Ibis Networks 200 RF Module User Manual DataSheetSinglex

Download:
Mirror Download [FCC.gov]
Document ID	2638518
Application ID	QxDtiHCD5+/tU12pLfooUQ==
Document Description	User Manual - IS-201
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.24kB (140445 bits)
Date Submitted	2015-06-05 00:00:00
Date Available	2015-06-05 00:00:00
Creation Date	2015-06-02 08:24:40
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2015-06-02 14:29:43
Document Title	Microsoft Word - DataSheetSingle.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ibisadmin

IS-201
InteliSocket™
FEATURES
•
•
•
•
•
•
•
120V 15A
UL Certification
ZigBee Pro
128 bit AES Security
20dBm RF Power
Surge Protected
0C to 40C
DESCRIPTION
The IS-201 is a smart socket which meters plug load energy usage and provides device on/off
capability. It works with other InteliSocketsTM to form a secure wireless mesh network for
control and reporting of data. Each network has an InteliGatewayTM base station providing
connectivity to the Ibis InteliNetworkTM, a cloud-based data collection and analysis application.
InteliSockets can be configured to operate on any of the 15 ZigBee channels. In addition, the
hive (PANID) has over 4000 possible settings, preventing nearby systems from interfering with
each other.
PERFORMANCE
Parameter
Input Voltage (RMS)
Input Frequency
Output Current (RMS)
Output Power
Power Consumption
Reporting Interval
Accuracy (Energy)
Accuracy (Voltage)
Accuracy (Interval)
Resolution
RF Range
RF Transmit Power
Sockets per Network
ZigBee Channels
ZigBee Hive
Size
Ibis Networks
05/28/15
Symbol
VIN
Min
108
Typ
120
60
IOUT
POUT
Max
132
15
1800
15
255
0.5
50
20
120
25
0x3FFF
11
0x3000
4.1 x 2.2 x 1.7
¡ 828 Fort Street Mall Suite 600 ¡ Honolulu, HI 96813 ¡ www.ibisnetworks.com
Units
Hz
ms
W-s
dBm
inches
IS-201
InteliSocket™
COMPLIANCE
Agency
UL916 – Energy Management Equipment
ZigBee Profile (Ibis Automation)
FCC
File
E470522
0x114B
2AECN200
ENVIRONMENTAL
Parameter
Operating Temperature
Storage Temperature
Relative Humidity
Symbol
TO
TS
RH
Min
-40
Typ
25
Max
40
100
95
Units
InteliSockets are for indoor use only.
PROTOCOL
InteliSockets use the Ibis custom ZigBee profile for commands, acknowledgements, and
reporting of data. Refer to the V2 Protocol documentation for details.
DATA
InteliSockets report data typically every 15 seconds. Each report packet is comprised of socket
type, ZigBee channel, ZigBee hive (PANID), interval (seconds), voltage (RMS), frequency (Hz),
energy (watt-seconds), and power factor (fraction). From these data we can calculate
instantaneous power (watts) and current (amps).

 

  
 


   ¡  
The InteliGateway appends additional information (IP, timestamp, location, etc.) before
uploading to the InteliNetwork. This allows any socket in the world to be located and
addressed individually.
Ibis Networks
05/28/15
¡ 828 Fort Street Mall Suite 600 ¡ Honolulu, HI 96813 ¡ www.ibisnetworks.com
IS-201
InteliSocket™
PUSHBUTTON
The small pushbutton on the side provides addition control features. First and foremost, it is a
manual override for turning the outlet on and off (toggle). If pressed for at least two seconds, it
causes a reboot of the socket. Finally, if the pushbutton is pressed while plugging in the socket,
a factory reset is performed causing the socket to revert back to factory default settings. This is
a useful feature for maintenance purposes.
LED
The LED on the front indicates the state of the socket. When red the outlet is off; green is
outlet is on. If LED is blinking, the socket has not yet associated with a mesh network. During a
reboot, the LED will flash yellow for a second.
FCC
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the
approval of manufacturer could void the user’s authority to operate this equipment.
To satisfy RF exposure requirements, this device and its antenna must operate with a
separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
Ibis Networks
05/28/15
¡ 828 Fort Street Mall Suite 600 ¡ Honolulu, HI 96813 ¡ www.ibisnetworks.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : ibisadmin
Create Date                     : 2015:06:02 08:24:40Z
Modify Date                     : 2015:06:02 14:29:43-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : ibisadmin
Title                           : Microsoft Word - DataSheetSingle.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:06:02 14:29:43-07:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:73a496a6-6ea1-41cc-820b-58b1611a27e0
Instance ID                     : uuid:0c45e6ea-4210-4e7e-89f2-81b5df27bb32
Page Count                      : 3

EXIF Metadata provided by EXIF.tools