Ibm Thinkpad 92P1989 Users Manual

92P1989 to the manual f5658a13-5df9-4a80-b1fd-0177d438e90e

: Ibm Ibm-Thinkpad-92P1989-Users-Manual-431943 ibm-thinkpad-92p1989-users-manual-431943 ibm pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

ThinkPad
Setup Instructions
Unpack:

One - Handed Latch

ThinkPad® computer

Battery pack

Modem cord

2 TrackPoint® caps

Power cord

AC adapter

ThinkLight®
Keyboard Light
Illuminates your keyboard,
so you can work in the dark

UltraConnectTM
Wireless Antenna
Optimal placement provides
superior range and performance

Welcome

Books

Volume and Mute Buttons

- Setup Instructions (this sheet)
- Service and Troubleshooting Guide
- Other supplements or flyers

* See reverse for notes about unlisted,
missing, or damaged items and recovery CD.

Install battery pack:
Your battery is ready to use.

Wireless Radio Control

1

Note: Some ThinkPad computers
may only have one battery latch.

Presentation Director
Easily give presentations or use
multiple monitors

2

EasyEject
Use to undock and remove
attachable devices

Connect to power:
Access IBM

Internet Navigation Keys
Web browser back and forward

Turn on the power:

Full Screen Magnifier
Zooms the entire screen

Point and click with UltraNavTM Multi-pointing Navigation System:
Press the IBM TrackPoint cap or move across the touch pad in the direction you want to move
the pointer. The left and right buttons below the space bar and touch pad function like mouse buttons.
Some models may have only a TrackPoint.
Configure the Operating System following on-screen instructions:
This process takes several minutes, and your computer may restart multiple times.

Press the Access IBM Button to learn more:

Fn Key
Use in combination with keys
with blue icons to access
special ThinkPad features

TrackPoint Center Button
Scroll documents or magnify an
area of the screen

P/N: 92P1989

Installing Optional memory
You can increase the amount of memory in your computer.

You can get information about ThinkVantage Technologies
at any time by pressing the blue Access IBM button on your keyboard.

Note: Only use memory types supported by your computer. If you incorrectly install the optional memory or install an
unsupported memory type, a warning beep will sound when you try to start the computer. To replace the standard memory
that is accessed by removing your keyboard, refer to the procedure described within Access IBM.

1

Security
Some ThinkPad computers have an embedded security chip.
To learn about downloading the soft ware and enabling the chip, enter
" security chip" in the Access IBM keyboard search field.

Install the optional SO-DIMM:

1

Touch a grounded metal object to reduce
any static electricity in your body that could
damage the SO-DIMM. Avoid touching the contact
edge of the SO-DIMM.

2

Turn off the computer.

3

Disconnect the ac adapter and all cables from the
computer.

4

Close the computer display and turn the computer
over.

5

Remove the battery.

6

Loosen the screws on the memory slot cover, and
then remove the cover.

8

Align the notch in the contact edge of the SO-DIMM
with the divider in the socket. Firmly insert the
SO-DIMM into the socket at an angle of 20 degrees
1 , and then pivot it downward until it snaps into
place 2 .

Access Connections
Some ThinkPad computers are equipped with a wireless LAN adapter.
To learn more about configuring wireless LAN and other communication
adapters, enter "Access Connections" in the Access IBM keyword search
field.

Migration
You can move data from your old computer to this ThinkPad.
Enter "migration" in the Access IBM keyword search field to learn about
downloading free data migration soft ware.

IBM Help and Support
To learn about IBM Help and Support, choose the Get Help & Support
category in Access IBM.

9

Replace the memory slot cover.
Attention: Never use the computer with the
memory slot cover open.

* Additional unpacking notes: 1) Some models may contain items that are not listed. 2) If any
item is missing or damaged, please contact your place of purchase. 3) Your computer
features IBM Disk-to-Disk Recovery. Everything for recovering factory-installed files and
applications is on your hard disk eliminating the need for a recovery CD. For more information,
see "Recovering Pre-Installed Software" in the Service and Troubleshooting Guide.

10 Replace the battery and re-connect the AC
adapter and cables.
7

If a SO-DIMM is already installed, remove it as
shown. Save the SO-DIMM for future use.

Your name:
Company name:
Model number:
Serial number:
Company or reseller service:
IBM service Web site:
IBM service number:

2

Verify proper installation of the optional SO-DIMM:
1 Turn on computer.
100% Recycled Paper.
Printed in the USA.

2 Press the Access IBM button when prompted during startup.
3 Double-click the "Start setup utility" icon to open the IBM BIOS Setup Utility.
4 Verify that the "Installed memory" item shows the total amount of memory installed in your computer. For example, if your
computer had 256 MB of standard memory and you install an additional 512 MB SO-DIMM, the quantity shown in
"Installed memory" should be 768 MB.

© Copyright IBM Corporation 2003
The following terms are trademarks of the IBM Corporation in the United States
or other countries or both:
IBM, ThinkPad, TrackPoint, ThinkLight, ThinkVantage, UltraNav, and UltraConnect.

Barcode



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2003:07:15 04:47:21Z
Modify Date                     : 2003:07:15 13:49:45+09:00
Page Count                      : 2
Creation Date                   : 2003:07:15 04:47:21Z
Mod Date                        : 2003:07:15 13:49:45+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:07:15 13:49:45+09:00

EXIF Metadata provided by EXIF.tools