IPAN IPAN IPN-TXFC Wireless Charger User Manual

IPAN IPAN Wireless Charger

User Manual

ENGLISH  Charger description:    Product name: Wireless Charger   Model No.: IPN-TXFC   Wireless charger compatible with the WPC Qi standard    "Fast charging " mode only compatible with mobile devices that support fast charging up to a maximum of 10W   Temperature, power output and surge control for greater safety.   LED power light.   QC 3.0 electrical adapter.  Instructions:  ●  Connect the charger cable to a QC 3.0 or QC 2.0 electrical adapter (not supplied), and plug it into a wall socket. ●  Ensure that the device to be charged has cordless charging turned on. Place the device to be charged on top of the charger. The device must be placed at the exact center of the surface to enable the charger to work as effectively as possible.  Power light:  1. When turned on: the LED lights up for three seconds before turning off again. 2. In charging mode: the LED lights up for ten seconds before turning off again. 3. In error mode: the LED flashes   Important information:  •It is completely normal for devices to become warm when charging; they will gradually cool down once they are fully charged.   •Charging times may vary depending on the device's battery capacity, the level of charge, the age of the battery, and the ambient temperature.  •Storage temperature range: -20°C à 25°C. •Operational temperature range: 0°C à 40°C.  WARNING:  Ensure that there are no metal pieces or components between the charger and the device when charging. Only use the charger in a dry place. Never place the charger into water. Clean with a dry cloth. Never open the unit. Maintain an adequate distance from sources of heat. Keep out of reach of children.   The 'Qi' logo is a registered trademark of the Wireless Power Consortium Old electronic devices are recyclable materials. They must not be disposed of in household waste. Once a device has reached the end of its life, it must be recycled in accordance with local environmental regulations governing waste disposal.
 Manufacturer: www.ipanipan.com  This device complies with part 15 of the FCC Rules.  Operation is subject to the following two conditions:  (1) This device may not cause harmful interference, and  (2) this device must accept any interference received, including interference that may cause undesired operation.   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help.  Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.  FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled  environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  IPAN IPAN declares that the radio equipment type IPN-TXFC is in complaince with Directive 2014/53/EU.  Manufacturer by: Company: Shenzhen Qianhai Headfree Technology Co., Ltd. Address: East Side of 5th Floor, 1st Bldg., Jinyuda Industrial Park, Shangliao Community, Shajing, Bao’an, Shenzhen, China.        Imported by: Company: IPAN IPAN Address: 218/228 avenue du Haut Leveque, batiment 5, PESSAC, France

Navigation menu