Immedia Semiconductor BCM00100U Blink Camera User Manual 3 75 insert
Immedia Semiconductor Inc. Blink Camera 3 75 insert
Exhibit D Users Manual per 2 1033 b3
Thank you for purchasing Blink !
You can install Blink in three easy steps:
1. Download the Blink Home Monitor App
2. Connect your Sync Module
3. Add your Camera(s)
Please check support.blinkforhome.com for our
full setup guide.
Step 1: Head to the App Store or
Google Play Store to Download
the Blink App.
Step 2: Gather the items from the Sync Module box
and launch the Blink app. You will start setup by
plugging in the Sync Module.
Step 3: After connecting the Sync Module, you will
be directed to add a camera. Remove your camera
and batteries from the box and follow the Blink app
instructions to proceed.
After setting up your account you will (A) connect
your phone via WiFi to your Sync Module and then
(B) use your phone to connect your Sync Module to
your WiFi network. Please carefully follow the on
screen instructions.
AB
Technical Support
In the event that you encounter issues with system
set-up or functionality, there are a few ways to reach us:
1. Visit support.blinkforhome.com for system instruc-
tions, troubleshooting information, and links to contact
us directly for support. This is also available from the
curtain menu in the App’s main screen by selecting Visit
Blink Knowledge Base.
2. Directly through the Blink Home Monitor App - select
Contact Customer Service from the curtain menu located
in the upper left-hand corner of the App’s main screen.
INDUSTRY CANADA STATEMENT
Complies with the Canadian ICES-003 Class B specifications.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
Important Product Information
Before using your Blink System please read the privacy policy
located at www.blinkforhome.com/privacy. Please also read all
rules and policies for Blink and Blink related services and websites
at www.blinkforhome.com/terms. Please also read the Blink End
User License Agreement at www.blinkforhome.com/EULA. The
aforementioned terms, rules, notices, policies and provisions are
collectively the “Agreements”.
By using Blink you agree to be bound by the terms of the Agreements.
Your Blink system is covered by a One-Year Limited Warranty. Details
are available at www.blinkforhome.com/warranty.
Copyright Immedia Semiconductor 2015.
BATTERY WARNING STATEMENT:
-Keep batteries out of the reach of children
-Insert the batteries in the proper direction as indicated by positive (+) and negative (-) markings in
battery compartment.
-It is highly recommended to use Lithium batteries with this product. Do not mix old and new batteries
or batteries of different types (for example, Lithium and alkaline batteries).
-Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance
with Local and National Disposal Regulations.
-If a battery leaks, remove all batteries and recycle or dispose of them in accordance with battery
manufacturer’s recommendations for cleanup. Clean battery compartment with a damp paper towel
or follow battery manufacturer’s recommendations. If fluid from the battery comes into contact with
skin or clothes, flush with water immediately.
PRODUCT DISPOSAL INFORMATION
Dispose of the product in accordance with Local and National Disposal Regulations.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. The equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Responsible party: Immedia, 100 Burtt Rd, Suite 100, Andover MA 01810, tel 718-915-1920