IKEA of Sweden ICC-A-1 RF Module User Manual 10 ICC A 1 Module Description IKEA 0 9
IKEA of Sweden AB RF Module 10 ICC A 1 Module Description IKEA 0 9
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3432941 |
| Application ID | u6nTbB4hvPfc6eCR+t9sfQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.92kB (299014 bits) |
| Date Submitted | 2017-06-21 00:00:00 |
| Date Available | 2017-06-21 00:00:00 |
| Creation Date | 2017-06-21 10:37:07 |
| Producing Software | PDFCreator 2.0.1.0 |
| Document Lastmod | 2017-06-21 10:37:07 |
| Document Title | 10. ICC-A-1_Module_Description_IKEA_0 9 |
| Document Creator | PDFCreator 2.0.1.0 |
| Document Author: | hwng |
Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 ICC-A-1 connectivity module description Document ID: SCDOC-129-680 Author’s name: Olof Blomé Approver’s name: Tomas Mellblom Revision 0.1 Author’s name Comment Olof Blomé Document created © Inter IKEA Systems B.V. 2016 Revision date 2017-04-24 Page 1 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 Contents ICC-A-1 module description .............................................................................. 4 1.1 Description of ICC-A-1 ............................................................................... 4 1.2 Pin description .......................................................................................... 6 1.3 Radio front-end and crystal ........................................................................ 7 1.4 Type approval markings............................................................................. 7 1.5 Module physical size and footprint............................................................... 8 1.6 Mounting options ...................................................................................... 8 Design rules for antenna integration .................................................................. 9 2.1 Distance to metal objects......................................................................... 10 2.2 Distance to plastic objects........................................................................ 10 2.3 Grounding of metal heat sink.................................................................... 11 2.4 Module mounting options ......................................................................... 12 Power supply for ICC-A-1 ............................................................................... 13 3.1 Regulated power supply........................................................................... 13 3.2 Coin cell battery operation ....................................................................... 13 Electrical specifications ................................................................................... 15 4.1 Absolute maximum ratings....................................................................... 15 4.2 Recommended operating conditions .......................................................... 15 4.3 Environmental ........................................................................................ 15 4.4 Transceiver characteristics ....................................................................... 16 4.5 Wake up timing ...................................................................................... 16 4.6 General purpose input/output ................................................................... 16 Regulatory instructions................................................................................... 17 5.1 Limitations ............................................................................................. 17 5.2 User manual........................................................................................... 17 © Inter IKEA Systems B.V. 2016 Page 2 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 5.3 Revision: 0.1 Revision date: 2017-04-24 Label ..................................................................................................... 17 Certification .................................................................................................. 18 6.1 FCC statement........................................................................................ 18 6.2 Industry Canada statement ...................................................................... 19 Figures Figure 1 - Module with shield can ............................................................................ 5 Figure 2 - Overview pin out numbering for ICC-A-1 ................................................... 6 Figure 3 - Silkscreen printing .................................................................................. 7 Figure 5 - Physical dimensions of the ICC-A-1 module ............................................... 8 Figure 6 - Antenna area front and back of module ..................................................... 9 Figure 7 - Metal free area to secure antenna performance ........................................ 10 Figure 8 - Suggested grounding point .................................................................... 11 Figure 9 - Grounding point for heatsink .................................................................. 12 Figure 10 - Mounted 90 degree angle .................................................................... 13 Figure 11 - Flat board-to-board connection............................................................. 13 © Inter IKEA Systems B.V. 2016 Page 3 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 ICC-A-1 module description The IKEA Trådfri connectivity module is a low cost Zigbee module with integrated antenna and highly flexible input / output options. The ICC-A-1 is a power-optimized version of the IKEA ICC-1 module. The modules is certified and qualified to be directly integrated into a product, simplifying design and reducing time to market. The module is built around the latest generation of 802.15.4 radio SOC the EFR32 from Silicon Labs. The module can be operated in between -40 degrees C and +125 degrees C making it suitable for high temperature application such as LED light control. • IEEE Std- 802.15.4 compliant RF transceiver • Supports ZigBee / Bluetooth Low Energy (BLE) / Thread on 2.4 GHz ISM band • Output power maximum 10 dBm e.i.r.p and sensitivity up to -96 e.i.r.p with builtin PCB antenna • Operational within -40°C to 125°C • Module size is approximately 18.0 mm x 24.5 mm 1.1 • Description of ICC-A-1 2.4 GHz 802.15.4 compliant module with multiple mounting options and configurations. • 17 connections, 6 pins on the left and 10 pins on the right. • 11 connections can be used as General-purpose input/output (GPIO) connections. • Working temperature range -40° C to +125° C. • Built-in thermistor to compensate crystal drift to control temperature variations. © Inter IKEA Systems B.V. 2016 Page 4 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 Figure 1 - Module with shield can © Inter IKEA Systems B.V. 2016 Page 5 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 1.2 Revision: 0.1 Revision date: 2017-04-24 Pin description The pin out is flexible and all pins can be configured as analogue port or data channel, such as I2C. Each GPIO has its own mux configuration and set of PU and PD. The software is defied for each product. The pin number is counted from the lower left corner, see Figure 2. 16 15 14 13 12 11 10 Figure 2 - Overview pin out numbering for ICC-A-1 Pin description Pin number Logic number GND Notes Pin number 10 Logic number RESETn Notes PB15 GPIO 11 VDD Power supply PB14 GPIO 12 GND Ground PC10 GPIO 13 PB13 GPIO PC11 GPIO 14 PB12 GPIO PF0 DBG_SWCLKTCK 15 PA1 GPIO PF1 DBG_SWDIOTMS 16 PA0 GPIO PF2 DBG_SWO 17 PC11 FTM GND GND © Inter IKEA Systems B.V. 2016 Connected to main ground Hardware reset Page 6 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 1.3 Revision: 0.1 Revision date: 2017-04-24 Radio front-end and crystal The ICC-A-1 radio chipset has a built-in balun. The radio output is connected to an antenna using a wave guide type of trace to minimize losses because of the two-layer structure of the PCB. The front-end has a discrete RF-filter to comply with harmonic emission regulations. The radio uses an XO with integrated frequency control via built-in thermistor to cover the wide temperature range. If a stable slow clock source is needed, oscillators can be calibrated in runtime instead of using a dedicated 32 kHz clock. 1.4 Type approval markings The ICC-A-1 module has a FCC ID and Industry Canada (IC) number silkscreen printing for reference located at the bottom. The host shall be labelled with Contains Transmitter Module FCC ID: XXX and IC: XXX • ICC-A-1 • FCC ID: FHO-ICC-A-1 • IC:10912-ICCA1 Figure 3 - Silkscreen printing © Inter IKEA Systems B.V. 2016 Page 7 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 1.5 Revision: 0.1 Revision date: 2017-04-24 Module physical size and footprint • Total width: 18 mm x 24.5 mm • Height, including PCB and shield can: 2.1 mm Figure 4 - Physical dimensions of the ICC-A-1 module 1.6 Mounting options There are two mounting options for the ICC-A-1 module: • Wave solder the 6 pin connector to the right in a 90° angle to the carrier board. See Figure 9 - Mounted 90 degree angle. • Use standard surface mounting techniques for the board when soldered flat to a PCB. Follow the GND clearance guidelines on the carrier board. See Figure 10 Flat board-to-board connection. © Inter IKEA Systems B.V. 2016 Page 8 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 Design rules for antenna integration The ICC-A-1 module is designed for easy integration into various IKEA TRÅDFRI products. It is mandatory to follow the described antenna integration design rules to ensure acceptable and correct radiated performance. Deviation from the antenna integration guidelines should be review both from a product perspective but also from a regulatory point of view. The antenna gain is -3.6 dBi. Antenna area (free from copper) Antenna PCB Component area Figure 5 - Antenna area front and back of module © Inter IKEA Systems B.V. 2016 Page 9 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 2.1 Revision: 0.1 Revision date: 2017-04-24 Distance to metal objects Place large metal objects above the indicated surface as shown in Figure 6 and at least 30 mm from the antenna to secure antenna performance. Figure 6 - Metal free area to secure antenna performance 2.2 Distance to plastic objects Place large plastic objects at least 10 mm from the antenna. This can affect the resonance frequency. © Inter IKEA Systems B.V. 2016 Page 10 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 2.3 Revision: 0.1 Revision date: 2017-04-24 Grounding of metal heat sink When using opening A in the solder mask of the Poly PCB as shown in Figure 7, the antenna connection shall be as short and close to antenna feed as possible. Figure 7 - Suggested grounding point If integrated in LED bulbs, when inserted into an opening the module PCB shall be grounded to the heatsink plate as shown in Figure 8. © Inter IKEA Systems B.V. 2016 Page 11 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 Grounding point for heatsink Figure 8 - Grounding point for heatsink 2.4 Module mounting options If the ICC-A-1 module needs to be attached to another PCB during the integration process, the connections shall be solid and stable to prevent unwanted effects on the antenna performance. See Figure 10 and Figure 10 for possible attachment methods of the ICC-A-1 PCB to carrier board. Soldered © Inter IKEA Systems B.V. 2016 Page 12 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 Figure 9 - Mounted 90 degree angle Soldered Figure 10 - Flat board-to-board connection 2.4.1 Noisy signals Keep potentially noisy traces and components of the motherboard as far as possible from the antenna to prevent dispense of the module. Power supply for ICC-A-1 3.1 Regulated power supply ICC-A-1 can be supplied from a regulated power supply down to 2.1 V in all conditions. During peak load transients, power supply can be up to 100mA when using high power mode. The product designer shall verify unconditional stability during peak load to secure that voltage is not dropping below 2.1V. The actual design of the regulator affects the decoupling capacity. Make sure that no noise is injected via the power supply that can impact the analogue parts of the radio. 3.2 Coin cell battery operation ICC-A-1 can be operated from a single 3.0V coin cell battery. A minimum of sustaining 2.1V during all peak transients until battery end of life is required to guarantee proper operation. Make sure to fulfil the below requirements: • Add enough decoupling to the device to avoid brown out during transient load in TX burst. 20uF < 200uF. © Inter IKEA Systems B.V. 2016 Page 13 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 • Limit output power to minimize peak power load. • Schedule power consuming tasks to prevent tasks running parallel to minimize peak load. • Minimize over the air communication (OTA), time to perform tasks (like pairing), fast poll, etc. • Do not power the module via DCDC or other sources that have poor efficiency at light loads. © Inter IKEA Systems B.V. 2016 Page 14 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Electrical specifications 4.1 Absolute maximum ratings Parameter Condition Revision: 0.1 Revision date: 2017-04-24 Min Max -40 125 Unit ⁰C Ambient temperature range -50 150 ⁰C Storage temperature VDDMAX External voltage supply 3.351 VDIGPIN Voltage on any GPIO pin except pin 2 and pin 3 -0.3 VDD + 2 VLFXOPIN Voltage on pin 2 and pin 3 -0.3 VDD + 0.3 IIOMAX Current sink per I/O pin 50 mA 4.2 Recommended operating conditions Parameter Operating supply voltage Condition VREGVDD Min 2.1 Typ 3.31 Max 3.35 Unit Parameter VESDHBM Condition ESD HBM model Min Typ Max Unit kV VESDCDM ESD CDM model 500 4.3 Environmental Products using this module either uses battery with nominal voltage of 3.0V, or a regulated power at 3.3V or lower. © Inter IKEA Systems B.V. 2016 Page 15 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 4.4 Revision: 0.1 Revision date: 2017-04-24 Transceiver characteristics Parameter Maximum TX power, 802.15.4 DSSS-QPSK Condition Conducted, 3.3V RX Sensitivity 1% PER Conducted, 20 octets FOFF Input frequency offset tolerance 1% PER Co-channel interferer rejection 1% PER Received signal 10dB above sensitivity level -3 dB Adjacent channel rejection 5MHz Interferer +-1 channel spacing 55 dB Adjacent channel rejection 10MHz Interferer +-2 channel spacing 58 dB 4.5 Typ 12.5 Max -98 -120 Unit dBm dBm 120 ppm Wake up timing Parameter From EM2 deep sleep Condition Executing RAM or cache From EM2 deep sleep Executing from flash 4.6 Min Min Typ 2.8 Max 3.4 Unit uS 7.8 10.4 uS Typ Max VDD*0.3 Unit General purpose input/output Parameter VIOIL Condition Input low voltage VIOIH Input high voltage VIOOL Output low voltage relative to VDD VIOOH Output high voltage relative to VDD IIOLEAK Input leakage current RPU I/O pin pull-up resistor 30 40 50 kOhm RPD I/O pin pull-down resistor 30 40 50 kOhm © Inter IKEA Systems B.V. 2016 Min VDDIO*0.7 VDD*0.4 VDDIO*0.6 0.1 nA Page 16 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Regulatory instructions 5.1 Limitations Revision: 0.1 Revision date: 2017-04-24 ICC-A-1 shall only be installed in limb-worn devices and only be used as described in this document and cannot be co-located with other antennas or transmitters, exceptionally if specified in the grant condition of the equipment authorization. Other electronic functions not associated with the certified module or certified transmitter requires additional equipment authorization. A host product itself is required to comply with all other applicable FCC equipment authorization regulations, requirements, and equipment functions that are not associated with the transmitter module portion. To ensure compliance for all non-transmitter functions, a host product manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. ICC-A-1 fulfils the RF exposure requirements as portable limb-worn device and as mobile device, with a separation distance equal to or more than 20 cm between product and users body in normal operation. ICC-A-1 must only be installed in portable limb-worn devices (not body worn) or in mobile devices with a separation distance equal to or more than 20 cm from users body under normal operations. If ICC-A-1 is installed in a mobile device (host), a special text needs to be added in the host user manual. This text needs to include information regarding the separation distance and advise the end user that it is not allowed to be closer than 20 cm from the device during normal operation. The text needs to be in both English and French language. 5.2 User manual User manual for license-exempt radio using the ICC-A-1 module needs to contain ICC-A1 regulatory information. 5.3 Label The label for license-exempt radio using the ICC-A-1 module shall be printed separately and needs to contain the FCC ID/ISED certification number clearly visible on the product. © Inter IKEA Systems B.V. 2016 Page 17 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 Certification The ICC-A-1 module is certified with FCC ID: FHO-ICC-A-1 and Industry Canada IC: 10912A-ICCA1. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For more information, go to: http://www.ecfr.gov/cgi-bin/textidx?SID=a1be5f56bcd8d1391a26085ba51c6478&mc=true&node=se47.1.15_121&rgn=d iv8.http://www.ecfr.gov/cgi-bin/textidx?SID=a1be5f56bcd8d1391a26085ba51c6478&mc=true&node=se47.1.15_121&rgn=d iv8 6.1 FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: © Inter IKEA Systems B.V. 2016 Page 18 of 19 Document name: ICC-A-1 connectivity module description Document ID: SCDOC-129-680 FCC ID: FHO-ICC-A-1 IC ID: 10912A-ICCA1 Revision: 0.1 Revision date: 2017-04-24 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • 6.2 Consult the dealer or an experienced radio/TV technician for help. Industry Canada statement This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. (3) Changes or modification not expressly approved by the partly responsible for compliance could void the user’s authority to operate the equipment. 6.2.1 Avis d’industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et, (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. (3) Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler le droit de l'utilisateur à utiliser l'équipement. © Inter IKEA Systems B.V. 2016 Page 19 of 19
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2017:06:21 10:37:07+08:00 Modify Date : 2017:06:21 10:37:07+08:00 Author : hwng Subject : Page Count : 19 Page Layout : SinglePage Page Mode : UseNone XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:04767a1e-5886-11e7-0000-49cdad03c4b7 Producer : PDFCreator 2.0.1.0 Keywords : Creator Tool : PDFCreator 2.0.1.0 Document ID : uuid:04767a1e-5886-11e7-0000-49cdad03c4b7 Format : application/pdf Title : 10. ICC-A-1_Module_Description_IKEA_0 9 Creator : hwng Description :EXIF Metadata provided by EXIF.tools