IPEVO CSW2-02IP-A1 Wireless Interactive Whiteboard System - IW2-Wireless Receiver User Manual CSW2 02IP A1 UserMan
IPEVO corp. Wireless Interactive Whiteboard System - IW2-Wireless Receiver CSW2 02IP A1 UserMan
IPEVO >
(CSW2-02IP-A1) UserMan
User Manual
for IW2 Wireless Interactive Whiteboard System
Download and install IPEVO IW2 software at
support.ipevo.com/IW2
Table of Contents
Package Contents.......................................................................1
The Basics................................................................................1
Two Ways to Use IW2................................................................2
How IW2 Works.........................................................................3
Getting to Know IW2.............................................................4-5
Installing IW2.................................................................... 6-15
Step 1: Driver & Software Installation..................................6
Step 2: Positioning the Sensor Cam..................................7-8
Step 3: Securing the Sensor Cam...................................8-10
Step 4: Readying the Interactive Pen..................................11
Step 5: Connecting to the Computer...............................11-12
Step 6: Calibration........................................................ 13-15
Using IW2 Interactive Pen...................................................16-21
Using the Interactive Pen as a Mouse.............................16-17
Using the Interactive Pen as a Whiteboard
Marker with IPEVO Annotator........................................18-22
FAQ..................................................................................23-24
Troubleshooting......................................................................25
Product Specifications........................................................26-27
Federal Communication Commission Interference Statement...27
1
Package Contents
The Basics
Congratulations on your purchase of the IW2 Wireless Interactive
Whiteboard System. After a few simple steps, your system will be
calibrated and ready to use.
Your package should contain the following:
The IPEVO Wireless Interactive Whiteboard System, or IW2, turns your
large projection screen into an interactive touchscreen, giving you
the ability to easily draw and annotate for education and business.
Plus, because IW2 is compatible with many different kinds of soft-
ware, you’ll also be able to control your computer (and what’s on the
screen) at a distance. And this is all possible no matter what make and
model of projector you have.
User
Manual
2 AAA
Batteries
3.6 m Micro-USB
Cable
Replaceable Pen Cap
Wireless
Receiver
IW2 Interactive Pen
Ceiling Mount
(With Adhesive Sticker)
Tripod Mount
(With Tripod Socket)
IW2 Sensor Cam
Note: The Interactive Pen tip may be disassembled for maintenance purposes. Otherwise,
please do not loosen or disassemble the tip.
Wrist Strap
Power Adapter Plug Adapter
(Included for UK and Europe)
2
Use the Interactive Pen as a Computer Cursor
The Interactive Pen can behave like a mouse, transforming any surface
into a touchscreen. Use the Pen to intuitively perform the actions you’d
normally use your mouse to perform.
Note: The Interactive Pen can perform normal mouse actions including click, double click,
and drag. However, some actions are not executable with the Pen, such as hovering.
Annotate Your Text and Images
Using the free screen annotation software IPEVO Annotator, you can
draw and write directly on your interactive whiteboard. You can even
draw on top of your document camera’s live video feed. Engage your
audience and clarify your material.
Two Ways to Use IW2
3
IW2 is made up of three devices: the Interactive Pen, the Sensor Cam,
and the Wireless Receiver (attached at the bottom of the Interactive
Pen). The Interactive Pen emits infrared signals on contact or by
pressing the IPEVO button on the Pen, the Sensor Cam, which acts as
the “eye” of IW2, then reads the infrared signals emitted and detects
the physical location of the Pen. As the Sensor Cam works in the same
way as how our eyes work, it is necessary to ensure any tappings
or movements made with the Interactive Pen could be “seen” and
detected by the Sensor Cam. Thus, please keep a clear path between
the Sensor Cam and the Pen, otherwise, these actions would not be
detected.
After detecting the physical location of the Pen, the Sensor Cam sends
this information wirelessly via the paired Wireless Receiver (which
must be plugged into the computer’s USB port) to your computer,
which then translates the Pen’s motion into cursor motion. Thus,
wherever you move the Pen, the computer will also move its cursor
in real time, just like a wireless mouse. You can also perform mouse
clicks and drags with the Interactive Pen.
How IW2 Works
Emits infrared signals on
contact or by pressing the
green button.
Receives infrared signals
from Sensor Cam and
translates Interactive Pen’s
motion into cursor motion.
Reads infrared
signals and sends
them wirelessly
to the Wireless
Receiver.
INTERACTIVE PEN
WIRELESS RECEIVER
SENSOR CAM
VGA / HDMI
cable
Power Adapter
4
Getting to Know IW2
LED Indicator
Lights up when powered up and connected. Different colors
(solid and blinking) indicate various states.
Sensor Power Button
Press once to turn on Sensor Cam and enter Active Mode.
Press once again to enter Sleep Mode. To completely
power off the Sensor Cam, please unplug the power
adapter from the outlet.
Lens
Detects signals emitted by the Interactive Pen.
Hinged Metal Base
Allows adjustment of the angle
of the Lens.
Micro-USB Port
Connect Micro-USB cable here.
Note: To power the Sensor Cam, connect the other end of the Micro-
USB cable to the power adapter and plug the adapter into an outlet.
Pairing Button
Press for 3 seconds to enter Pairing Mode.
Note: By default, no pairing action is required – the Sensor Cam
and Wireless Receiver you received are already paired. Just plug the
Wireless Receiver into your computer's USB port to start using IW2.
However, if you are using a replacement Wireless Receiver or Sensor
Cam, you need to pair them before use. To pair them, please follow
the steps on Page 22.
Green
Color States
The Sensor Cam is powered on and connected
with the Wireless Receiver.
The Sensor Cam is not connected with the
Wireless Receiver. Check that the Wireless
Receiver is plugged into your computer and is
placed within 16 ft (5m) of the Sensor Cam.
Blinking
Orange
Red The Sensor Cam is in Sleep Mode.
5
Contact Sensitive Tip
Send signals for left, right,
and double mouse clicks.
Brief contact performs a
left click while pressing in
and holding for 2 seconds
or longer performs a right
click.
IPEVO Button
This is another way to per-
form mouse clicks. Press
for a left click, or press
and hold for 2 seconds or
longer for a right click.
Wrist Strap Attachment
Holes
Attach the included wrist
strap here.
Wireless Receiver
Detach this from the Interac-
tive Pen and plug it into
your computer for a wireless
connection between your
computer and the Sensor
Cam.
Battery Cover
Open to reveal slots for 2
AAA batteries.
Power Switch
Turn the Interactive Pen on
and off.
Sensor Power Button
Remotely turn your Sensor
Cam on or off. Press once
for the Sensor Cam to enter
Active Mode. Press once
again to enter Sleep Mode.
6
Installing IW2
1. Driver & Software Installation
IW2 requires IPEVO IW Driver to function. IW2 also comes with a free
screen annotation software IPEVO Annotator. You can choose to install
and use the IPEVO Annotator with your IW2.
There is no included CD-ROM for IW Driver or IPEVO Annotator in this
package. Please visit the IPEVO website to download the latest version
of IW Driver and IPEVO Annotator at:
support.ipevo.com/IW2
Note: IW2 can be used with third-party mouse-based annotation software, but we highly
recommend using it with IPEVO Annotator to fully utilize the potential of your IW2.
After downloading,
For PC:
1. Double-click the downloaded file and follow the onscreen prompts
to complete the installation for IW Driver.
2. Follow the onscreen prompts to accept or decline installation of the
Annotator software.
3. An IW Driver icon will appear at the bottom right-hand side of the
task bar after the installation is completed.
For Mac:
1. Double-click the downloaded file. Two icons, “IW Driver” and
“Annotator” will appear.
2. Drag the IW Driver icon and Annotator icon into the Application
folder to complete the installation for both, or only drag the IW
Driver icon into the Application folder to install the IW Driver.
3. Click on the IW Driver icon in the Application folder after the instal
lation is completed. An IW Driver icon will appear at the top right-
hand side of the status bar.
Note: After successful installation of IW Driver, a menu will automatically pop up. You can
close it by clicking once on the IW Driver icon. If the menu does not appear, you can start IW
Driver by navigating to:
Windows 7 and below: Start Menu -> Program files -> IPEVO -> IW Driver.
Windows 8: Start Menu -> Apps -> IPEVO -> IW Driver.
Mac: Applications-> IW Driver.
7
2. Positioning the Sensor Cam
Proper position of the Sensor Cam is important for optimum operation.
Follow these guidelines to place the Sensor Cam:
• For most projectors, a good position for the Sensor Cam will be the
same location as the projector. One exception to this is if you are us-
ing a short-throw projector. In that case, you will need to place the
Sensor Cam further away from the screen than the projector.
• Minimal distance from your screen depends on screen size. Place the
Sensor Cam according to the recommended distances in the chart
below:
Screen Size 60” 70” 80” 100”
Minimal
Distance
8 ft
(243 cm)
9 ft
(275 cm)
10 ft
(305 cm)
11 ft
(335 cm)
• The Sensor Cam should face directly at the projection screen. De-
pending on your screen’s height, you may have to adjust the Sensor
Cam’s lens to face upwards or downwards. Adjust the hinged metal
base to easily perform any such adjustments.
• The Sensor Cam is best placed opposite the center of the screen at a
straight-on angle. However, a straight-on angle is not required for
acceptable operation, and the Sensor Cam may be placed at another
angle if necessary. Please refer to the diagram on the
following page for placement zones according to accuracy quality:
8
As you can see:
• Accuracy is better when the Sensor Cam is closer to the center.
• Accuracy decreases as the angle increases.
• Larger screens require more distance between the screen and the
Sensor Cam.
Note: Please keep a clear path between the Sensor Cam and the projection screen to ensure
proper operation.
It’s important to make sure your Sensor Cam is steady and secure
before use. There are three ways to secure your Sensor Cam,
depending on your setup:
3. Securing the Sensor Cam
A. Place on a table or AV cart
Use a flat, smooth tabletop or an AV cart. Make sure nothing is
blocking the Sensor Cam’s path to the screen surface. Adjust the angle
of the Sensor Cam to face directly at the center of the screen surface.
Projection screen
90˚
Excellent
Good
Acceptable
Poor
Poor Poor
75˚
65˚
55˚
45˚
35˚
75˚
65˚
55˚
45˚
35˚
25˚
Sensor Cam
Unavailable Unavailable
Installing IW2 (cont’d)
9
B. Use an upside-down ceiling mount
The Sensor Cam can be mounted upside-down onto the ceiling or
ceiling-mounted projector. To do so:
1. Align the hole on the base of the Sensor Cam with the circular peg of
the ceiling mount and push the Sensor Cam in. You will hear a slight
click when the Sensor Cam has settled into position.
2. Before affixing the mount to the ceiling, hold the Sensor Cam in an
area just below (by a few inches) where you intend to mount the
projector. Run the Sensor Cam position Diagnosis (see Page 15) with
the Sensor Cam in this position to ensure maximum accuracy.
10
Note: The adhesive sticker of ceiling mount is extremely adhesive and should only be ap-
plied once. The Sensor Cam can be detached without removing the ceiling mount. Simply
remove the Sensor Cam from the ceiling mount.
C. Use a tripod
The Sensor Cam comes with a tripod mount. Consider mounting the
Sensor Cam onto any standard tripod.
1 2
Remove the sticker
3. Ensure the mounting surface is clean and free of grit. Remove the
adhesive sticker from the bottom of the ceiling mount, and affix the
ceiling mount firmly onto the mounting surface.
Installing IW2 (cont’d)
11
5. Connecting to the Computer
The Sensor Cam can be connected to your computer wirelessly via the
included Wireless Receiver. To do so:
1. Connect the Sensor Cam to a power outlet by plugging the Micro-
USB cable into the Micro-USB port on the Sensor Cam, then plugging
the other end of the cable into the included power adapter. Lastly,
plug the power adapter into an outlet.
Sensor Power Button
Power Adapter
Remove the battery cover from the Interactive Pen and insert 2 AAA
batteries. Replace the cover. Attach the included wrist strap into the
attachment holes. Turn on the pen when ready to use.
4. Readying the Interactive Pen
Turn on
12
Installing IW2 (cont’d)
3. Turn on the Sensor Cam by pressing the Sensor Power Button
located on the Pen. Make sure the Pen is pointing at the Sensor Cam
while doing so.
4. Check the LED indicator of the Sensor Cam. The Sensor Cam’s LED
indicator will light up Green once it is successfully connected to your
computer.
Green Light
Press the
Sensor Power Button
2. Detach the Wireless Receiver from the bottom of the Pen and plug it
into the USB port of your computer.
Note: If the LED indicator shows a blinking Orange in step 4, the Wireless Receiver
might not be properly plugged into the computer’s USB port. Please check the
Wireless Receiver. If the LED indicator shows a solid Red, the Sensor Cam is in Sleep
Mode. Please press the Sensor Power Button again to turn the Sensor Cam on.
13
6. Calibration
IW2 must be calibrated before use to ensure accurate operation. This
process only takes a couple of steps. Please make sure that the LED indi-
cator of the Sensor Cam shows a solid Green before you proceed with the
calibration process.
IW2 requires IPEVO IW Driver to function. If you have not previously
installed IW Driver, please refer to Page 6 for the downloading and
installation instructions.
To start the calibration process, follow these steps:
You can disable auto pop up of the menu and/or auto startup of IW Driver
by unchecking the respective boxes in the menu.
Run IW Driver On Startup
Run IW Driver On Startup
PC and Mac:
Click on the IW Driver icon located in the task bar or status bar. Choose
“Start Calibration” in the menu.
Note: The Interactive Pen must have batteries and be switched on for calibration and operation.
14
Installing IW2 (cont’d)
Step 2: Accuracy Check
With the Pen, tap and hold on the red dot that appears onscreen until the next
red dot appears. Four red dots will appear in total. You MUST tap all four in
order. Failing to do so may negatively impact Pen accuracy.
Calibration Steps
Step 1: Sensor Cam Coverage Detection
Tap each corner square (in any order) with the Interactive Pen and make
sure ALL the resulting dots appear inside your projection screen. However,
do note that the dots do not need to appear inside the corner squares. If the
resulting dots are not contained within the projection screen, please follow the
instructions onscreen to reposition the Sensor Cam.
15
Step 3: Calibration Completed
After the process, you will be returned to your desktop and your IW2
will be ready for use.
However, if the system detected that the Sensor Cam is poorly positioned
and that there might be inaccuracies with IW2, follow the instructions
onscreen to improve its accuracy.
Sensor Cam position Diagnosis
If you find that your pen trace is jumping (dithering), lagging, or
otherwise becoming inaccurate after a period of time, please run the
Sensor Cam position Diagnosis and reposition the Sensor Cam according
to the suggestions given.
You can start the Diagnosis by clicking on the IW Driver icon located in
the task bar or status bar and choose “Run Diagnosis”.
16
Tap the contact-sensitive Pen tip
onto the screen surface.
Press the green button.
There are two ways to use the Interactive Pen. Firstly, it can be used as
a mouse with any mouse-based software application. Secondly, when
paired with IPEVO Annotator, it can be used just like your regular
whiteboard marker (see Page 18~21).
Please do the following every time before you start using the
Interactive Pen:
1. Plug the Wireless Receiver into your computer’s USB port.
2. Turn on the Sensor Cam by pressing the Sensor Power Button located
on the Pen. Make sure the Pen is pointing at the Sensor Cam while
doing so.
3. Check that the LED indicator of the Sensor Cam shows a solid Green.
The Interactive Pen can behave like a mouse, transforming any surface
into a touchscreen when you use it with a mouse-based application. It
can be use to:
A. Control cursor movement
Control the computer’s cursor movement by using the Interactive Pen
to intuitively perform the actions you’d normally use your mouse to
perform. The mouse cursor will follow the Pen’s movement in real
time.
B. Perform left click
Tap the contact-sensitive Pen tip onto the screen surface, or press the
IPEVO button once to perform a left click.
Using IW2 Interactive Pen
Using the Interactive Pen as a Mouse
17
C. Perform right click
Press and hold the contact-sensitive Pen tip onto the screen surface, or
press and hold the IPEVO button. Hold for at least 2 seconds.
D. Perform double click
Quickly tap the contact-sensitive Pen tip onto the screen surface twice,
or press the IPEVO button twice.
E. Click and drag
Press and hold the contact-sensitive Pen tip onto the screen surface, or
press and hold the IPEVO button. While doing so, move the Interactive
Pen to the desired spot.
Bad
Good
Note: While using the Interactive Pen, please be careful not to block the Pen’s path to the
Sensor Cam with your body as it may affect Pen accuracy.
18
IPEVO Annotator is a simple and intuitive screen annotation, recording,
image capturing and editing software that comes with IW2 for free. It
can be used in combination with many other third-party software or ap-
plications. When the Interactive Pen is paired with the Annotator, you can
easily draw and annotate on images projected onto the screen just like
a regular whiteboard marker, regardless of the software or applications
running in the background.
Note: The IPEVO Annotator may not work with certain software and/or applications running in
full screen mode.
If you have not previously installed IPEVO Annotator together with the
IW Driver, or have not upgraded IPEVO Annotator to the latest version,
please visit the Annotator’s website for downloading at:
support.ipevo.com/Annotator
After installation, you can start using Annotator by clicking on the IW
Driver icon located in the task bar or status bar, and choose
“Open Annotator”.
Using the Interactive Pen as a Whiteboard
Marker with IPEVO Annotator
Using IW2 Interactive Pen (cont’d)
19
Tap to select Desktop Mode.
PEVO Annotator offers four modes – Desktop Mode (Annotator’s de-
fault mode), Drawing Mode, Whiteboard Mode and Multi-Pen Mode.
In just a tap, you can easily select any of the modes.
Tap to select Drawing Mode.
Thu 01:57
100%
Help
Window
Go
View
Edit
File
Finder
Drawing Mode
Tap and Hold
Drawing Mode
Mode selection
Tap to select Whiteboard Mode.
Tap to select Multi-Pen Mode.
20
Using IW2 Interactive Pen (cont’d)
In the Drawing Mode, you have access to a wide range of drawing
tools to annotate your onscreen material. In addition, you can tap on
the Whiteboard Mode icon to instantly turn your screen into a blank
canvas for drawing or annotating.
Allows normal control of other applications while your drawings/
annotations still appear on screen.
Select this tool to draw and annotate. Select the pulldown menu to
change color and thickness, or to apply effects.
Drawing Mode
Duplicates selected drawings and/or annotations for use on your
screen or whiteboard.
Thu 01:57
100%
Help
Window
Go
View
Edit
File
Finder
Drawing Mode
Tap and Hold
Drawing Mode
Draw basic shapes such as rectangles or ovals. Select the pulldown
menu to change color and thickness.
Erase your drawings or annotations. Select the pulldown menu to
change the size of the eraser.
Clear all drawings and annotations at once.
Measure lines and angles using the Ruler and Protractor tools
available.
21
Allows undoing and redoing of actions.
Besides, other features are also available.
Save all or part of your current screen as an image.
Display a touchscreen keyboard.
Allows viewing and managing of images taken using IPEVO
Annotator.
Allows recording of all onscreen activities.
Hide the toolbar.
Clicking the rounded corner arrow on either side of the screen will
show the toolbar again on that side.
Highlights important sections on the screen while blocking the rest to
focus the attention of your audience.
Use your connected IPEVO doc cam’s live feed as your background.
22
Using IW2 Interactive Pen (cont’d)
Desktop Mode
When in the Desktop Mode, the annotation features of Annotator is
set to hidden, thus your drawings and/or annotations will not appear
on your screen. You can then control your computer and applications
as per normal. Your drawings and/or annotations will appear on your
screen again when you switch back to the Drawing Mode.
For more guides on using IPEVO Annotator, please visit the Annota-
tor’s website at:
support.ipevo.com/Annotator
Multi-Pen Mode
In the latest version of Annotator, you’ll find the Multi-Pen Mode
where you can enjoy multi-pen functionality by choosing from two,
three or four whiteboard frames, and then invite the corresponding
number of users up to the projected whiteboard surface to work on
the respective frames simultaneously.
23
How do I quickly determine a good working distance between the
screen and the Sensor Cam?
Normally, the projector is a good location to place the Sensor Cam. If you are
using a short-throw projector, however, please refer to Page 7 for the recom-
mended Sensor Cam distance guidelines.
Can I use rechargeable AAA batteries for the Interactive Pen?
Yes. Rechargeable alkaline batteries are recommended.
Can I use IW2 with my own software instead of IPEVO Annotator?
Yes. IW2 can be used with third-party annotation software and whiteboards.
Any mouse-based software should work fine.
Can I use IW2 with a TV or monitor instead of a projector?
Yes you can, but please take note of the following while using:
1. Some TVs/monitor screens are very delicate and fragile, thus are more
prone to scratches and damages. If you choose to tap or swipe on your TV/
monitor screen using the Pen, it might damage your TV/monitor screen.
Please check with the vendor or the User Manual of your TV/monitor screen
to see whether they are safe for use.
2. We highly recommend you to use the IPEVO Button located on the Interac-
tive Pen to perform mouse actions instead of tapping or swiping on your TV/
monitor screen with the Pen.
3. If your TV/monitor is not firmly mounted, it might move once you start
tapping or swiping, throwing off the calibration. Please run the calibration
process again. See Pages 13~15.
What should I do if the cursor is not pointing correctly and/or
following the Interactive Pen correctly?
The cursor may lose accuracy if the screen resolution or screen ratio has
changed, or if the Sensor Cam has been moved. Please run the calibration
process again. See Pages 13~15.
Why is there no scrollbar in my browser or finder window in Mac
OS X when using IW2?
By default, the scrollbar is enabled only when a mouse is connected to Mac.
You can manually enable the scrollbar by going to System Preferences ->
General and set “Show scroll bars” to “Always”.
How do I pair the Sensor Cam with the Wireless Receiver?
By default, your Sensor Cam is already paired with the Wireless
Receiver that comes with it. That said, if you are using a
replacement Wireless Receiver or Sensor Cam, you need to pair them before
use. To pair your devices:
FAQ
24
FAQ (cont’d)
1. Place the Sensor Cam within 1.6 ft (50cm) of your computer.
2. Power up the Sensor Cam. The Sensor Cam LED indicator should show a
blinking Orange.
Note: Do NOT plug the Wireless Receiver into your computer’s USB port dur-
ing this step.
3. Press the Pairing Button for 3 seconds to enter Pairing Mode. The Sensor
Cam LED indicator should blink alternately between Orange and Green.
4. Plug the Wireless Receiver into your computer’s USB port. The Sensor Cam
LED indicator will blink Green three times before changing to a solid Green,
which lets you know the pairing is successful.
25
Troubleshooting
I had connected the Sensor Cam to an outlet and plugged in the Wire-
less Receiver to the Computer’s USB port. The LED indicator of the
Sensor Cam first shows a blinking Orange then changes to a solid Red,
but I am still not able to use the Interactive Pen.
The Sensor Cam is trying to detect and connect with the Wireless Receiver
when the LED indicator is blinking Orange. If the Sensor Cam has suc-
cessfully detected and is connected with the Wireless Receiver, the LED
indicator will show a solid Green, and it is now ready for use. However, if
no successful connection is made within 20 seconds, the Sensor Cam will
enter into the Sleep Mode and the LED indicator will turn Red. Check that
the Wireless Receiver has been properly plugged into the computer and
is placed within 16 ft (5m) of the Sensor Cam. Turn on the Sensor Cam by
pressing the Sensor Power Button located on the Pen. Make sure the Pen
is pointing at the Sensor Cam while doing so. The Sensor Cam will start to
detect and try to connect with the Wireless Receiver again. Check the LED
indicator, it should show a solid Green indicating a successful connection,
and is now ready for use.
When I tap on the corners during calibration, the dots don’t fall within
the projection screen.
Move the Sensor Cam closer to the area where the corresponding dots do
not appear. Or, move the Sensor Cam further away from the screen. Run the
calibration process again. See Pages 13~15.
The cursor on my screen is jumping around abnormally and I am not
able to control it.
Remove any strong light source or infrared equipment close to the Sensor
Cam, as these may interfere with the Sensor Cam.
During calibration, multiples spots appear or spots appear erratically.
1. Remove any strong light source or infrared equipment close to the Sensor
Cam, as these may interfere with the Sensor Cam.
2. Ensure the projection screen you are using is not made of highly reflective
glass or metal. Such reflective materials affect Sensor Cam’s operation.
The pen trace continually breaks when I write or draw with the
Interactive Pen.
1. The Sensor Cam might be placed too far away from the screen. Move the
Sensor Cam closer to the screen and run the calibration process again. See
Pages 13~15.
2. Pen trace can only occur if the Sensor Cam’s vision field is not blocked.
Please do not draw or write with your body blocking the Sensor Cam.
3. Replace the batteries in the Interactive Pen. Low batteries can have an
adverse effect on pen trace and accuracy.
26
Troubleshooting (cont’d)
The LED indicator of the Sensor Cam sometimes blink Orange, and the
pen trace continually breaks when I write or draw with the Interac-
tive Pen.
There might be serious interference between the wireless connection of the
Sensor Cam and the Wireless Receiver caused by nearby infrared equipment.
Try moving the positions of the Sensor Cam and/or the computer to avoid
the interference spot, or move the Sensor Cam and the computer closer to
improve their connection. Check that the LED indicator on the Sensor Cam
changes to a solid Green before continue using the Interactive Pen.
My pen trace and pointing are inaccurate after I change screen
resolution.
Changing the screen resolution throws off the calibration. Please run the
calibration process after every resolution change. See Pages 13~15.
My pen and cursor lose accuracy every now and then.
Please make sure the Sensor Cam is positioned on a flat and stable surface. A
slight tip of the Sensor Cam may result in inaccurate operation.
I have the task bar set to hidden, and I can’t use the task bar with the
Interactive Pen.
Please uncheck the auto-hide option and position the task bar on the screen
when using IW2.
27
Product Specifications
Federal Communication Commission Interference Statement
Sensor Cam
Effective Board Area: Up to 100”
Effective Distance: Up to 20 ft (600cm)
Power Supply: DC Adapter (Input Rating 5V/2A)
Dimensions L x W x H (folded): 3.78” x 1.73” x 0.85” (96 x 44 x 21.5 mm)
Weight: 3.7oz (106g)
Operation Temperature: 0~40°C
Interactive Pen
IR Trigger: Contact Sensitive Tip or Button Press
Battery Type: 2 AAA (Alkaline Battery)
Dimensions L x W x H (with Wireless Receiver): 9.06” x 0.79” x 0.91” (230 x 20
x 23mm)
Weight: (with batteries): 2.3oz (66g)
Operation Temperature: 32~104°F (0~40°C)
Wireless Receiver
Wireless Receiver is powered by USB connection (Input Rating 5V/0.5A)
Operation Temperature: 0~40°C
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
Consult the dealer or an experienced radio/ TV technician for help.
Caution: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
© 2016 IPEVO Inc. All rights reserved. IPEVO, IPEVO Annotator, IW2, the IPEVO logo,and other IPEVO marks are
owned by IPEVO Inc. and may be registered. All other trademarks are the property of their respective owners.
Customer Service (International)
Email: service@ipevo.com
Tel: +886-2-5550-8686
Customer Service (USA)
Email: cs@ipevo.com
Tel: 1 (408) 490 – 3085
For IPEVO IW2 FAQ, Software, Documents, please visit:
support.ipevo.com/IW2