Imation TDKA28 Wireless Speaker User Manual Doc1

Imation Corp. Wireless Speaker Doc1

User Manual

Download: Imation TDKA28 Wireless Speaker User Manual Doc1
Mirror Download [FCC.gov]Imation TDKA28 Wireless Speaker User Manual Doc1
Document ID2451504
Application ID5/jcyBT7LzOohBGVCCDa3A==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize34kB (424994 bits)
Date Submitted2014-11-21 00:00:00
Date Available2014-11-21 00:00:00
Creation Date2014-11-20 18:45:35
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2014-11-20 18:45:35
Document TitleMicrosoft Word - Doc1
Document CreatorPScript5.dll Version 5.2.2
Document Author: Maikou.Zhang

@TDK
Llfa on Recon!
TREK Flex
A28
Refer to the Included Important Safety Instructions. Please read and save thls Quick Start
Gulde, Important Safety Instructlons and Warranty. For oddtttonal Information please go to
TDern‘ormanoecom,
[OCAHON OF CONTROLS
'0! ap
l. Aux Jack 8. Volume Indlcators
24 Charge Mlcro USB Jack Q Volume + Button
3. NFC (Near Fleld Communloatlon) 10. Huefooth Indicator
4. Battery OFF/ON Mtch l l. Huefoofh Button
5. Power Indlcator 12. Phone/Haleause/Sklp lndlcotor
6. Power Button la. Phone] Play/Pouse/ Sklp Button
7. Volume - Button
1/7
2/7
RECHARGING THE BATTERY
Connect the smaller end of the supplled
USB cable to the Charge More 083 Jack
9 (mder firm) md the other end to a
powered L68 Jack on yourcomputer or an
AC powersuppty (not Included).
When the spedcer's powerls on and
charalng the Power/Battery lndloator
wlll llght red, and llght amber when fuly
charged. When the unlt ls off and charghq,
the Parlor/Battery Indlcator wll Ilght red
and turn oftwhen fully charged. The Power]
Battery lndcatorwlll bllnk red when It ls In
need of chorglng.
To check battery status (when the unlt ls on), press and hold the Power button for three seconds;
the Volume lndcators wlll bllnk to lndlcate the battery chaoe a: tolowa:
One LED: 020%. Two LEDs: 21% Three LEDe: til-60%. Fou LEDs: arm Ftle LEDs: 51-10095.
Note: The battery wlll provlde cpproxtnately elaht hours of operatlon at normal Ilstenlng level.
Rechargeable Battery Notes:
- Each tlme you charge (no alscharoe the battery (charge cycles). battery capaclty stlghtt/
dlmlnlshee. Rechargeable batterles have a Imlted number of charge cycles and need to be
replaced eventually.
r You may wlsh to replace you battery when or before, the battery does not suppty enoudt
power to functton your devtce. Aloe, proper dtsposal ls essentlal from envlronmentd and safety
polnt of vtew. Putting my battery dlrectty tn the trash wlll harm the envlronment.
0 Do not lnclnerate.
r If you do not plan on uslng the battery for a month or more turn off the mob power (OFF/
ON) swltch and store It In a clean dry, cool place away from heat and metd objects.
Rechargeable batterlet wll seltalscharge durhg storage; remember to recharge the
batterles every three months and before use.
0 If battery has not been chageatormore that H) months, perform a corple of full chage/
dlecharge cycles to lmprwe battery capaclty.
r lt ls recommended to charge the batterles for more that eloht hours before first use.
Replaclng the Rechargeable Battery:
Ifthe battery does not suppty enoudr power, vlslt www.1dkperformance.com tor 8
Instructions on battery replacement.
PAIRING A llUETOO‘I'H DEVICE
l . Wlth the unlt on, press the Bluetoovh
button oto select Bluetodh mode.
2. Prea and hold the Buetooth button 0 for
approxlmotety three seconds until the
fluetooth Indlcotor bllnks qulckty to male
the speaker ‘dlsccwerable'.
3. 0n the Buetooth dance. enable
Hustooth and select 'TREK Flet' from
the Devlce Ust. If the Bluetooih devlce
ads for a passkq, use 'oow. Some
fluetooth aevlceswll ask you to accept
the connection. If the unlts are palred
property, the speaker will beep and the
auetooth Indlcator wlI lbh‘t solld blue. If
It tolled. The MOO"! Indlcotorwlll bllnk
slowty. Note: After you pair a devlce. thls
TREK Fleur wlll remember It for future use.
When In Bluetooth mode the Euetoorth
Indlcatorwlll Ight bl ue It connected to a
Huetooth devlce. If not connected to a
Euetoom devlce. the Buetooth Indlcator wlll
btlnk slowty. (bout once elery 2-3 seconds.
PAIHNG WITH NFC ' - oulres NFC Enabled Phone
NFC otters a slmpe setup method for
yourTREK Flex speaker Slmpty turn on "he
TREK Flex speaker and hold ’he NFC
enabled devlce NFC on the devlce
must be ‘on') wthln a few centlmeters of
the NFC qmbol on top of the TREK
Flex speaker to pair and establlsh a
Hustooth connection. It'sjmt that simple.
OPERATION
. Side the Battery OF F/ON ewltch ° to the ON posttton; tt‘e unlt will enter the Standby mode.
. Press the Power button 0 to turn the unlt on; the Power ndlcator will llaht anrber (lf battery
chaged).
Comect the uwlt vla NFC (see above) or palrwlth o Huetodh devloe (see prevlous coumn).
Pres the Phone/Ploy/Pouse/Sklp button 0 to start ploytodc Pres the Phone/Play/Pouse/Sklp
button 0 each to pause or resume playback
Press the Volume + 0/— 0 buttons to adjust thevolume.
Press the Phone/Pkw/Pause/Sklp button 0 MICE to advance to the next track.
Pres the Phone/PloflPouse/Sklp button 0 THREE TIMES to go back to the prevlous 170cc
To tun the unttoff, plea the Power button 0 agaln. To save the rechargeabe battery. sllde
the Battery OFF/ON swltdn ° to the OFF posltbn.
es» ~—
PT'PSI'
3/7
USING THE AIIX IN JACK
insert one end of an audio cable (not Included)
into the LINE OUT‘ack on your externd audio
unit and the othe' end Into ‘he AUX IN lock
underhe flap, The Aux dev ce will automatioalt,
be semted when the audio cabie is
connected. Start playback of the external unit
and live eulernul audio unll's ouipui sound will
be head through the TREK Fieu' s spedcers.
The Phone/Piay/Fause/Sklp button will not
function when using the Au): In JOCK
ANSWERING A PHONE CALL
When Ieceivtng a phone cal on your paired
Huetooth device. press the Dhone/Pio/lii’ausel
Skip button 0 to answer (the indicator will light
amber; and use he bum-In 'nlcrophone on
this TRE< Flex to take the cal Press twice to
dLsconhectl end he callr
SPLASH RESISTANT
The TRE< Flex is spash redstcnt, but cannot
be submerged In water or be subjected to
a constant flow of water. In order to ensure
the product is splash resistant, close the
rubberflap on the TREK Flex. then smooth
out entre flap until flap is flush with the
sides of the unit.
Cattfled to an li¢l7 under international standard IECO2202 ‘or prcrtection mainst actuarial
mechcnical impacts. However it is stiii advised to protect he TREK Flex when udng to mold
possible damage.
AUTO POWER OFF
If the TREK Flex has no audio signal for twenty minutes. he TREK Flex will turn Itself off. To
'wake‘ the TREKFiex simpy press the Power button 9.
4/7
.... ..ln’tenol NM-I Speaker Power Output... ..3W x 2
rochaaedata batterv Wireless Auden ..Buetooth A20P NRCP HFP, HSP
7.8(W)x270-I)x2.0())lnches LineinputAudIo. 35mmstereolcck
.197(W)x69(H)x75(D) mm .uptoinrnslnputsbml
1.25b USBPort SVGIAchorgeonIy
oedtvels PGrude .iP65
'nrn waishape passive radiator
Power Source (DC).
wecl‘lcailons are “elect to ctutge wlhorri notice.
TREK Is a trademark of imatlon Corp. The TDK Lle on Record Logo is a trudemak of TDK
Corporation and 5 used under license The Euebofl‘Pword mark and Iooos are soldered
trademarks owned by BIuetDoth SIG, Inc. and any use of such maria :ry Imattor Corp. Is under
license. The N Mak is o trodemak or registered trademark of NFC Foum. Inc. lr the United states
and other countries. All othertrademcrks and logos are property of their respecthre owners.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (0R BACK). N0 USERSERVICEABLE PARTS
INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
ATTENTION: Users 01 this product are cautioned not to make modflications or changes that are not approved by Imation Corp. Doing so may
void the compliance of this product and may result In the loss oi the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received. including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device. pursuant to Part 15 0f the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions.
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the bottom of the apparatus.
5/7
5/7
SURGE PROTECTORS: It is recommended to use a stage protector for AC connection. Lightning and power surges ARE NOT covered
uriderwananty forthis predict
This Class B digital apparatus complies with Canadian ICES<003.
This Class B dgital apparatus complies with European Union CE — EMC Directive (2004/1 O8/EC) and European Union CE — Low
Voltage Directive (2006/95/33). This Bluetooth module is in compliance with the essential requirements and other relevant
provisions of R&TTE Directive (1999/5/EC). This product is marked with the CE logo and uses radio frequency bands that are
harmonized throughout the European Community.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE 0F PLUG T0 WIDE SLOT AND FULLY INSERT
IMPORTANT SAFETY INSTRUCTIONS
Read these Instructions.
Keep these hstnictions.
Heed all Warnings.
Follow all Instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not bloct any of the ventilat'on openings. Install in
accordance with the manufacturer‘s instructions.
Do not instal near any heat souces such as radiators, heat
registers, stwes. or other apparatus ancluding amplifiers)
that produce heat
9. Do not defeat the safety pU'pose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for you safety. When the provided
plug does not lit into your outlet, consult an electrician for
replacement of the obsolete outlet
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles. and the
pointwhere they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
N¢9§PN9
9°
norm; alumnus
lupinlywte in mm
12. Use only with acart stand, tripod, hadet,
0f table specified by the manufacturer, or
sold with the apparatus. When a an is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightn ng
sonns or when uaned for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way.
such as power-sume cord or plug is damaged. liquid has
been spilled or objects have fallen into the apparatus. the
apparatus has been exposed to rain or moisture, does not
onerate normally, at has been dropped.
15. Toe AC mains plug is used as the power disconnect device
atd it should remain readily accessibe and operatie during
irtended use. In orderto completely disconnect the apparatus
from power, the mains plug should be completely removed
from the AC outlet socket.
16. CAUTION: To reduce the risk of fire or explosion, do not
e
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:11:20 18:45:35+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2014:11:20 18:45:35+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Doc1
Creator                         : Maikou.Zhang
Document ID                     : uuid:c1d0eda4-3856-42af-9a7f-7ee2a322dad7
Instance ID                     : uuid:3f0bd5f8-1662-4381-9ab7-8b8a39b91015
Page Count                      : 7
Author                          : Maikou.Zhang
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PB4-TDKA28

Navigation menu