INSUNG Electronics HS920 Bluetooth Headset User Manual
INSUNG Electronics Co., Ltd. Bluetooth Headset Users Manual
Users Manual
Bluetooth Headset – HS920
- 1 -
Bluetooth Headset
USER’S MANUAL
INSUNG ELECTRONICS Co., Ltd.
Bluetooth Headset – HS920
- 2 -
1. INTRODUCTION
Bluetooth Headset (HS920) is a wireless headset using Bluetooth technology.
Bluetooth Headset (HS920) provides audio connectivity to other Bluetooth
devices such as mobile phones, PDAs, and PCs. This is compatible with any
Bluetooth Audio gateway.
Before using, read this manual.
Controls & Functions
① ON/OFF : Power on/off
② Down : Decrease volume
③ Up : Increase volume
④ Talk : Starting & ending a call
⑤ Indicator : indicate every operation condition
⑥ Speaker :
⑦ Microphone :
⑧ Ear hook : Ear hook can switch from left to right & vice versa. To
switch, separate ear hook from body and insert it to opposite direction.
Components List
Headset
AC/DC Adapter
User Manual
⑧Ear hook
⑦Microphone
⑥Speaker
②
Down
③Up
④Talk
①ON/OFF
⑤Indicator
Bluetooth Headset – HS920
- 3 -
2. Operation
1. Pairing the Headset
Before the Headset communicate, it must be paired to the companion device
it will be used with, such as a mobile phone. This is to ensure the Headset
only communicates with the device chosen by the user and not any other
Bluetooth devices in range. Pairing is needed only once when first operation
and changing devices such as Headset, mobile phone, or audio gateway.
Paring : The condition that communication can be made between Headset
and other devices such as Headset, mobile phone, or audio gateway
Before pairing, reset Headset firstly.
Step1. Press and hold the ‘ON/OFF’ button for 3 seconds. With a sound, Green
LED flashes 5 times and continuously press for 4 seconds until Red and Green
LED flashing.
Step2. For 60 seconds, Headset searches Bluetooth device for pairing
Now pair Headset with mobile phone.
Step3. Find Bluetooth device at mobile phone
Step4. Add Headset to your mobile phone list
Log in 0000 as secrete number
* Use mobile phone’s manual for mobile phone pairing
②
Down
③Up
④Talk
①ON/OFF
⑤Indicator
Bluetooth Headset – HS920
- 4 -
2. Making Calls
Pressing TALK button, you can make a call.
Step1. Headset must be ‘ Power ON’ condition after headset is paired with other
Bluetooth device.
* Refer to a previous page for detail information of pairing
* ‘Power ON’ condition : Green LED blinking every 3 second.
Step2. To make a call, put the number you want to call in mobile phone and
press TALK button in headset. If you just press TALK button in headset,
you will be connected to last calling.
Step3. After finishing a call, pressing TALK button will end a call.
3. Answering Calls
Pressing TALK button, then you can receive a call.
Step1. Headset must be ‘Power ON’ condition after headset is paired with other
Bluetooth device.
* Refer to a previous page for detail information of pairing
* ‘Power ON’ condition : Green LED blinking every 3 second.
Step2. If a phone is ringing, press TALK button once. After hearing connecting
sound, you can talk using headset.
Step3. After finishing a call, pressing TALK button will end a call.
Bluetooth Headset – HS920
- 5 -
4. Adjusting the Volume
During a call, volume can be adjusted by UP, DOWN button.
Up : Increase volume.
Down : Decrease volume
3. When use by Hands-Free
Bluetooth Headset(HS920) provides Hands-Free Profile when Bluetooth mobile
phone is connected to Hands-Free. How to do pairing is same with Headset.
Operation Property when connected with Hands-Free
Talk ON/OFF UP + Down
Current
situation
Short Press Long Press Short Press Long Press Short Press Long Press
OFF - - - Power On - -
On
Standby
Initiate
voice dial
Redial
recent
number
- Power Off Adjust
volume step
by step
Adjust
volume
continuously
On
adjusting
voice dial
Cancel
voice dial
Power Off
Ringing Answering Cancel
a call
Power Off - -
On Calling
with headset
Ending a
call
Connecting
with a
phone
Mute Power Off Adjust
volume
continuously
Adjust
volume
continuously
When other
call is on
standby
Ending a
call
Connecting
with a
phone
Connecting
to standby
call
Power Off Adjust
volume
continuously
Adjust
volume
continuously
Bluetooth Headset – HS920
- 6 -
4. Charging
Bluetooth Headset(HS920) has Li-Polymer battery inside.
Full charging gives 240 hours standby or maximum 7 hours of continuous
talking condition.
Before using headset at first time, charge a battery fully.
Charging time is about 2 hours from discharged to fully charged.
◈ For the state-of-the-art Li-Polymer battery of Bluetooth Headset (HS – 920),
battery’s life is not affected by charging a battery from not fully discharged.
Step1. Connect AC/DC adapter to DC jack of Headset
Step2. At indicator of Headset, red light is on
Step3. Charging is completed when red LED is off
Battery using time
Battery charging time & Indication condition
Standby Continuous talking
Headset(HS-920) 240Hours Maximum 7hours
Chaarging time Indicator condition
Headset(HS-920) 2hours On charging : red
After charging : light off
Bluetooth Headset – HS920
- 7 -
5. Troubleshooting
Refer to following indication when abnormal situation occurs
1. Can not do pairing
☞ reset Headset and do pairing again.
2. Sound is too loud or too small.
☞ After connecting, ensure a mobile phone’s volume and use UP/DOWN
button for proper volume.
3. Pressing TALK button don’t make a call.
☞ Check discharge and pairing.
▲ CAUTION ▲
◈ Do not make unapproved separation or changes. This may be dangerous.
Our company does not take responsibility of A/S for unapproved separation
or changes.
◈ Do not put Headset near fire.
◈ Do not separate or turn a Headset Ear Hook with excessive force. It ma
y
destroy Headset Ear Hook
◈ Strong impact or dropping of Headset can make it out of order or it’s life
short
◈ In case of reusing after no use for long time, it can be better to use after
charging fully
◈ When no use, turn Headset off
Bluetooth Headset – HS920
- 8 -
INSUNG ELECTRONICS Co., Ltd.
421, WONCHON-DONG, YOUNGTONG-GU,
SUWON-CITY, KYUNGKI-Do, KOREA, 442-823
TEL: 82-31-273-1416~7, FAX: 82-31-273-1418
FCC ID: SE4HS920
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions; (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.