Impex Fitness Md Pwr20 Owners Manual PARTS LIST
Impex-Fitness-Marcy-Md-Pwr-20-Users-Manual-341434 impex-fitness-marcy-md-pwr-20-users-manual-341434
Impex-Fitness-Md-Pwr20-Owner-S-Manual impex-fitness-md-pwr20-owner-s-manual
MD-PWR-20 to the manual 0f8dbcab-fd7c-484d-a6c7-27255c17373d
2015-06-15
: Impex-Fitness Impex-Fitness-Md-Pwr20-Owners-Manual-746571 impex-fitness-md-pwr20-owners-manual-746571 impex-fitness pdf
Open the PDF directly: View PDF
Page Count: 19
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- HARDWARE PACK……….....…....................................................................... 4
- ASSEMBLY INSTRUCTIONS........................................................................... 6
- EXPLODED DIAGRAM.........................................................................………. 16
- PARTS LIST………………………………………………………………………….. 17
- WARRANTY.................................................................................................… 18
- ORDERING PARTS......................................................................................... 18
- HARDWARE PACK
- ASSEMBLY INSTRUCTION
- Note: Do not tighten the Nuts and Bolts until instructed to do so.
- Attach an Upright Beam (#3) onto a Floor Stabilizer (#1). Secure it with two M10 x 2 ¾” Carriage Bolts (#70), two Ø ¾” Washers (#84), and two M10 Aircraft Nuts (#86).
- Attach the top of Left Support (#4) to the Upright Beam (#3). Secure it with two M10 x 5/8” Allen Bolts (#80) and two Ø ¾” Washers (#84). Attach the Left Support onto the Floor Stabilizer.
- Repeat Procedure B & C to install the other side.
- Attach each end of the Rear Stabilizer (#7) to the bottom of Left & Right Support. Align the holes. Secure each end of Rear Stabilizer, Support, and Floor Stabilizer together with two M10 x 3 ¾” Carriage Bolts (#68), two Ø ¾” Washers (#84), and two M10 A
- Attach the Left & Right Safety Catch (#11 & #12), Left & Right Bar Catch (#13 & #14) onto the two Upright Beams.
- PARTS LIST
- KEY NO. DESCRIPTION Q’ty