ITOMA ITCKS503 Alarm Clock Radio Bluetooth User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3195341
Application ID	aL3PsOKYxAcHmgkXrlUHKg==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	341.27kB (4265879 bits)
Date Submitted	2016-11-14 00:00:00
Date Available	2016-11-14 00:00:00
Creation Date	2016-11-14 13:46:18
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2016-11-14 13:46:18
Document Title	未命名 -2
Document Creator	CorelDRAW X6
Document Author:	lenovo

SETTING THE ALARM
LISTEN TO THE RADIO
(with the Radio standby operation)
CARE AND MAINTENANCE
BLUETOOTH CONNECTED
12:38
Bluetooth
Your clock radio has two separate alarms that can be set and used independently.
Besure that you have set the wake up time correctly by observing the LED display.
xxxxxxxx
BT
CKS503BT
xxxxxxxx
xxxxxxxx
SAT
1/2 wake up to Radio
1 wake up to a “Single beep” sound
2 wake up to a “Double beep” sound
MHz
If the PM indicator is ‘on’ = PM
If the PM indicator is ‘off ’ =AM
PM
MON
TUE
WED
THU
FRI
SAT
SUN
Alarm Week Mode
·Ever yday-Monday~Sunday
·Weekdays only-Monday~Friday
·Weekends only-Saturday~Sunday
1 Press MODE slightly until the “ BT ” indicator is shown on
1 4
1 Press MODE until the “MHZ” indicator is
shown on the display.
·Preset Alarm
2 Press either TUNE▲ or TUNE▼
slightly,
the
NOTES: If you want to set wake up to radio, please go through the procedures
of “SETTING THE ALARM” again after you complete the above steps.
·Storing Stations Automatically
Select ‘CKS503BT’ from the device list when it appears on
your device screen.
The apparatus must not be exposed to dripping or splashing and objects
filled with liquids, such as vases, must not be placed on the apparatus.
NOTES: The unit do not have
Hands-free speakerphone function
receiving frequency will increment or
decrement by one step.
3 Set the volum by pressing either V+ or
V-
 to a level that desired.
4 Press and hold the for 2s to turn off the radio.
Keep
the
clock
radio
away
from
other
electronic
devices
to
avoid
radio
interference.
For better reception, fully extend and adjust the position of the FM antenna.
the display.
Care Of Cabinets
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet
becomes smudged or dirty, clean it with a soft, slightly dampened cloth .
Never allow water or any liquid to get inside the cabinet. Never use any
abrasive cleaners or cleaning pads as these will damage the finish of your
radio.
Lithium Battery Precautions
• Dispose of the old batter y properly. Do not leave it lying around where a
young child or pet could play with or swallow it. If the batter y is swallowed,
contact a physician immediately.
• The batter y may explode if mistreated. Do not attempt to recharge it or
disassemble it. Do not dispose of the old batter y in a fire.
CHANGING THE LITHIUM BATTERY
This marking indicates that this product should not be disposed
of with other household wastes throughout the countr y. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle this unit responsibly so as to
promote the re-use of material resources. To return your used
device, please use return and collection systems or contact the
retailer where the product was purchased as they know how to
safely recycle this product.
SAT
Press and hold SET until the display blinks.
MON
TUE
THU
WED
IMPORTANT NOTICE
It will store 20 stations automatically
to the memor y location.
FRI
indicator 'Flashes'
MHz
P 01-P 20 = The memor y location to store 1-20
change the batter y
1 2 5
·Recalling A Station
1 Press AL 1(or AL 2) slightly, and repeat doing so if necessar y,
until AL 1 indicator is shown on the display.
(Make sure the radio is ON)
Press and hold AL 1(or AL 2)
Press TUNE▼
to
adjust Hour
CR2032(3V)
Press TUNE▲ to adjust Minutes
Press and hold AL 1(or AL 2)
Press MODE to select the Alarm Week Mode, and the mode will
change by one step.
MHz
POSITIVE(+)
To avoid missing your wake up time, even if you set the radio to a ver y low volume or even
silence (Level 0-8) before turning off the radio, medium radio volume (Level 8) will gradually
increase at wake up time.If you need a louder volume for your wake up time, set the radio
at higher volume (Level 8-15)before turning it off, that will gradually increase the radio
volume to the same preset level when wake up time comes.
1 Press SET, and “P XX” will show on the display.
2 Press either TUNE▲ or TUNE▼
slightly,
can change the memor y
Wake up to Buzzer : It will begin softly and gradually increase in volume.
Wake up to Radio : it will begin softly and gradually increase in volume, but
no louder than the volume you set when listening to radio.
NOTES: If you want to set wake up to radio, please refer to
“LISTENING TO THE RADIO” for more information.
location is tuned by one step.
·SNOOZE/REPEAT/STOP ALARM
Press SLEEP
Press either SET▲or SET▼

(±1
min
per
click). It will change rapidly by
long pressing.
Press SLEEP
(+10 min
per
click) 2
min
≤Timer≤
90
min
If you want cancel the Timer, press and hold
‘OFF’ .
FRI
Z Z Snooze for
a few extra minutes sleep.
The alarm will stop for 9 minutes and then comes “ON” again.
1 When the alarm turns “ON”, you can press
until MHZ indicator
NOTES:Remember that the station and volum settings you choose for the Sleep To
Radio operation are the same settings you will hear if you set the alarm for Wake To
Radio the follow morning.
2 Press






to
stop
the
alarm
sooner.

3 If you want to turn off the alarm permanently ( instead of following
DIMMER CONTROL
the default setting ) , press AL 1 or AL 2 to turn off the alarm .(AL1 or
AL2 indicator will be off)
(with the Radio standby operation)
You can reset the dimmer when Radio
with standby
AUX IN
Press
FRI
AUX
Dimmer
3-Level: Bright-Dark-Low
USB FOR CHARGING
SAT
Connect the audio source from its earphone jack to with a 3.5mm
Male to Male stereo AUX cable (not included).
2 Press MODE slightly until the “AUX” indicator is lit on the display.
The mode will change by one step.
The batter y backup is intended for short power outages only. The unit ’s primar y
functions cannot run on the batter y backup alone. This unit uses a button cell
batter y that will last up to 1 year and maintains the time.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
DO NOT INGEST BATTERY,CHEMICAL BURN HAZARD
This product contains a coin/button cell battery.If the coin/button cell battery is
swallowed,it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.If the battery compartment does
not close securely,stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body,seek immediate medical attention.
FCC
NEGATIVE(-)
WARNING
·Sleep
To
Timer
Output 5V 1A for charging
portable digital audio player.
Daylight Saving Time is NOT observed in Hawaii, American Samoa, Guam,
Puerto Rico, the Virgin Islands and in, most of Arizona, with exception of the
Navajo Indian Reservation in Arizona. Beginning in 2007, this Clock Radio
will automatically advance by one hour at the beginning of Daylight
Saving Time on the second Sunday in March. And it will automatically
return to Standard Time on the first Sunday in November. If you live in an
area that does not observe Daylight Saving Time it will be necessar y for
you to manually set the clock back one hour at the beginning of the
Daylight Saving Time, and forward one hour at the end of Daylight
Saving Time. A simple way to do this is to change the TIME ZONE setting. Set
the clock to the next higher numbered time zone at the beginning of
Daylight Saving Time, and set the clock back to your correct time zone at
the end of Daylight Saving Time.
FCC Part 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
SPECIFICATIONS
AUDIO
Frequency Range(FM).......................................................87.5-108 MHz
Speaker Impedance........................................................................4 Ω
GENERAL
Bluetooth Version.......................................................................... V.4.1
Power Adapter..........................................................................DC 5V IN
Output Power ...........................................................................0.8W x 2
Batter y Backup.............................................. .3V CR2032 Lithium Batter y
(Lithium batter y will work for approximately 3 years
before needing to be replaced with new batter y)
Dimensions..........................................8.27(W) ×1.77(D) ×3.07(H) inches
Weight......................................................................................0.86 lbs
Specifications are subject to change without notice.
FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH
MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Part 15.105 Warning Statement
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to tr y to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and
your body.
1-Year Limited Warranty
iTOMA (Hong Kong) Company Limited (iTOMA) warrants to be original consumer of this
iTOMA product that it will furnish a replacement for, or, at its sole option, repair any part
which proves (upon inspection by iTOMA) to be defective under normal use within 1
year of the original purchase date.
This warranty does not apply to appearance items, including, but not limited to,
antennas, knobs, cabinets, or cases, and in the case of batteries, for damage caused
by leaking batteries. It also does not apply to the product, or to any part thereof, that
has been damaged through misuse or negligence.
Furthermore, this warranty will become invalid if, in the judgment of iTOMA the product
or any part thereof has been installed incorrectly, repaired or altered by other than
iTOMA Service Department.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state. Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how long an implied warranty
lasts, so the above exclusions and limitation may not apply to you.
For Service, Warranty, or Product Information,
Please contact iTOMA (Hong Kong) Company Limited,
info@itoma.com.hk
PLEASE SAVE THIS CARD TOGETHER WITH ORIGINAL DATED PROOF OF
PURCHASE FOR YOUR RECORDS AND FOR CUSTOMER SERVICE.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2016:11:14 13:46:18+08:00
Create Date                     : 2016:11:14 13:46:18+08:00
Metadata Date                   : 2016:11:14 13:46:18+08:00
Creator Tool                    : CorelDRAW X6
Format                          : application/pdf
Title                           : 未命名 -2
Creator                         : lenovo
Document ID                     : uuid:38ed1cdb-a1e4-4947-a62d-f75c76806e69
Instance ID                     : uuid:680695a5-c212-439c-b195-eb90b90a6bc1
Producer                        : Corel PDF Engine Version 16.1.0.843
Page Count                      : 1
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : lenovo

EXIF Metadata provided by EXIF.tools