Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 407576 |
| Application ID | kkyAGluZpDcY37o1ixwCKw== |
| Document Description | Users Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 250.46kB (3130712 bits) |
| Date Submitted | 2004-03-23 00:00:00 |
| Date Available | 2004-03-23 00:00:00 |
| Creation Date | 2004-03-20 11:50:26 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2004-03-20 11:51:06 |
| Document Title | Users Manual 1 |
Hardware Instruction Manual Digital Audio Player/recorder/Camera/FM Tuner Model iFP-1000 Series iFP-1000 Series Thank you for your purchase. Please read this manual carefully before using your new player. http://www.iRiver.com http://www.iRiver.com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Contents Getting started Locating the controls PC software installation Basic operation Convenient Functions Additional information This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual. Getting started Contents 1-1 Features 1-2 About power supply 1-3 Getting started Getting started Internet This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual. Internet Features URL : www.iRiver.com Find information on our company, products, and customer and technical support. Update your player with firmware downloads. Firmware upgrades offer support for new CODECS and deliver new product features. Consult the product FAQ. Register your iRiver product online so that our Customer Service is able to provide support as efficiently as possible. All contents contained in this manual subject to change without notice to improve ability of this player or according to changing of specification. iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and /or other countries and is used under license. Microsoft Windows Media and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the companies with which they are associated. 1999-2004 iRiver Limited. All rights reserved. 1-1 Multi-Codec Player Supports MP3, WMA, OGG and ASF formats. " Firmware Upgrade Provides the latest updated features via firmware upgrade. " 260,000 color graphic LTPS LCD supporting Multiple Languages(40 languages) iFP-1000 Series comes with 260,000 color graphic LTPS(Low Temperature Poly Silicon) LCD which can support multiple languages. " Digital Camera Built in camera and Color LCD screen. " FM Function You can easily listen to FM stations and set your favorite stations by using Auto Preset and Frequency Memory functions. " 6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal " Xtreme EQ and Xtreme 3D Customize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D. " GUI (Graphic User Interface) Menu System " Easy Navigation The simple navigation makes it easy to find any song. " Supports 8 levels of subfolders, 500 folders total and up to 1500 files at one time. " Create your own playlists. " Record FM Radio, or Voice Voice record level is automatically controlled by AGC function. " Convenient neck strap. " Built-in Rechargeable battery that charges directly from the USB port. Getting started Getting started 1-2 About power supply About power supply Battery detach/attach Charging by using USB cable Note To detach : Press the tab to release the battery and slide it out of the player. To attach : Slide the battery onto the player until it locks into place. The player will charge even if it is turned off. A charging indicator light will illuminate while the player is charging. The light will turn off when charging is complete. Getting started Getting started Connect the USB cable to the player and the PC. The iFP battery will begin charging. If the battery is worn out, “Low Battery” is displayed on the LCD. Note Charging by using AC adapter Connect the AC Power Adapter supplied with the player to the USB connector of the player. The AC operating voltage of this player is 100~240V, 50~60Hz. Note 1-3 The charging time : Approx. 2.5~3 hours (At full discharge) Charge and store the battery at room temperature. It may not charge properly in hot or cold temperature environments. " Do to attempt to disassemble the battery. Do not expose the battery to open flame. These activities could cause the battery to explode resulting in serious injury. " Do not contact the connectors of the battery to metal objects, or an electrical short may occur. 1-4 Locating the controls Contents 2-1 Rear View 2-2 LCD screen 2-3 Locating the controls Getting started Front View This manual covers the installation and use of the player hardware. For details regarding the software operation including transferring music to the player, please see the Software Instruction Manual. 1-5 Locating the controls Locating the controls Front view Rear view Neck strap Charging indicator Volume -, Reduce, Down Camera Hold Battery Lock Rechargeble Battery Camera lense (Previous / Fast Reverse) LCD Screen Locating the controls Locating the controls Microphone Earphone Volume +, Enlarge, Up NAVI/MENU I (Next / Fast forward) USB connection port Bottom view Camera sound speaker Rechargeble Battery Note 2-1 Power on/off, / (Play/Stop), Stereo Mode/REC/Shot MEMORY/EQ A-B (Interval repeat) Picture flip Do not push at Camera shoot sount hole by pin, needle.. etc. It is not RESET. 2-2 Locating the controls PC software installation LCD Screen Contents File format Clock Hold Battery indicator Bit rate sampling rate Status Current bar File number Playing time Playback node Folder icon Folder name Note PC software installation 3-1 Attach the player 3-4 PC software installaion Locating the controls Equalizer Visualization Program/file icon 2-3 Volume Artist/title name According to file type displayed as follows : REC : REC ASF : ASF MP3 : MP3 WMA : WMA IRM : IRM OGG : OGG " IRM (iRiver Rights Management) : iRiver Rights Management is a digital music format. Please visit our web site for details about this music format. This section covers the installation for Windows operating systems only. For installation instructions for Mac OS, please see the Software Instruction Manual. PC software installation MPORTANT, please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC. Software installation PC software installation Software installation Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD. If the installation doesn't automatically begin, execute the "setup.exe" file in the installation CD. The installation program will begin. During this installation, the software will check online for the most recent updates. Please note that the installation screens may differ slightly from those appearing here, as software may be of a more recent version. If your screens differ, please visit www.iRiverAmerica.com/software for an updated user guide the Installation CD into the CD-ROM “Next” after selecting the language to 1 Insert 2 Click drive. Installation start automatically. install. The player can store MP3 files or files of any type. You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver Music Manager Program. " Download latest versions of drivers and iRiver Music Manager at www.iRiver.com 3 Click “Next” to Install iRiver Music Manager. 4 Select the folder to Install. Click “Next”. PC software installaion PC software installaion The installation CD contains the following contents : - Device Driver - iRiver Music Manager - MoodLogic - Manager Program for Mac Please be sure your login has Administrator privileges if using Windows 2000 or Windows XP. Note System Requirements (Windows) Pentium 133MHz or faster USB port " Window 98SE / ME / 2000 / XP 3-1 CD-ROM drive 10MB free hard disk space 3-2 PC software installation Attach the player Software installation “Next” after confirming the 5 Click installation folder. Connecting to the PC 6 Click “Install” to begin the installation. 1 Connect the USB cable (provided) to the USB port of your computer. USB port on the PC Type “A” Type “A” Type “B” is in progressing. 7 Installation Click “Finish” after the installation is completed. Type “B” “USB CONNECTED” will appear on the on the player by pressing the button 2 Turn marked STEREO. Lift the protective cover 3 LCD screen of the player. over the USB port and connect the USB cable to the player. PC software installaion PC software installaion USB cable Note 3-3 USB port on the iFP-1000 Series Connect the USB cable to the PC after playback stops to avoid errors. 3-4 Attach the player Attach the player Installation of New Hardware Installation of New Hardware computer will automatically search to installing iRiver Music Manager from 1 After 2 The find your new hardware. the CD and connecting the player to your 5 The installation will continue. “Finish” 6 Click Completed the installation of “New hardware”. PC, "Found New Hardware" screen is displayed. (Windows XP) The iRiver software driver will not cause any damage to your computer. Note 3-5 a "Hardware Installation" warning message 4 Ifappears, click "Continue Anyway". screen is displayed on the PC. New hardware is installed successfully and 7 Information ready to use. PC software installaion PC software installaion “Install the software automatically 3 Select (Recommended)” and click “Next”. Windows 98SE, Windows ME, Windows 2000 O.S do not need any other device driver installation. " Install New Hardware after installing iRiver Music Manager program. 3-6 Attach the player Basic operation Safely Removing the player from the PC the “Safely Remove hardware” 1 Select after clicking the “Safe To Remove the “Stop” after selecting the device 2 Click to remove. Hardware” by using the right button of mouse. Click the “Close” after confirming the Safely Remove Hardware message. (In case of Windows XP) Basic Operation 4-1 Listening to Music 4-9 Listening to the FM radio 4-10 Recording from FM station 4-15 Digital Camera 4-19 Viewing to picture(My Album) 4-23 Basic operation PC software installaion 3-7 Click the “OK” after confirming the hardware to remove. Contents Basic operation Basic operation Turning on the player Connect the earphones as shown below. Changing functions Put the HOLD switch to “OFF”. OFF Press and hold MODE button to appears current function on the LCD screen. Push the NAVI/MENU button toward to select the desired function, then click the NAVI/MENU button to enter that mode. Pus Pus Press the PLAY/STOP button to turn on the player. The “My Image” appears on the LCD. Press it again to play. lick Long C Click Click When "Hold" is ON, the buttons on the player will not function. When stopped or in recording standby mode, the player automatically turns off according to the setting of “STOP POWER OFF” on the MENU.(Refer to page 5-19) Turning off the player Press the PLAY/STOP button to turn the player off. lick Long C 4-1 Adjusting the volume Push NAVI/MENU button to the VOL + direction to increase volume. Push NAVI/MENU button to the VOL – direction to decrease volume. Basic operation Basic operation Click To increase volume Pus To decrease volume 4-2 Basic operation Basic operation Navigation Listening to music 2 3 4 Press NAVI/MENU button and find the desired music file by pushing NAVI/MENU button to VOL + or VOL – direction. To play the files, press the NAVI/MENU button, push NAVI/MENU/VOL to the I direction or the PLAY/STOP button. Play Pus Click Upper folder To move to the upper folder, NAVI/MENU/VOL to the I If there is no upper folder, NAVIGATION stops. Click Click Delete Delete direction. Changing the playback mode Basic operation Basic operation Navigation Click 1. Displays the operating status of the player or pictures. 2. To skip to previous file, folder, picture, FM station or value. 3. To increase volume or zoom in a picture. 4. To skip forward to the next file, folder, picture, FM station or value. 5. To select NAVI/MENU function. 6. To decrease volume or zoom out a picture. 7. To turn on/off, to play or stop playback or to select FM mode 8. To select EQ mode, A-B repeat, or automatically store FM stations. EQ : NORMAL ROCK JAZZ CLASSIC U BASS METAL Xtrm EQ Xtrm 3D 9. To select function, playback mode,record/stop recording or shot. While an audio file is playing or the player is in stop mode, press MODE/REC to activate selected modes, such as Repeat or Shuffle. Menu Repeat : Click lick Long C Shuffle : Click 4-3 Intro : 4-4 Basic operation Basic operation Tuning FM stations Push NAVI/MENU/VOL to the Shooting or To flip a picture direction to select desired station. Pus Click Click Camera zoom in/zoom out Zoom in Press the STEREO/PLAY/STOP button to select Stereo/Mono. Zoom out Setting the camera Select Click Pus Settings Click Setup start Exit 4-5 Basic operation Basic operation Pus Selecting the FM stereo/mono lick Long C Exit Click Pus 4-6 Basic operation Basic operation Viewing a picture (My Album) Customizing the function settings(Menu) You can customize this setting menu according to your preference. Press and hold NAVI/MENU button will enter the menu system. Pus Previous Next Pus Full screen Click lick Long C Click Zooming a picture Click Pus Scroll between menus : Push NAVI/MENU button to the or diretion. 2. Select sub menus : Push NAVI/MENU button to the VOL+ or VOL- diretion. Select Function : Press the NAVI/MENU button. Exit : Push NAVI/MENU button to the VOL - direction. Pus Pus Click Basic operation Basic operation Zooming/cancel shifting the zoom point Click lick Long C 4-7 4-8 Listening to music Listening to the FM radio Playing music file FM radio listening Power off 1 Press and hold MODE button. The current function appears on the LCD screen. lick Long C playback mode Function Power on/play/stop A-B repeat Click Click Adjusting the volume lick Long C lick Long C NAVI/MENU/VOL to the or direction to select FM radio. 2 Push Press NAVI/MENU/VOL button to confirm. To select music file Previous Pus Pus Next To decrease To fast forward/reverse Previous folder Pus ush Long P Next folder Fast reverse ush Long P 3 Push the NAVI/MENU button to the or Pus Click Basic operation Basic operation To increase To play the folder 4-9 Click direction to select FM frequency. Pus Fast forward 4-10 Listening to the FM radio Listening to the FM radio Programming station preset manually Programming station preset automatically Automatically select stations and save them in sequential order.(It only activates while the player is not in PRESET mode) Press and hold MEMORY(A-B) button. Press NAVI/MENU/VOL button to cancel Automatically select stations and save preset mode. them in sequential order. and hold MEMORY(A-B) button. 3 Press Automatically appears memory icon and a reserved number of the preset stations. MEMORY CH 03 Click Reserved number of the preset stations. Click Auto store lick Long C 4 Push the NAVI/MENU button to the Programming station preset manually or long push NAVI/MENU/VOL to NAVI/MENU/VOL button to cancel 1 Press 2 Push the or direction to select FM preset mode. radio. ush Long P MEMORY CH 04 To slect number of the preset stations. MEMORY(A-B) button to store. Press PLAY/STOP button to cancel. 5 Press Up to 20 station can be stored. Click Click to cancel PRESET 4-11 Pus Auto memory may not work within weak transmission areas. direction to select number of the preset. Basic operation Basic operation Note or to cancel to store 4-12 Listening to the FM radio Listening to the FM radio Deleting preset station Tuning stations automatically Select the station to be deleted at preset mode. Press and hold the MEMORY/EQ(A-B) button. PRESET CH 03 PRESET CH 04 Press NAVI/MENU/VOL button to cancel preset mode. Push and hold the NAVI/MENU/VOL to or direction. The frequencies are scanned automatically. When a broadcast is receied, canning stops. ush Long P Click Auto scanning To cancel PRESET The next station will appear when station delete is completed. Push the memory button if you also want to delete the next station. FM Tuner reception may vary in different areas. While in Preset mode, auto scan and auto memory functions are not available. When the player doesn’t have any preset stations, EMPTY will be displayed at preset mode then faded out. To select stereo/mono Basic operation Basic operation Note Press the STEREO/PLAY/STOP button to select Stereo/Mono. Stereo/Mono Click 4-13 4-14 Recording the FM stations Recording the FM stations To stop FM recording Recording the FM stations Press the MODE/REC button during FM reception. The station will be recorded, the remaining recording time will be displayed on the LCD screen. Press the MODE/REC button to stop recording. " The recorded file is saved as TUNER000.REC. " It is saved in the RECORD folder. " Recorded REC files can be converted to MP3 files using iRiver Manager. (Refer to iRiver Music Manager Instruction Manual) Click Click Note Volume can not be controlled while recording. Press the PLAY/STOP button to pause the recording process. Press the PLAY/STOP button again to restart recording. Click 4-15 To play a recorded files After changing to MP3 mode, select a Tuner file in the RECORD folder, press the PLAY/STOP button. Basic operation Basic operation To pause FM recording Click 4-16 Recording voice Recording voice Recording voice To pause recording voice 1 Press and hold the MODE/REC button to appears current function on the LCD screen. Press the PLAY/STOP button to pause the recording process. Press the PLAY/STOP button again to restart recording. lick Long C the NAVI/MENU button to the or direction to select Voice mode. 2 Press Press the NAVI/MENU button (or PLAY/STOP) to go to Voice recording mode. (The recorder will be in standby mode.) Click Note Pausing the recording will not create a new file, recording will be added to the current file. Click To stop recording voice Press the MODE/REC button to stop recording. Note: After stopping a recording, starting again will create a new voice file. Click Click 3 Press the MODE/REC button and to begin recording. Click 4-17 Restart Click Note Basic operation Basic operation Pus Pause To play a recording files Press the PLAY/STOP button while stop mode. " The recorded file is saved as VOICE000.REC in the VOICE folder. " If “00:00:00” is displayed on the LCD, the player’s memory is full. To record, delete files and/or folders on the player to make some space available .(Refer to page 5-3, iRiver Music Manager Instruction Manual) " Keep the player far away enough from the source to avoid distortion in the recording. " The player can not record when the memory is full or the battery is low. " Recorded REC files can be converted to MP3 files using iRiver Manager. (Referto to iRiver Music Manager Instruction Manual) 4-18 Digital camera Digital camera Shooting Shooting 1 Press and hold MODE button. The current function appears on the LCD screen. 4 Push NAVI/MENU/VOL to the VOL+ direction to zoom in or zoom out. Zoom in Pus lick Long C Zoom out NAVI/MENU/VOL to the direction to select camera. 2 Push Press NAVI/MENU/VOL button to confirm. MEMORY/EQ(A-B) button to take a picture. 5 Press Press A-B button to flip a picture to flip a picture. Select Basic operation Basic operation Pus to flip Click Click Enter 3 Lift the camera lens into position and use the LCD screen as the viewfinder. 6 Press MODE button to take a picture. A click sound will indicate the picture is being taken. Click Note 4-19 The lens can spin left or right. Note The picture file is saved as P0206000.JPG(Pmmdd000.JPG) in the CAMERA folder. 4-20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:03:20 11:51:06+09:00 Create Date : 2004:03:20 11:50:26+09:00 Producer : Acrobat Distiller 4.0 for Macintosh Page Count : 23 Mod Date : 2004:03:20 11:51:06+09:00 Creation Date : 2004:03:20 11:50:26+09:00 Metadata Date : 2004:03:20 11:51:06+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools