Immedia Semiconductor H1621502 Blink Sync Module User Manual 3 625 insert 5 panel
Immedia Semiconductor Inc. Blink Sync Module 3 625 insert 5 panel
Exhibit D Users Manual per 2 1033 b3
Thank you for purchasing Blink ! You can install Blink in three easy steps: 1. Download the Blink Home Monitor App 2. Connect your Sync Module 3. Add your camera(s) and alarm(s) Step 2: Gather the items from the Sync Module box and launch the Blink app. You will start setup by plugging in the Sync Module. After setting up your account you will (A) connect your phone via WiFi to your Sync Module and then (B) use your phone to connect your Sync Module to your WiFi network. Please carefully follow the on screen instructions. Step 3: After connecting the Sync Module, you will be directed to add a camera or alarm. Remove your devices and batteries from the box and follow the Blink app instructions to proceed. Technical Support In the event that you encounter issues with system set-up or functionality, there are a few ways to reach us: 1. Visit support.blinkforhome.com for system instructions, troubleshooting information, and links to contact us directly for support. This is also available from the curtain Please check support.blinkforhome.com for our full setup guide. Step 1: Head to the App Store or Google Play Store to download the Blink Home Monitor App. (Lithium AA) (Lithium AA) menu in the App’s main screen by selecting Visit Blink Knowledge Base. 2. Directly through the Blink Home Monitor App - select Camera Alarm Contact Customer Service from the curtain menu located in the upper left-hand corner of the App’s main screen. Important Safeguards When using electrical appliances, to reduce the risk of fire, 5. Do no operate this or any appliance with a damaged cord electric shock, and/or injury to persons basic safety or plug or after the appliance malfunctions or has been procedures should always be followed, including the damaged in any manner. Return appliance to an authorized following: service facility for examination, repair, or adjustment. 1. Read all instructions carefully. 6. Do not use attachments that are not recommended by the 2. To protect against electric shock, do not place cord, manufacturer; they may cause fire, electric shock or injury. plug or appliance in water or other liquids. 7. Do not use Sync Module outdoors. 3. Close supervision is always necessary when this or any 8. Do not use product for commercial purposes. appliance is used by or near children. 4. Do not allow anything to rest on the power cord. Do not plug in cord where people may walk or trip on it. IMS-MN02001-OP, Rev 1.5 9. To unplug, grip plug and pull from wall outlet. 10. Do not use appliance for other than intended use. BATTERY WARNING STATEMENT: INDUSTRY CANADA STATEMENT -Keep batteries out of the reach of children This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. -Insert the batteries in the proper direction as indicated by positive (+) and negative (-) markings in battery compartment. -It is highly recommended to use Lithium batteries with this product. Do not mix old and new batteries or batteries of different types (for example, Lithium and alkaline batteries). -Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations. -If a battery leaks, remove all batteries and recycle or dispose of them in accordance with battery manufacturer’s recommendations for cleanup. Clean battery compartment with a damp paper towel or follow battery manufacturer’s recommendations. If fluid from the battery comes into contact with skin or clothes, flush with water immediately. PRODUCT DISPOSAL INFORMATION Dispose of the product in accordance with Local and National Disposal Regulations. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Immedia Semiconductor: Immedia, 100 Burtt Rd, Suite 100, Andover MA 01810, tel 781-915-1920 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement Important Product Information Before using your Blink System please read the privacy policy located at www.blinkforhome.com/privacy.html. Please also read all rules and policies for Blink and Blink related services and websites at www.blinkforhome.com/terms.html. Please also read the Blink End User License Agreement at www.blinkforhome.com/EULA.html. The aforementioned terms, rules, notices, policies and provisions are collectively the “Agreements”. By using Blink you agree to be bound by the terms of the Agreements. Your Blink system is covered by a One-Year Limited Warranty. Details are available at www.blinkforhome.com/warranty.html. Copyright Immedia Semiconductor 2017. Brochure Printed in China.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : 3.625-insert-5-panel Metadata Date : 2017:01:17 13:24:57-05:00 Modify Date : 2017:01:17 13:24:57-05:00 Create Date : 2016:12:07 20:37:41-05:00 Creator Tool : Adobe Illustrator CC 2014 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 124 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12954 bytes, use -b option to extract) Instance ID : uuid:716e87c9-9a42-42fc-8aac-89df85892ed8 Document ID : xmp.did:4e053825-3a83-4d91-9a51-c1fbfc80dc6b Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:f4f8bfb3-608b-a940-87bd-187d9eb4131b Derived From Document ID : xmp.did:fb1bd8c6-af81-4bca-acd2-f06a5dd48211 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:f3eb6488-556f-4719-8331-ed387605bc77, xmp.iid:4e053825-3a83-4d91-9a51-c1fbfc80dc6b History When : 2015:09:29 21:30:14-04:00, 2016:12:07 20:37:36-05:00 History Software Agent : Adobe Illustrator CC 2014 (Macintosh), Adobe Illustrator CC 2014 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/emilywuest/Desktop/jobs/Immedia/blink logos/blink_logo_nTagline.eps, /Users/emilywuest/Desktop/jobs/Immedia/box insert brochure /camera-img.jpg Manifest Reference Document ID : xmp.did:f9d2004c-f53b-4c8b-9c0f-baa0d30f62a8, adobe:docid:photoshop:f7656b73-a7be-1178-af80-e0d1c2da76cd Manifest Reference Instance ID : xmp.iid:f9d2004c-f53b-4c8b-9c0f-baa0d30f62a8, xmp.iid:5beb73f3-d2b9-4258-b748-17f31227b0fb Ingredients File Path : /Users/emilywuest/Desktop/jobs/Immedia/blink logos/blink_logo_nTagline.eps, /Users/emilywuest/Desktop/jobs/Immedia/box insert brochure /camera-img.jpg Ingredients Document ID : xmp.did:f9d2004c-f53b-4c8b-9c0f-baa0d30f62a8, adobe:docid:photoshop:f7656b73-a7be-1178-af80-e0d1c2da76cd Ingredients Instance ID : xmp.iid:f9d2004c-f53b-4c8b-9c0f-baa0d30f62a8, xmp.iid:5beb73f3-d2b9-4258-b748-17f31227b0fb Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 18.125000 Max Page Size H : 3.625000 Max Page Size Unit : Inches Font Name : MyriadPro-Regular, Roboto-Light, Roboto-Regular, Roboto-Medium Font Family : Myriad Pro, Roboto, Roboto, Roboto Font Face : Regular, Light, Regular, Medium Font Type : Open Type, TrueType, TrueType, TrueType Font Version : Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 1.100141; 2013, Version 1.100141; 2013, Version 1.100141; 2013 Font Composite : False, False, False, False Font File Name : MyriadPro-Regular.otf, Roboto-Light.ttf, Roboto-Regular.ttf, Roboto-Medium.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 11.00 Page Count : 2 Creator : Adobe Illustrator(R) 17.0 For : Emily Wuest, Bounding Box : -220 -633 1047 -22 Container Version : 9 Creator Version : 18EXIF Metadata provided by EXIF.tools