Immedia Semiconductor BAM00300U Blink Alarm User Manual 3 625 insert
Immedia Semiconductor Inc. Blink Alarm 3 625 insert
Exhibit D Users Manual per 2 1033 b3
Thank you for purchasing Blink !
You can install Blink in three easy steps:
1. Download the Blink Home Monitor App
2. Connect your Sync Module
3. Add your camera(s) and alarm(s)
Please check support.blinkforhome.com for our
full setup guide.
Step 1: Head to the App Store or
Google Play Store to download the
Blink Home Monitor App.
Step 2: Gather the items from the Sync Module box
and launch the Blink app. You will start setup by
plugging in the Sync Module.
Step 3: After connecting the Sync Module, you
will be directed to add a camera or alarm.
Remove your devices and batteries from the box
and follow the Blink app instructions to proceed.
After setting up your account you will (A) connect
your phone via WiFi to your Sync Module and then
(B) use your phone to connect your Sync Module to
your WiFi network. Please carefully follow the on
screen instructions.
AB
AlarmCamera
Technical Support
In the event that you encounter issues with system
set-up or functionality, there are a few ways to reach us:
1. Visit support.blinkforhome.com for system instruc-
tions, troubleshooting information, and links to contact
us directly for support. This is also available from the
curtain menu in the App’s main screen by selecting Visit
Blink Knowledge Base.
2. Directly through the Blink Home Monitor App - select
Contact Customer Service from the curtain menu located
in the upper left-hand corner of the App’s main screen.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement
Important Product Information
Before using your Blink System please read the privacy policy
located at www.blinkforhome.com/privacy.html. Please also read all
rules and policies for Blink and Blink related services and websites
at www.blinkforhome.com/terms.html. Please also read the Blink End
User License Agreement at www.blinkforhome.com/EULA.html. The
aforementioned terms, rules, notices, policies and provisions are
collectively the “Agreements”.
By using Blink you agree to be bound by the terms of the Agreements.
Your Blink system is covered by a One-Year Limited Warranty. Details
are available at www.blinkforhome.com/warranty.html.
Copyright Immedia Semiconductor 2015.
BATTERY WARNING STATEMENT:
-Keep batteries out of the reach of children
-Insert the batteries in the proper direction as indicated by positive (+) and negative (-) markings in
battery compartment.
-It is highly recommended to use Lithium batteries with this product. Do not mix old and new batteries
or batteries of different types (for example, Lithium and alkaline batteries).
-Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance
with Local and National Disposal Regulations.
-If a battery leaks, remove all batteries and recycle or dispose of them in accordance with battery
manufacturer’s recommendations for cleanup. Clean battery compartment with a damp paper towel
or follow battery manufacturer’s recommendations. If fluid from the battery comes into contact with
skin or clothes, flush with water immediately.
PRODUCT DISPOSAL INFORMATION
Dispose of the product in accordance with Local and National Disposal Regulations.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. The equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Immedia Semiconductor: Immedia, 100 Burtt Rd, Suite 100, Andover MA 01810, tel 718-915-1920