ISAW Camera IEXR100 ISAW WiFi Remote Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2194334
Application ID	9mX6kwn/FgUgIOL31lCFZg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.72kB (484051 bits)
Date Submitted	2014-02-19 00:00:00
Date Available	2014-02-19 00:00:00
Creation Date	2014-01-21 17:31:32
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2014-02-04 18:10:47
Document Title	User Manual
Document Creator	Wordìš© Acrobat PDFMaker 11
Document Author:	Amon_David

ISAW WiFi Remote Controller
User Manual
(V.1.00)
1. Name of each part
1. LED Lamp
2. LCD Screen
3. Mode / RC Power button
4. Camera select button
5. Shutter / Camera off button
6. USB slot
2. General operations
Function
Button
RC Power on / off
MODE (Long)
Change camera mode
MODE
Select
camera
CAMERA
individual
Description
Select camera group
CAMERA (Long)
Recording
SHUTTER
Camera power off
SHUTTER (Long)
Connect the camera
Disconnect the camera
MODE
SHUTTER
MODE
CAMERA
Press 'MODE' button for 2 seconds
Remote controller will be turned on / off.
* When there is no button operation with RC for 5 mins, the RC
will goes to 'power save' mode.
Press 'MODE' button.
Connected camera will change to selected mode (video / photo)
Press 'CAMERA' button.
Remote controller will select each connected camera to operate.
Press 'CAMERA' button for 2 seconds.
Remote controller will control all connected camera as a group.
Press 'SHUTTER' button.
Video recording / Photo shoot
Press 'SHUTTER' button for 2 seconds.
Remote controller will turn off power of selected camera.
Press 2 buttons together for 2 seconds.
Remote controller activates to connect to the camera
Press 2 buttons together for 2 seconds.
Remote controller will disconnect from selected camera
3. USB operation
Status
Operation
RC Power off
RC Power on
Li-ion battery recharging
Ready for firmware upgrade
4. How to connect WiFi (Pairing)
Steps
Step#1.Camera
on
Image
WiFi
Camera
operation
Description
Activate WiFi in the camera. Select 'RC' in WiFi option.
Wait 1min until WiFi signal is activated in the camera.
Step#2. Standby
Press 'MODE' button for 2 seconds.
RC is standby to connect.
Step#3. Connect
Press 'MODE and SHUTTER' buttons together for 2 seconds.
RC starts to connect to the camera.
RC is connected to the camera.
Step#4. Connected
RC shows the status of multi camera control status.
Control number is the number of camera currently connected
Total cam is the total number of connected cameras.
Step#5. Status
Step#6. Mirroring
After RC is connected, LCD mirrors the camera's status.
User can monitor camera's status through RC
simultaneously.
* Connection failed
WiFi connection is failed.
Goes back to standby screen.
LCD
Total number of connection is exceeded.
Disconnect the camera in order to replace the connection
* ISAW RC can control maximum 9 cameras at the same time
* Exceed connection
WiFi is connected but signal is unstable.
Check the camera's WiFi signal status
Properly disconnect WiFi connection from the camera
*Unstable connection
5. How to disconnect WiFi (De-pairing)
Steps
Step#1.Connected
Step#2. Disconnect
Step#4. Disconnected
Step#5. Standby
Step#6.Connect
Other Cam
Image
Description
Currently connected to the camera
Press 'MODE and CAMERA' buttons together for 2 seconds.
RC starts to disconnect from the camera.
RC is now disconnected from the camera.
RC is back to standby mode.
If there is other connected camera to the RC, it will automatically
connect to other camera.
(Camera #2 is disconnected, and RC is now connected to
camera #3)
*
Disconnection
failed
WiFi disconnection is failed.
Press 'YES' button to retry the disconnection.
6. LCD Screen
Camera
LCD
Mode
WiFi
SD card
Memory
Cam battery
Recording
Rec. mode
Resolution
Quality
Remote
LCD
Current Cam
Total Cam
Shows currently connected camera status
Video mode or Photo mode
WiFi signal status
SD card connectivity
Balance memory capacity of SD card
Battery status of currently connected camera
Ready or Recording
Shows recording mode or photo setup mode
Video / Photo resolution
Image quality of video / photo
Shows remote status in LCD
RC battery
Currently connected camera's number
Total number of camera connected
All: Control all connected cameras simultaneously
One: Control individual camera currently connected
Battery status of remote controller
Image
Description
Device
7. LCD Screenplay
Function
Power save mode
When there is no button operation in RC for 5 minutes, the RC
will automatically goes to 'power save' mode.
Press any button to go back to normal status.
WiFi Interruption
When WiFi signal is weak or interrupted, LCD shows 'X' sign in
WiFi spot.
Wait for 1~2 minutes until the signal goes back to normal.
Otherwise, please check the environmental condition and reboot
the device.
No SD
SD card is not properly connected.
Check SD card connectivity in the camera
SD Error
SD card is connected, but error has occurred in SD card.
Check SD card status, and format the SD card
* When format SD card, all data will be deleted
Playback
When the connected camera changes its mode to 'playback', the
RC shows the 'Playback' message.
Press 'MODE' button to go back to video mode.
Software version
When the RC is turned off, it shows current s/w version.
Please check s/w version before upgrade.
8. Recharging Battery
- ISAW remote controller uses built in Li-ion battery power.
- Recharge the battery with USB cable included.
* Please recharge your remote controller before using it the first time.
- Running time: approximately 2 hours ~ 4 hours. (environmental due to power save mode)
- Battery recharge time: approximately 1.5 hours.
9. Firmware Upgrade
- ISAW remote controller is able to upgrade with simply software update.
- Please visit www.isawcam.com for the latest firmware upgrade of remote controller.
10. Safety Warning
- ISAW Remote Controller is designed to control the ISAW camera through WiFi signal.
- To minimize any kinds of damages from electromagnetic wave, we recommend to locate the remote
controller at least 8 inches (20cm) away from the human body.
- Remote controller is NOT a waterproof. Do NOT put the remote controller into the water.
- Do not disassemble, crush, bend, heat or insert foreign object into the device.
- Please recharge your remote controller before using it the first time.
- To ensure proper WiFi connection, please keep the distance from the camera less than 25m (80ft) Please avoid to operate the remote controller in high temperature over 60°C.
- Please avoid to operate the remote controller in high humidity environments.
- Operation in lower temperature than 0°C will cause low battery runtime.
- ISAW is not responsible for incidental or consequential damages relating to or resulting from the
use of this product of any of its parts.
11. Package Included
ISAW Remote Controller USB Cable
< part 15.105 (b) >
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following
or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
END

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Amon_David
Create Date                     : 2014:01:21 17:31:32+09:00
Modify Date                     : 2014:02:04 18:10:47+09:00
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:02:04 18:10:47+09:00
Creator Tool                    :  Word용 Acrobat PDFMaker 11
Document ID                     : uuid:47c8e799-efc5-4cd0-8cf0-eeb49b972f04
Instance ID                     : uuid:6d0d1900-7244-4ef0-9c69-2fd5aa6af713
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : Amon_David
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20140121082919
Company                         : 
Page Layout                     : OneColumn
Page Count                      : 4

EXIF Metadata provided by EXIF.tools