Imation IPUIHB11 Bluetooth Enabled Wall Charger User Manual Product Name

Imation Corp. Bluetooth Enabled Wall Charger Product Name

Updated Manual

Download: Imation IPUIHB11 Bluetooth Enabled Wall Charger User Manual Product Name
Mirror Download [FCC.gov]Imation IPUIHB11 Bluetooth Enabled Wall Charger User Manual Product Name
Document ID1541414
Application IDmLulkOOfPxBRUiAKfnSnug==
Document DescriptionUpdated Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize26.48kB (331027 bits)
Date Submitted2011-09-14 00:00:00
Date Available2011-04-28 00:00:00
Creation Date2011-06-03 14:49:34
Producing SoftwarePDFlib 7.0.3 (C++/Win32)
Document Lastmod2011-06-03 14:50:27
Document TitleProduct Name:
Document CreatorWPS Office 个人版
Document Author: Erdal Caglayan

User Manual
1.
Buttons and Connections
2.
Charging with InCharge Home BT
2.1 Charging an iPod / iPad / iPhone
i. When you plug InCharge Home BT into the Wall outlet, The LED will NOT turn on.
ii. When a USB Device is plugged into the USB socket, up to 2.1A of power will be supplied
immediately.
3.
Connecting to Bluetooth
3.1 Connecting to InCharge Home BT via Bluetooth
i. Hold down the ʻsyncʼ button for 2 seconds, this will allow the Bluetooth device to be discovered.
ii. The LED will begin to slowly Flash Blue.
iii. Then, the User selects "InCharge Home BT" from the Bluetooth List on their device. If the device
requires a pairing code, use "0000".
iv. Once the device has successfully paired, there will be an audible ʻbeepʼ sent to the stereo and the
LED will stop flashing and stay solid blue.
v. If the unit is not paired after five minutes, the LED will turn off.
vi. InCharge Home BT will remember the device that it is paired with, and link to it each time that
InCharge Home BT is powered on and/or the device is in range.
4.
Playing Audio over Bluetooth
4.1 Playing wireless Audio over Bluetooth
i. The user must have their radio set to AUX and the 3.5mm cable properly connected.
ii.
Use the audio device to control playback features such as play or pause.
User Manual
5.
Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.
This device complies with industry canada licence-exempt RSS standard(s). Operation is
suject to the following two conditions:(1) this device may not cause interference, and(2) this
device must accept any interference, including interfernce that may cause undesired operation
of the device.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Erdal Caglayan
Create Date                     : 2011:06:03 14:49:34+08:00
Modify Date                     : 2011:06:03 14:50:27+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Erdal Caglayan
Title                           : Product Name:
Creator Tool                    : WPS Office 个人版
Metadata Date                   : 2011:06:03 14:50:27+08:00
Producer                        : PDFlib 7.0.3 (C++/Win32)
Document ID                     : uuid:75cf4259-0170-4bec-a6cf-5397da6627ab
Instance ID                     : uuid:9df08761-e8b0-4b4f-be0b-e1510621c8f3
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PB4-IPUIHB11

Navigation menu