ISS Tech BT211 Bluetooth Hands Free Car Kit User Manual ok

Download:
Mirror Download [FCC.gov]
Document ID	807340
Application ID	rL714egp/lMXIMhLxgqDIQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	146.34kB (1829305 bits)
Date Submitted	2007-06-25 00:00:00
Date Available	2007-06-25 00:00:00
Creation Date	2007-02-02 18:04:37
Producing Software	Corel PDF Engine Version 11.721
Document Lastmod	2007-06-21 17:58:38
Document Title	ok说明书-英文.cdr
Document Creator	CorelDRAW 11.0 版
Document Author:	郭吉军

BT211
BLUETOOTH HANDS FREE CAR KIT
MANUAL OF BT211
BLUETOOTH HANDS FREE CAR KIT
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
MANUAL OF BT211
BLUETOOTH HANDS FREE CAR KIT
01
02
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
BT211 car kit can provide the following functions :
1. BT V1.2, HFP / HSP , AVRCP/A2DP;
2. Compatible with almost all mobile phones with bluetooth;
3. Auto pairing;
4. Pairing up to 4 phones, automactically connected to the last paired phone;
5. Full duplex conversation, DSP arithmetic for echo cancellation & noise
reduction;
6. Caller ID read out in English;
7. High powered ampifier output and uses the vehicle's speakers;
8. Directional high sensitive microphone;
9. Voice dialing, redial, pick up, hang up;
10. Automatic loudspeaker mute.
11. Microphone mute.
The BT-211 Car Kit allows you to use your mobile phone in the
car with the highest level of comfort and safety. You can use
your phone without taking your hands from the wheel.
Kit Contents:
Your conversation is amplified through the vehicle s speakers
and microphone of BT-21
1.
FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER¡¯S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2.
This device must accept any interference received, including interference that may cause undesired operation.
1.Keypad
4.Microphone
2.Power supply/
speakers cable
3.Electronic
control unit
5.User's manual
FITTING
If your BT-211 is installed by a professional, skip directly to the next chapter.
The BT-211 comprises an electronic control unit, a microphone, a 5-buttons
keypad and ISO connector plug for the car stereo.
04
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
Electronic control unit
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
Description of the Key function :
Do not install the control unit near the vehicle's heater or air conditioning
unit. Do not expose it to direct sunlight sunlight. Avoid enclosing the unit
inside the vehicle's metal wings or panels, which affect the quality of the
Bluetooth connection.
Microphone
The microphone must be pointed towards the driver and preferably fitted
between the sun visor and the rear-view mirror.
Key
Keypad
You are advised to fit the keypad where it can easily be reached, preferably
on a flat surface that has been cleaned. Ensure that the Blue LED's light up
and switch off according to the position of the key in the ignition.
Send out
Volume +
Bluetooth
Short Press
Volume Up
Hang Up
Disable
Voice Prompt
Caller ID
Private Mode/ Enable Voice
Prompt Caller
Long press Handsfree
ID
Mode
Pick Up/
Redail
Volume -
Volume down Reject/
MIC Mute/
Hang Up/
PLAY/STOP
Voice Dialing
Power cable and audio cable
Power cable is fitted with black ISO connector and audio cable is fitted with
brown ISO connector.
Car stereo with ISO plugs
Disconnect the car stereo's audio and power leads. Join the female
connectors of the audio cable and power supply cable to the car stereo.
Join the vehicle's audio and power cables to the male connectors of BT211.
If your car stereo with a mute or telphone wire, connect the yellow wire of
the mute cable to the mute wire.
Refer to your car stereo's manual to determine the position of the mute or
telephone cable.
05
LED lights indications
Red / Green LED indicator
Pairing mode : Flash fast
Connecting : Flash slowly
Connected : Always high
Connectable : Flash slowlier
Blue LED indicator : Power on
Specificaion
Power : 10 ~ 16V DC
Fuse : 2A/0.5A
Speaker : Max 5W
Microphone : Directional miceophone
Noise Suppression : Up to 18 dB
Echo Suppression : Up to 50dB
Operation temperature range : - 30 C ~ + 80 C
06
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
Local MIC mute
Pairing
After installation, you should pair your mobile phone with the hands-free kit.
1. Enable the Bluetooth mode on your mobile phone.
2. Search for any peripherals.
3. For further information, refer to the chapter entitled  in your
mobile phone's user guide .
4. Once detected, "ISS BT211" will be is displayed on your phone.
Select it.
5. Enter the link code ( 0000 ) when prompted by your phone and then
confirm. After paired, you can use the handsfree function.
During conversation, if you do not hope the far end user to hear your voice
temporarily, press the round button of the kit's keypad once to mute your
microphone; Press it again to cancel.
The Pairing with Bluetooth AV adaptor
You can pair and connect from BT AV adaptor terminal voluntary，(just for
the default password of AV adaptor is 0000 , otherwise it will be failed.),
then you will enjoy the music from AV adaptor. If there is a incoming call
when enjoying music, the hands free car kit will be switched to the calling
and waiting pick up.it can switch to music automatically after calling.
Answering a call
Press the kit's
button once to receive the call when incoming calling ring.
Press the
button once on the hands-free kit to reject call when incoming
calling ring.
Making and Receiving Calls
Audio remote control
If you bluetooth phone support A2DP/AVRCP, you may try transfering the
MP3 playing to bluetooth hands free car kit, and enjoy the music from the
car stereo. When playing, press the round button of bluetooth hands free
car kit to stop, and press it again to play.
Making a call manually
Dial the number using the phone's keypad.
The conversation automatically switches to hands-free mode.
Ending a call
Press the
button once on the hands-free kit to end the calling.
Redial function (just for phone with hands free )
Press the
key once on the handsfree kit to redial the last number calling.
and
during conversation.
Private mode
Car stereo without an ISO plug
During conversation, if you want to switch to your mobile, press and hold
the
3 second, it will be switched you mobile phone;
You can use a specific adapter for the vehicle (not supplied)， If you do not
have an adapter, please connect the power and audio wire one by one.
Press and hold it again to switch to hands-free car kit.
If the car stereo has a mute jack, connect the yellow wire of the mute cable.
Voice Dialing
When hands free is idle, short-press
button once to enter voice dialing
mode ( this function depends on the cell phone ).
07
The red wire of the power cable must be connected to the constant 12V
supply, the yellow wire connected to the ignition 12V, and the black wire
grounded .
Check the wiring diagram of the car stereo's ISO power connector plug on
some vehicles, the positions of the red and orange wires may need to be
reversed, This can easily be done by reversing the fuse holders.
Do not connect the orange wire to the constant 12V supply , as it will run up
the vehicle's battery .
Volume adjusting
You can adjust the voice volume by pressing
CAUTION
The connection of line out
If there is a audio amplifier in your car, you can connect directly the line out
to line in of car audio amplifier, and enjoy stereo audio .
08
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
MANUAL OF BT211 BLUETOOTH HANDS FREE CAR KIT
Electronic control box
Cable diagram connection :
Keypad
Lineout
White L
Lineout
Red R
Mute cable
Yellow
Connect to car
audio line input
Power cable
1 1
2 2
Car's power cable plug
3 3
4 4
Loud speakers
1 1
= =
2 2
= =
3 3
= =
4 4
= =
= =
= =
= =
= =
= =
= =
= =
= =
Microphone
Car audio
09
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9e3e5541-f7d3-4c2b-a5cc-e71da012ec77
Producer                        : Corel PDF Engine Version 11.721
Modify Date                     : 2007:06:21 17:58:38+08:00
Create Date                     : 2007:02:02 18:04:37Z
Creator Tool                    : CorelDRAW 11.0 版
Metadata Date                   : 2007:06:21 17:58:38+08:00
Document ID                     : uuid:65f03bed-d8d0-44c0-84f7-bc376713f07d
Format                          : application/pdf
Title                           : ok说明书-英文.cdr
Creator                         : 郭吉军
Author                          : 郭吉军

EXIF Metadata provided by EXIF.tools