Icon Health and Fitness BTAUD1 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3789429
Application ID	jsfMDYlW79ueDSl9tr5cNw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.53kB (206596 bits)
Date Submitted	2018-03-21 00:00:00
Date Available	2018-03-21 00:00:00
Creation Date	2018-03-20 09:46:38
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-03-20 09:46:38
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	w

Icon Health and Fitness, Inc.
Bluetooth module BTAUD1 USES instructions.
Product Name: Bluetooth Module
Main Model: BTAUD1
1. Product Overview:
This Bluetooth audio board is used to carry the Bluetooth audio module f-3200. The main functions include:
1. Provide voltage and mute signals;
2. The auxiliary audio signal is provided to the Bluetooth audio module to detect whether the auxiliary audio
interface is inserted and the detection signal is provided to the module;
3. The audio output of the Bluetooth audio module is converted into the stereo signal of the headset with the chip
(TPA6132A2).
4. Provide key function for Bluetooth audio module;
5. Provide three-color LED circuit to display its state;
6. Provide external antenna for Bluetooth audio module;
2. Application Fields
Bluetooth audio

Bluetooth Stereo Headset
Bluetooth speakerphone.
Bluetooth wireless transmission audio
3. Basic Characteristics
Bluettoth V 4.2 Specification Support
AVRCP V1.6
A 2DP V 1.6
HSP V 1.2
DI V 1.3
True Wireless Stero(tws)
Support multi-point connection（Mulripoint Support For A2DP）
Encoding support aptX,aptX Low Latency,SBC,AAC(apt-X Lossless coding CSRA64215support)
Built-in 10 frequency point EQ adjustment.
Built-in 6 segment 5 frequency point fixed sound effects.
Melod Expansion 3D sound support.
Audio dynamic range compression support.

multi-language support
4. Performance Parameter:
Main Model
BTAUD1
Bluetooth Specification
Bluetooth V 4.2
Modulation System
n/4 DQPSK.8DPSK
Service Voltage
3.3V –3.7V
Icon Health and Fitness, Inc.
Support
Bluetooth Protocol
HFPV1.6.HSP V1.2 A2DPV1.3,AVRCPV1.6,DIV1.3
Working Current
≤150 mA
Standby Current
50uA
Temperature Range
-40C°-+80C°
FCC/IC Statements
(OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF
Module. For 15 B (§15.107 and if applicable §15.109) compliance, the host manufacturer is
required to show compliance with 15 while the module is installed and operating.
Furthermore the module should be transmitting and the evaluation should confirm that the
module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the
integrator has to apply the appropriate equipment authorization (e.g. Verification) for the new host
device per definition in §15.101.
Integrator is reminded to assure that these installation instructions will not be made available to
the end-user of the final host device.
The final host device, into which this RF Module is integrated" has to be labeled with an auxiliary
label stating the FCC ID of the RF Module, such as "Contains FCC ID: OMCBTAUD1
"This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause
undesired operation."
"Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment."
the Integrator will be responsible to satisfy SAR/ RF Exposure requirements, when the module
integrated into the host device.
The final host device, into which this RF Module is integrated" has to be labeled with an auxiliary
label stating the IC of the RF Module, such as" Contains transmitter module IC: 3673A-BTAUD1
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1)this device may not cause interference, and(2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présentappareilestconforme aux CNR d'Industrie Canada applicablesauxappareils radio
Icon Health and Fitness, Inc.
exempts de licence. L'exploitationestautorisée aux deux conditions suivantes :(1) l'appareil ne
doit pas produire de brouillage, et(2) l'utilisateur de l'appareildoit accepter tout
brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
d'encompromettrelefonctionnement.
Module statement
The single-modular transmitter is a self-contained, physically delineated, component for which
compliance can be demonstrated independent of the host operating conditions, and which
complies with all eight requirements of § 15.212(a)(1) as summarized below.
1) The radio elements have the radio frequency circuitry shielded.
2) The module has buffered modulation/data inputs to ensure that the device will comply with Part
15 requirements with any type of input signal.
3) The module contains power supply regulation on the module.
4) The module contains a permanently attached antenna.
5) The module demonstrates compliance in a stand-alone configuration.
6) The module is labeled with its permanently affixed FCC ID label.
7) The module complies with all specific rules applicable to the transmitter, including all the
conditions provided in the integration instructions by the grantee.
8) The module complies with RF exposure requirements.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
This equipment could not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with the FCC multi-transmitter product procedures.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : w
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2018:03:20 09:46:38+08:00
Modify Date                     : 2018:03:20 09:46:38+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools