Ibm Remote Supervisor Adapter Ii Users Manual SlimLine And

2015-02-02

• Contents
• Chapter 1. Introduction
  • Remote Supervisor Adapter II features
  • Web browser and operating-system requirements
  • Notices used in this book
• Chapter 2. Opening and using the Web interface
  • Logging in to the Remote Supervisor Adapter II
  • Remote Supervisor Adapter II action descriptions
• Chapter 3. Configuring the Remote Supervisor Adapter II
  • Setting system information
    • Setting server timeouts
    • Setting the date and time
    • Synchronizing clocks in a network
    • Disabling the USB device driver interface
  • Creating a login profile
  • Configuring the global login settings
  • Configuring remote alert settings
    • Configuring remote alert recipients
    • Forwarding alerts
    • Setting remote alert attempts
    • Setting remote alerts
    • Setting local events
  • Configuring the serial connectors
  • Configuring the dual serial connectors for serial redirection
    • Serial-to-serial redirection
    • Serial-to-Telnet redirection
    • Configuring the command-line interface settings
  • Configuring port assignments
  • Configuring network interfaces
    • Configuring an Ethernet connection to the Remote Supervisor Adapter II
    • Configuring PPP access over a serial connection
  • Configuring network protocols
    • Configuring SNMP
    • Configuring SMTP
  • Configuring LDAP
    • Setting up a client to use the LDAP server
    • Configuring the LDAP client authentication
    • Configuring the LDAP search attributes
  • TCP Command Mode Protocol
  • Service Location Protocol (SLP)
  • Secure Web server and secure LDAP
    • Configuring security
    • SSL certificate overview
    • SSL server certificate management
      • Generating a self-signed certificate
      • Generating a certificate-signing request
    • Enabling SSL for the secure Web server
    • SSL client certificate management
    • SSL client trusted certificate management
    • Enabling SSL for the LDAP client
  • Configuring the Secure Shell server
    • Generating a Secure Shell server key
    • Enabling the Secure Shell server
    • Using the Secure Shell server
  • Using the configuration file
    • Backing up your current configuration
    • Restoring and modifying your ASM configuration
  • Restoring ASM defaults
  • Restarting ASM
  • Logging off
• Chapter 4. Monitoring remote server status
  • Viewing system health
  • Viewing the event log
  • Viewing vital product data
• Chapter 5. Performing Remote Supervisor Adapter II tasks
  • Server power and restart activity
  • Remotely controlling the power status of a server
  • Remote control
    • Important information about updating your Remote Supervisor Adapter II firmware
    • Remote console
    • Remote console keyboard support
    • Remote disk
  • Setting up PXE network boot
  • Serial redirection quick setup
  • Updating firmware
  • Accessing remote adapters through an ASM interconnect network
• Chapter 6. Command-line interface
  • Accessing the command line
  • Logging in to the command-line session
  • Command syntax
  • Features and limitations
  • Utility commands
    • exit command
      • Description
    • help command
      • Description
    • history command
      • Description
      • Example
  • Monitor commands
    • clearlog command
      • Description
    • fans command
      • Description
      • Example
    • readlog command
      • Syntax
      • Description
      • Example
    • syshealth command
      • Description
      • Example
    • temps command
      • Description
      • Example
    • volts command
      • Description
      • Example
    • vpd command
      • Syntax
      • Description
      • Example
  • Server power and restart control commands
    • power command
      • Syntax
      • Description
    • reset command
      • Syntax
      • Description
  • Serial redirect command
    • console command
      • Syntax
      • Description
  • Configuration commands
    • dhcpinfo command
      • Syntax
      • Description
      • Example
    • ifconfig command
      • Syntax
      • Description
      • Example
    • ldap command
      • Syntax
      • Description
    • ntp command
      • Syntax
      • Description
      • Example
    • passwordcfg command
      • Syntax
      • Description
      • Example
    • portcfg command
      • Syntax
      • Description
      • Example
    • slp command
      • Syntax
      • Description
      • Example
    • srcfg command
      • Syntax
      • Description
      • Example
    • ssl command
      • Syntax
      • Description
      • Parameters
    • tcpcmdmode command
      • Syntax
      • Description
      • Example
    • timeouts command
      • Syntax
      • Description
      • Example
    • users command
      • Syntax
      • Description
      • Example
  • ASM control commands
    • clearcfg command
      • Description
    • clock command
      • Syntax
      • Description
      • Example
    • resetsp command
      • Description
    • update command
      • Syntax
      • Description
      • Example
• Appendix A. Getting help and technical assistance
  • Before you call
  • Using the documentation
  • Getting help and information from the World Wide Web
  • Software service and support
  • Hardware service and support
  • IBM Taiwan product service
• Appendix B. Notices
  • Trademarks
  • Important notes
• Index