l’appareil sous tension
et hors tension, nous conseillons à l’utilisateur
d’essayer de remédier à ce problème en suivant l’une
des procédures suivantes :
21
— Réorienter ou déplacer l’antenne de réception.
— Augmenter la distance entre l’appareil et le
récepteur.
— Brancher l’appareil à une prise placée sur un
circuit différent de celui auquel le récepteur est
raccordé.
— Contacter votre revendeur ou tout technicien
% `{|&' >'
 %  } % 
Le pictogramme de la poubelle barrée indique que le
produit doit faire l’objet d’un tri. Il doit être recyclé
conformément à la réglementation environnementale
locale en matière de déchets. En triant les produits
portant ce pictogramme, vous contribuez à réduire
le volume des déchets incinérés ou enfouis, et à
diminuer tout impact négatif sur la santé humaine et
l’environnement. Pour plus d’information, merci de
contacter votre magasin IKEA.
ESPAÑOL
22
Charger features
— USB power adapter(5V min 2A) and USB Type-C
cable not included.
— Wirelessly charges Qi-compatible devices.

     
— Temperature and power monitor for safety.
— LED status indicator.
Instructions for use
— Connect the USB cable to the power adapter and
to LIVBOJ . Plug it into the wall socket.
— For wireless charging, place the device to be
charged on top of the plus sign (+) on the charger.
The device must be placed directly over the plus
sign (+) on the charger for the charging function
to work optimally. Note that on some devices you
may have to activate wireless charging in settings.
— If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal. You can see that the battery has
23
begun charging when the battery symbol appears
on your phone.
LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
! 
Good to know
"#  $ %&' * !'  $ $
speed and performance.
— Devices may get warm during charging; this is
completely normal and they will gradually cool
down again after they are fully charged.
— Charging time may vary based on the device’s
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
— Charger storage temperature:
-20°C to 25°C (-4°F à 77°F).
24
— Charger operating temperature:
0°C to 40°C (32 °F to 104 °F).
Unplug the charger from the power source before
cleaning and when it is not in use.
To clean the charger, wipe with a moist cloth.
Never submerge the charger in water.
Recommended precautionary measures and technical
data. See the back of the charger.
Save these instructions for future use.
WARNING:
— Only charge devices that are Qi-compatible.
— The wall socket must be located near the
equipment and must be easily accessible.
— Only use in dry locations.
— Children should be supervised to ensure they do
not play with the product.
25
— Never use a damage or faulty USB cable for
charging, since this can damage the appliance and
harm your device.
Product servicing
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.
TECHNICAL DATA
Type: E1815 LIVBOJ
Input: 5V DC, min 2A USB Type-C
Indoor use only
Operating frequency: 110.3KHZ - 148 KHz
Output power: 33 dBμA/m at 3m
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
26
The ‘Qi’ symbol is a trademark of the Wireless Power
Consortium
RF EXPOSURE INFORMATION
This device complies with RF exposure regulations.
The minimum user separation distance shall be at
least 10 cm.
This device complies with Part 15 of the FCC Rules/
Innovation Science and Economic Development
Canada’s licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
27
WARNING:
6*$ %     '  
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
28
or television reception, which can be determined
by turning the quipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
29
The crossed-out wheeled bin symbol indicates that the
item should be disposed of separately from household
waste. The item should be handed in for recycling in
accordance with local environmental regulations for
waste disposal. By separating a marked item from
household waste, you will help reduce the volume of
         %9 %   < 
any potential negative impact on human health
and the environment. For more information, please
contact your IKEA store.
© Inter IKEA Systems B.V. 2018
AA-xxxxxxx-1

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : connie.sl.chen
Create Date                     : 2019:03:06 11:38:12+08:00
Modify Date                     : 2019:03:06 11:38:28+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2019:03:06 11:38:28+08:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:8bbe42e6-9ece-4d7a-b06c-dc8f81f4b5cc
Original Document ID            : xmp.did:FF79E7CA29E2E6119E3AC96A0C80413B
Document ID                     : xmp.id:8499a8fb-c9c7-c542-b183-6fdf7e916129
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:a60c7c14-7f4a-2d48-96b8-2114729b3eae
Derived From Document ID        : xmp.did:ED0F5F807224E911B654B5546D13BE90
Derived From Original Document ID: xmp.did:FF79E7CA29E2E6119E3AC96A0C80413B
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2019:02:25 12:09:42+01:00
Format                          : application/pdf
Title                           : User manual.pdf
Creator                         : connie.sl.chen
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Page Count                      : 30
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FHO-E1815

Navigation menu