ISV ISD-210 900 MHz DSSS Digital Cordless Telephone User Manual users manual 2 of 5

Download:
Mirror Download [FCC.gov]
Document ID	136262
Application ID	xz6QUE9o9EfRF0lNlcngwA==
Document Description	users manual 2 of 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.27kB (490828 bits)
Date Submitted	2001-02-13 00:00:00
Date Available	2001-02-13 00:00:00
Creation Date	2001-02-05 14:10:07
Producing Software	Acrobat 4.05 Scan Plug-in for Windows
Document Lastmod	2001-02-05 14:17:17
Document Title	users manual 2 of 5
Document Creator	Acrobat 4.05 Scan Plug-in for Windows

900Mllz DSST CORDLESSPHONE with CALLER 1D ON CALLW’AITINC USA VERSION. ‘
' " _ ' _ '_ __ l
HEpIDSETJuck-
Allow you m add a hendsex to the handset (not included. but available by order.)
, HEAD SET
2 JACKAVAILABLF,
ISV co, LTD.
FCC 11): 953151).le
JOB it: 594U0
EXHIBIT #: XE
900mm DSST CORDLESSPHONE with CALLER lD ON CALLWAITING USA VERSION.
m“
SETTING UP YOUR PHONE
Now that you‘ve checked the contents of the canon. it only takes a few steps
to set up your phone.
STEP 1. CHOOSE A CENTRAL LOCATION FOR THE BASE UNIT
The base should be away from all other electronic equipment such as a personal computer‘
microwave, stereo ,or television. It is also a good idea to place the unit away from
noisy areas, or from heat sources such as a radiator or direct sunlight.
STEP 2. PLUGINCORDS
You can set your MRSI 100 telephone on a tabletop
When on a tabletop, you can place the handset with the keys facing forward
To use on a tabletop or desk;
1. Take the long telephone line cord that comes with the phone and plug one end into the
labeled TEL-LINE
2. Thread the long line cord through the channel in the housing to secure the cord.
3, Take the remaining end and plug i! into the wall jackt
4. Plug the adapter tips into the adapter jack. Be sure that the tip is all the way into the jack.
5. Thread the adapter cord through the channel on the left-hand side of the bracl ISV CO., LTD.
__ FCC ): PE3ISD-210
JOB #: 594U0
EXHIBIT #; 4,ng
900MH2 DSST CORDLESSPHONE with CALLER ID ON CALLWAITING USA VERSION.
STEP 3. PLUG IN THE ADAPTER
Plug the adapter into an electrical outlet. Without AC power, your phone does not operate.
STEP 4. ADD THE BATTERY TO THE HANDSET
Use this procedure to install or to replace a "dead" battery.
fl CAUTION
Use only Ni-MH AAA 3. 6V 550mAH bat/ery m the phone,
1. Press down on the battery cover and slide
the battery cover down to expose the
battery well.
to
Locate the battery connectors inside the
battery well.
If you are replacing a dead battery, remove
the old battery by pulling firmly on the t
battery cords.
Battery Replacement
3. lnsert the battery, It is polarized and only insert in one direction.
4. Place the battery in the battery well.
5. Replace the battery door.
STEP 5. TURN THE HANDSET ON
You MUST install the battery on the handset to turn on and use your phone“.'
1. Check the power is on and appears on the display
2. You’ll hear the handset‘s ready tones
STEP 6. CHARGE THE HANDSET
Before you use the phone for the first time, you need to charge the battery
for at least 6 hours.
Place the handset in the base of the phone. The charge light the base then comes on.
And then you will see the following display,
0 How many total calls you have.
ALL 23 NEW 03
0 How many new calls you have since you
last reviewed your calls.
Whenever you need to charge your handset. you will see the " BATI‘” icon display at the st-by mode and
you will hear short beeps and see the "BATI" icon display message while in use.
Press TALK and listen for dial tone to test for a fully charged handset. ISV C O., LTD.
FCC ID: PE3ISD-210
JOB #; 594U0, ,.
EXHIBIT #: XH
QOOMHZ DSST CORDLESSPHONE with CALLER ID ON CALLWAITING
_____________.__..___———-————
STEP 7. Beginning the programming Sequence
Most of the programming options appear in one screens.
Press PGM key, “ PGM, DIR " appears on the screen.
_PGM DIR
USA VERSION.
When you make a selection, the check mark, “_" moves to the selection you have made to use A (VOL) V key.
If you make a selection a DIR mode, please see using speed dialing or creating a speed dialing on page 13.
After making a selection a PGM mode, press # V (review) key, the next programming screen appears.
if you make a mistake, press *4 (review) key to go back to the previous prompt or start the programming
sequence again.
To begin the programming sequence, press PGM key and then press # P (review) key.
Set up procedure. PYESS # ’ (T W) key _‘
To select a PGM mode To enter a my area code To enter local area code
' 1 2 3 4 s s
. . , t t
__, -|
To select To turn call waiting ID on/ 7 To select a language
_’ DiALING METHOD Tone/ ' ol'i' .
Pulse ‘1
To select phone for To select Ring on or off SET UP COMPLETE
_» Manual Answer(off) or
Auto answer (on)
STEP 8. Setting area codes
Many regions are changing how customers use their area codes. in order to dial from your call records,
the MRS] 100 needs to distinguish between local and long distance numbers.
I if your region has seven digit dialing (you don't need to dial your area code when
making a local call), enter your local area code as described in to set your local
area code below.
I If your region requires that you always dial ten digits when making local calls.
also follow the procedure under to set other local area codes.
If you are unsure on how your region works, please contact your local telephone ISV CO, LTD.
FCC ED: PE3ISD-210
—-——————-————_— JOB #: 594U0
EXHIBIT #: g}
900MHZ DSST CORDLESSPHONE with CALLER ID ON CALLWAITING USA VERSION.
——-——_—__—_
TO ENTER AN AREA CODE, use the keypad.
If you make a mistake, press “DELETE" key , retype the area code.
8-1 To set your local area code
If you set your area code. the MRS] l00 telephone removes the area code from a call
record within your own area. You need [0 program the code in order to dial with call records.
1. Press " PGM " key
MY AREA CODE
L)
Press (review) Ni key.
The my area code screen displays.
Press A (VOL) V key to enter your area code.
The cursor appears on the display as you press the dial keys.
if you make a mistake, press ”DELETE“ key, and reenter the area code.
8-2 To set other local area codes
These are area codes also allow the MRS] [00 to distinguish between local and long-distance calls.
If you live in an area where you dial ten digits for telephone numbers in other local area codes ( without
dialing a "i”), you can program your other local area codes in this section.
Afier enter your area code. you can enter up to six other local area codes
1, Press "PGM" key and . Press (review) ># key twice to skip a MY AREA CODE.
LOCAL AREA 1 LOCAL AREA 2,~,
LOCAL AREA 3 LOCAL AREA 4
LOCAL AREA 5 LOCAL AREA 6
2. Press (review) Pi? key. The local area 1 screen displays.
Press (review) ># key again,
Press (review) ># key again.
Press (review) ># key again.
Press (review) ># key again.
Press (review) bl? key again.
The local area 2 screen displays.
The local area 3 screen displays.
The local area 4 screen displays.
The local area 5 screen displays.
The local area 6 screen display
ISV CO., LTD.
FCC ID: PE3ISD—210
JOB #: 594U0
EXHIBIT #-. j;

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:02:05 14:17:17-08:00
Create Date                     : 2001:02:05 14:10:07-08:00
Creator                         : Acrobat 4.05 Scan Plug-in for Windows
Producer                        : Acrobat 4.05 Scan Plug-in for Windows
Page Count                      : 5

EXIF Metadata provided by EXIF.tools