Impex Fitness Mss 1280 Users Manual PARTS LIST
Impex-Fitness-Mss-1280-Owners-Manual-746674 impex-fitness-mss-1280-owners-manual-746674
Impex-Fitness-Mss-1280-Owner-S-Manual impex-fitness-mss-1280-owner-s-manual
MSS-1280 to the manual f7126cf8-96a9-46f3-90da-e5062aaa03a1
2015-01-24
: Impex-Fitness Impex-Fitness-Mss-1280-Users-Manual-341424 impex-fitness-mss-1280-users-manual-341424 impex-fitness pdf
Open the PDF directly: View PDF
Page Count: 27
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- SMITH MACHINE HARDWARE PACK……….....….......................................... 4
- SMITH MACHINE ASSEMBLY INSTRUCTIONS...............................................6
- SMITH MACHINE EXPLODED DIAGRAM........................................................15
- SMITH MACHINE PARTS LIST…………………………………………………… 16
- BENCH HARDWARE PACK……….....…..................................................…….17
- BENCH ASSEMBLY INSTRUCTIONS......................................................…….19
- BENCH EXPLODED DIAGRAM...............................................................……. 24
- BENCH PARTS LIST……………………………………………………………….. 25
- WARRANTY.................................................................................................… 26
- ORDERING PARTS......................................................................................... 26
- CAGE MACHINE HARDWARE PACK
- SMITH MACHINE ASSEMBLY INSTRUCTION
- Note: Do not tighten the Nuts and Bolts until instructed to do so.
- Connect the two Base Frames (#3) by the Cross Brace (#7). Secure each end of the Cross Brace to each Base Frame with four M10 x 2 3/8” Carriage Bolts (#50), one 4 ¾” x 3 ¼” Bracket (#22), four Ø ¾” Washers (#57), and four M10 Aircraft Nuts (#58).
- Attach the Left Rear Support (#5) onto the left Base Frame. Secure it with two M10 x 3 ½” Allen Bolts (#55), four Ø ¾” Washers (#57), and two M10 Aircraft Nuts (#58). Repeat the same step to install the Right Rear Support (#6) onto the other Base Frame.
- STEP 6 (See Diagram 6)
- SMITH MACHINE EXPLODED DIAGRAM
- SMITH MACHINE PART LIST
- KEY NO. DESCRIPTION Q’ty
- BENCH PARTS LIST
- KEY NO. DESCRIPTION Q’ty