INOVA Geophysical Equipment FSU3 FSU-3 User Manual Field Operationsfcc
INOVA Geophysical Equipment Limited FSU-3 Field Operationsfcc
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1686441 |
| Application ID | clUdhPdsQCKmLiUHatixpw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 126.98kB (1587209 bits) |
| Date Submitted | 2012-04-30 00:00:00 |
| Date Available | 2012-04-30 00:00:00 |
| Creation Date | 2012-04-12 08:54:17 |
| Producing Software | Acrobat Distiller 10.1.2 (Windows) |
| Document Lastmod | 2012-04-24 17:00:09 |
| Document Title | Field Operationsfcc.book |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | efrensle |
® FireFly DR31 Field Operations Quick Reference Guide for FCC Use Release 3.0 100-500nn Rev. A November 2011 INOVA Geophysical Equipment Limited 12200 Parc Crest Drive Stafford, Texas 77477 USA P: +1.281.552.3800 F: +1.281.552.3811 www.inovageo.com Copyright © 2010 INOVA Geophysical Equipment Limited. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any format or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without prior written permission of INOVA Geophysical Equipment Limited. Copyright violators also may be subject to civil penalties. INOVA Geophysical makes no warranties as to the accuracy, validity, or fitness for use or application of the contents of this document. INOVA reserves the right to revise the information in this document at any time without notice. Although an attempt has been made to ensure the accuracy of the following material, no responsibility is assumed by ION for any use, or for any consequences resulting from any use, of the information contained herein. No guarantee of suitability for any purpose is offered or implied. FireFly® is a registered trademark of INOVA Geophysical Equipment Limited; SCORPION® is a registered trademark of INOVA Geophysical Equipment Limited. INOVA has attempted, throughout this document, to distinguish proprietary trademarks from descriptive terms by following the capitalization style used by the manufacturer. All brand names and product names used in this document are trade names, service marks, trademarks, or registered trademarks of their respective owners. Print date: November 2011 Original publication date: November, 2011 Part Number: 100-500nn Contents NavTool Start Up..............................................................................................................................................................................7 NavTool Point Selection...................................................................................................................................................................8 NavTool Map....................................................................................................................................................................................9 Receiver Station Equipment ...........................................................................................................................................................11 Task – Layout/Deployment (SVSM)..............................................................................................................................................12 Task – Layout/Deployment (GDU/Geophone String)....................................................................................................................13 Task – Battery Swap .......................................................................................................................................................................14 Task – Pickup..................................................................................................................................................................................15 Task – QC .......................................................................................................................................................................................16 Task – Troubleshoot .......................................................................................................................................................................17 Task – Shooting ..............................................................................................................................................................................18 Task – Wireline Sims......................................................................................................................................................................20 Task – Drilling ................................................................................................................................................................................22 FireFly Field Operations Quick Reference Guide FireFly Field Operations Quick Reference Guide This device complies with Part 15 of the FCC and RSS210 Issue 8 rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Health Canada's Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada's requirement. Information can be obtained at http://www.hc-sc.gc.ca/ewhsem/pubs/radiation/radio_guide-lignes_direct-eng.php Français Cet appareil est conforme à FCC Partie15 de Industrie Canada RSS210 numero 8 standard exempts de licence(s). Son utilisation est soumise à Les deux conditions suivantes: (1) cet appareil ne peut pas provoquer d 'interférences e (2) cet appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. Per Industry Canada RSS rules: Cet appareil est conforme avec Santé Canada Code de sécurité 6. Le programme d 'installation de cet appareil doit s' assurer que les rayonnements RF n'est pas émis au-delà de I'exigence de Santé Canada. Les informations peuvent être obtenues: http://www.hc-sc.gc.ca/ewhsemt/pubs/radiation/radio_ guide-lignes_direct-eng.php Warning RF Exposure Compliance The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 120 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Industry Canada Statement: This device has been designated to operate with the antennas listed below, and having a maximum gain of 5.2 dB. Antennas not included in this list or having a gain greater than 5.2 dB are strictly prohibited for use with the device. The required antenna impedance is 50 Ohms. Antenna Part Number Format: YK150-W135 Français Conformité des appareils Warning RF L'antenne (s) utilisée pour ce transmetteur doit être installé pour fournir une distance de séparation d'au moins 120 cm de toutes les personnes et ne doit pas être co-localisés ou fonctionner en conjonction avec une autre antenne ou transmetteur. Les utilisateurs et les installateurs doivent être fournis avec des instructions d'installation d'antennes et conditions opératoires du transmetteur pour satisfaire la conformité d'exposition aux RF. Industrie Canada (CNR-110 Numéro 9 Juin 2007 Section 7.1.5) Ce dispositif a été désigné pour fonctionner avec les antennes énumérées ci-dessous, et d'avoir un gain maximum de 5,2 dB. Antennes pas inclus dans cette liste ou ayant un gain supérieur à 5,2 dB sont strictement interdites pour l'utilisation avec cet appareil. L'impédance d'antenne requise est de 10 ohms. Format antenne Référence: YK150-W135 FireFly Field Operations Quick Reference Guide FireFly Field Operations Quick Reference Guide NavTool Start Up 1. Turn on NavTool and click Start NavTool. 2. Select Language, Crew and Operator, and Continue. 3. If messages appear, read and tap OK. 4. Tap Close to show map. FireFly Field Operations Quick Reference Guide FireFly Field Operations Quick Reference Guide NavTool Point Selection 1. From the main Menu select Points. 2. Tap to add points. 3. Tap Line to display the list of lines. 4. Select the Line to choose points from. 5. Select the points to add then tap • All for all points on a given line • Range for a range of points (select the first and last point to add all points in the range • Single Point NavTool Map The Map/Navigation screen shows you the direction and distance to your next task. It also shows hazards/exclusions, nearby roads and buildings, etc. FireFly Field Operations Quick Reference Guide • Zoom in and out by tapping + and -. • Pan the map by dragging your finger across the screen. • Reset the map view by tapping the center of the screen. FireFly Field Operations Quick Reference Guide 10 No Permit The NavTool allows you to override a point that is currently set as No-Permit. 1. A No Permit point is displayed in the Points list with a Padlock. 2. Add either a range of No-Permit points (override the NoPermit setting) or a single point: • To add a range of points, select the first and last point in the range (the selection will turn black). • To add a single point, select the desired point from the list. 3. Tap to override the point setting. Receiver Station Equipment SVSM Station GDU Station From Left to Right: From Left to Right: SVSM FSU w/Antenna Battery GDU (connected to String) FSU w/Antenna Battery FireFly Field Operations Quick Reference Guide 11 FireFly Field Operations Quick Reference Guide 12 Task – Layout/Deployment (SVSM) 1. Locate Station using NavTool map. 4. Place Pole on Sensor. 2. Auger hole and Plant SVSM. 5. (NavTool)Tap Layout, then Fix, then Connect FSU, then 3. Connect Equipment in this order: a. b. c. Sensor (SVSM) Antenna Power (Battery) Transmit. 6. (NavTool) Tap Next Point. Task – Layout/Deployment (GDU/Geophone String) 1. Locate Station using NavTool map. 2. Plant geophone array. 3. Connect Equipment in this order: a. b. c. 4. (NavTool)Tap Layout, then Fix, then Connect FSU, then Transmit. 5. (NavTool) Tap Next Point. Sensor (Geophone String to GDU and GDU to FSU) Antenna Power (Battery) FireFly Field Operations Quick Reference Guide 13 FireFly Field Operations Quick Reference Guide 14 Task – Battery Swap A Battery Swap is done with a Troubleshoot task. 1. Locate Station using NavTool map. 2. (NavTool) Tap Troubleshoot. 3. (NavTool) Tap Battery. 4. Unplug Old battery. 5. Plug in New battery. 6. (NavTool) Tap Next Point. Task – Pickup 1. Locate Station using NavTool map c. No FSU? - Tap No FSU. 2. (NavTool) Tap Pickup. 4. Disconnect Equipment in this order: 3. (NavTool) Confirm FSU ID: a. Power (Battery) b. A ntenna c. Sensor (GDU then Geophone String, or SVSM) 5. (NavTool) Tap Next Point. a. Match? - Tap FSU ID. b. No Match? - Tap Other FSU, and enter ID of FSU picked up. FireFly Field Operations Quick Reference Guide 15 FireFly Field Operations Quick Reference Guide 16 Task – QC 1. Locate Station using NavTool map. 6. (NavTool) Choose Download Type. 2. Magnet Swipe FSU a. Latest - Enter number of shots to download. b. Shot ID - Enter First and Last shot IDs to download. 7. (NavTool) Tap Start Download. 8. (NavTool) When download completes, tap Next Point. 3. (NavTool) Tap QC then Connect FSU. 4. (NavTool) Select FSU. 5. (NavTool) Put Records where…? a. Tap Internal to save to device. b. Tap External to save to SD Card. Task – Troubleshoot 1. Locate Station using NavTool map. 2. (NavTool) Tap Troubleshoot. 3. (NavTool) Select Equipment that was troubleshot or swapped. a. FSU b. Battery c. Sensor (SVSM or GDU & Geophone string) FireFly Field Operations Quick Reference Guide d. Antenna (Aerial) 4. Pickup? – If picking up all equipment tap Pickup to perform Pickup task. 5. Redeploy? – If redeploy is required (indicated by !! ) tap Redeploy to perform Layout task. 6. Tap Next Point. 17 FireFly Field Operations Quick Reference Guide 18 Task – Shooting 1. Locate Station using NavTool map. 7. (NavTool) Wait for the following screens: 2. (NavTool) Tap Shoot then Fix above shothole. • In Queue • Prepare to Arm • Arm ShotPro 8. (ShotPro)Press Charge and Arm buttons together to arm, and wait for the Fire Command. 9. (NavTool) Select Shot Status: • Good Shot • Blowout • Misfire 10. (NavTool) If a Misfire, select to Try Again or Abort. 11. (NavTool) Tap Next Point. 3. Connect Firing line to cap lead. 4. Plant Uphole phone. 5. Back Off to safe distance. 6. (Shot Pro) Arm Shot Pro - press to arm the pack. on the Shot Pro, then FireFly Field Operations Quick Reference Guide 19 FireFly Field Operations Quick Reference Guide 20 Task – Wireline Sims 1. For Each Sim to be recorded (all traces on all vibes to be tested): a. Connect FSU to GDU. b. Connect GDU to Truck Wireline cabling. 2. (NavTool) Tap Menu then Wireline Sims. 3. (NavTool) Deploy FSUs. For each FSU: a. Tap Deploy and Select Vehicle. b. Select Trace Type (Ground Force, Reference, etc.). c. Follow Normal GDU Layout workflow (page 13). 4. Contact Observer to Run Sim(s). 5. (NavTool) QC FSUs. For each FSU: a. Tap QC. b. Follow Normal QC workflow (page 16). 6. (NavTool) Tap Close. FireFly Field Operations Quick Reference Guide 21 FireFly Field Operations Quick Reference Guide 22 Task – Drilling 1. Locate Station using NavTool map. 6. Tap Close to finish ShotLog entry. 2. Drill shothole. 7. Tap Done. 3. (NavTool) Tap Drill then Fix above shothole. 8. Review Drill Log. 4. (NavTool) Tap Data Entry. 9. Tap OK. 5. Check and edit each Shot Log value and tap >> www.inovageo.com 12200 Parc Crest Drive Tel + 1 281 552 3800 Stafford, TX 77477 USA Fax + 1 281 552 3811
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : efrensle Create Date : 2012:04:12 08:54:17Z Modify Date : 2012:04:24 17:00:09-05:00 Has XFA : No Language : en XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Field Operationsfcc.book Creator : efrensle Creator Tool : FrameMaker 10.0.2 Metadata Date : 2012:04:24 17:00:09-05:00 Producer : Acrobat Distiller 10.1.2 (Windows) Document ID : uuid:18aecb82-4c91-4381-8fcc-65206408afdb Instance ID : uuid:14908781-07fb-43c1-b5a9-2fe17cc42b2b Page Mode : UseOutlines Page Count : 24EXIF Metadata provided by EXIF.tools