Icon Health and Fitness M14172ANTB Heart Rate Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2449190
Application ID	/ZWZtbcylfIdJ+qLuJfDKg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.19kB (152415 bits)
Date Submitted	2014-11-19 00:00:00
Date Available	2014-11-19 00:00:00
Creation Date	2014-11-17 10:57:34
Producing Software	Adobe Acrobat Pro 9.3.2
Document Lastmod	2014-11-17 10:57:34
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 9.1 Word 版

LIMITED WARRANTY
COMPLIANCE INFORMATION
ICON Health & Fitness, Inc. (ICON) warrants this product
to be free from defects in workmanship and material,
under normal use and service conditions. Parts are warranted for one (1) year from the date of purchase.
UNITED STATES
FCC Statement. This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This warranty extends only to the original purchaser (customer). ICON’s obligation under this warranty is limited
to replacing or repairing, at ICON’s option, the product
through one of its authorized service centers. All repairs
for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a service
center, freight charges to and from the service center will
be the customer’s responsibility. If replacement parts are
shipped while the product is under warranty, the customer
will be responsible for a minimal handling charge. For
in-home service, the customer will be responsible for a
minimal trip charge. This warranty does not extend to
freight damage to a product. This warranty will automatically be voided if the product is used as a store display
model, if the product is purchased or transported outside
the USA, if all instructions in this manual are not followed,
if the product is abused or improperly or abnormally used,
or if the product is used for commercial or rental purposes.
No other warranty beyond that specifically set forth above
is authorized by ICON.
ICON is not responsible or liable for indirect, special, or
consequential damages arising out of or in connection
with the use or performance of the product; damages with
respect to any economic loss, loss of property, loss of
revenues or profits, loss of enjoyment or use, or costs of
removal or installation; or other consequential damages of
any kind. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly,
the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all
other warranties, and any implied warranties of merchantability or fitness for a particular purpose are limited in their
scope and duration to the terms set forth herein. Some
states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply
to the customer.
This warranty provides specific legal rights; the customer
may have other rights that vary from state to state.
ICON Health & Fitness, Inc.
1500 S. 1000 W., Logan, UT 84321-9813
Part No. 363397 R0814A
Heart Rate Monitor
Model Number IFHRM214.0
QUESTIONS?
FCC Warning: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
this equipment.
If you have questions after reading this manual,
please contact Customer Care:
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Outside US: Call the telephone number on the front
cover of the user’s manual included with your fitness
equipment, or contact the establishment where you
purchased the heart rate monitor.
This device meets the FCC and IC requirements for RF
exposure in public or controlled environments.
CANADA
IC Statement. This device complies with Industry Canada
license exempt RSS standard(s). Operation is subject
to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must
accept any interference received, including interference
that may cause undesired operation.
US: 1-800-288-4802
Note: If you need a replacement user’s manual, go
to www.iconfitness.com.
WARNING: To reduce the risk of serious injury, read the following important
precautions before using the heart rate monitor. ICON assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
1.
It is the responsibility of the owner to
ensure that all users of the heart rate
monitor are adequately informed of all
precautions.
2.
Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35, for
persons with pre-existing health problems, for persons who have an implanted
medical device such as a pacemaker, or
for persons who are taking medication
regularly.
3.
If you have heart problems, or if you are
over age 60 and have been inactive, do
not use pulse-driven workouts.
4.
Over exercising may result in serious injury or death. If you feel faint, if
you become short of breath, or if you
experience pain while exercising, stop
immediately and cool down.
This Class B digital apparatus complies with Canadian
ICES-003.
Printed in China © 2014 ICON Health & Fitness, Inc.
ANT+™ is a trademark of Garmin Ltd. or its subsidiaries.
The BLUETOOTH® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
and are used under license. IFIT is a registered trademark of ICON Health & Fitness, Inc.
HOW TO PUT ON THE HEART RATE MONITOR
CARE AND MAINTENANCE
TROUBLESHOOTING
The heart rate monitor consists of a chest strap
and a sensor. Attach the sensor to the chest strap
by pressing the posts on the sensor into the snap
fasteners on the chest strap.
• Thoroughly dry the electrode areas on the chest
strap with a soft towel after each use. Moisture
may keep the heart rate monitor activated, shortening the life of the battery.
If the heart rate monitor does not function properly,
try the steps below.
The heart
rate monitor
must be worn
under your
clothes, tight
Strap
against your
skin. To put on
the heart rate
monitor, wrap
the chest strap
Sensor
around your
chest, and
slide the loop
on one end of
the chest strap onto the clip on the other end of the
chest strap. Make sure that the logo on the sensor
is right-side-up. Then, adjust the length of the chest
strap, if necessary, and position the chest strap as
shown.
• Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic
bag or other container that may trap moisture.
Next, pull the
chest strap
Electrode Areas
away from
your body a
few inches
and locate the
two electrode
Strap
areas. Using a
saline solution,
such as saliva
or contact lens solution, wet the electrode areas.
Then, return the chest strap to a position against
your chest.
• Do not expose the heart rate monitor to direct
sunlight for extended periods of time; do not
expose it to temperatures above 122° F (50° C) or
below 14° F (-10° C).
• To clean the sensor, use a damp cloth and a small
amount of mild soap. Then, wipe the sensor with
a damp cloth and thoroughly dry it with a soft
towel. Never use alcohol, abrasives, or chemicals to clean the sensor. Hand wash and air dry
the chest strap.
• Make sure that an ANT+ receiver or a
BLUETOOTH® Smart receiver is included in
your fitness equipment. The heart rate monitor
is designed to transmit to compatible ANT+ or
BLUETOOTH Smart fitness equipment.
• Make sure that you are wearing the heart rate
monitor as described in HOW TO PUT ON THE
HEART RATE MONITOR. If the heart rate monitor
does not function when positioned as described,
move it slightly lower or higher on your chest.
• If heart rate readings are not displayed until you
begin perspiring, rewet the electrode areas.
• For the console to display heart rate readings,
you must be within arm’s length of the console.
• The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart
rate reading problems may be caused by medical
conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.
• The operation of the heart rate monitor can be
affected by magnetic interference from high power
lines or other sources. If you suspect that
magnetic interference is causing a problem, try
relocating the fitness equipment.
• If the heart
rate monitor still does
not function
properly,
remove the
sensor from
the chest
strap and
locate the
battery cover
on the back
of the sensor. Insert the edge of a coin into the
slot in the battery cover, turn the battery cover
counterclockwise, and remove the battery cover.
Next, remove the old battery and insert a new
CR 2032 battery; make sure that the battery is
oriented so that the text is facing away from
the sensor. Then, reattach the battery cover and
turn it clockwise.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any
interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible
d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2014:11:17 10:57:34+08:00
Creator                         : Acrobat PDFMaker 9.1 Word 版
Modify Date                     : 2014:11:17 10:57:34+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:11:17 10:57:34+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Format                          : application/pdf
Document ID                     : uuid:4fca01cb-b046-4635-b156-8fe7ad1ab078
Instance ID                     : uuid:cda32abf-71a5-4ef4-813e-79a62b51ccaf
Producer                        : Adobe Acrobat Pro 9.3.2
Page Count                      : 3

EXIF Metadata provided by EXIF.tools