InBody BS-RFIDREADER Low Power Communication Device User Manual RFID Reader 120330 REV2

Download:
Mirror Download [FCC.gov]
Document ID	1666896
Application ID	eTB7dR3iwhlk5KVJJ6qYNw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.24kB (327940 bits)
Date Submitted	2012-04-02 00:00:00
Date Available	2012-04-02 00:00:00
Creation Date	2012-04-02 19:23:46
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2012-04-02 19:24:22
Document Title	(RFID_Reader_????????????????_120330_REV2)
Document Creator	PDFCreator Version 1.2.3
Document Author:	schong

BS-RFID Reader
User’s Manual
Biospace Co. Ltd
1. Summary
1.1 Summary
⇒ This is a Read/Write functional short-range wireless-aware device used to Tag the ID of each user, including
their name, date of birth, gender and etc.
The Tag may be a card or a coin provided to each individual for convenient user management.

1.2 Specification
• Frequency : 13.560 5MHz
• RF Data Rate : ISO 15693 26.6kbps
ISO 14443A 105.9kbps
• Read Range : Maximum 50mm
• Antenna : 50ohm Internal Antenna
• Interface : USB
• Data Rate : Serial 9600 to 115200 baud rate
• Power : DC 5V(PC USB powered)
• Dimensions : 52mm(H) x 82mm(W) x 17mm(L)
• Weight : 150g
• RF Output Power (Field Strength) : Maximum
• No of Channel : Single
• Modulation method : ASK
47.544 mV/m @ 10 m
1.3 Item
• Corporation : Biospace Co. Ltd
• Name: RFID/USN Mobile Reader
• Model Name : BS-RFID Reader
• Manufacturer : Biospace Co. Ltd
• Manufactured in Korea
• Serial Number : RFID3-IO2B13.5605TRA1D1
2. Operation Manual
2.1 Registering User
① Enter the user’s name in the search panel and click Search.
⇒ Click Search bar after entering the “user’s name” in LB Search bar on the right of the screen.
The user’s data will show in the “Member Management” window on the left of the screen.
② Place the Card on the RFID Card Reader and click “Register card”.
⇒ After 3, 0.5 second beeps, a screen pop up will indicate, “Registration Complete”.
Card that has completed registration should be given to the user.
2.2 Checking User’s Measurement Data
① After User Measurement is complete, place the Card on the reader and click on the “Read the Card” button.
⇒ After User Measurement is complete, place the Card on the reader and click on the “Read the Card” button.
The User’s basic data will be provided on the “Member Management:” screen.
② Click on the “Basic Physical” button to the right of the Lookin’Body window.
⇒ The Measurement data will be provided.
FFC Information
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try correct the interference
by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
Warning
Changes or modification not expressly approved by the manufacturer could void the user’s authority to operate
the equipment.
ⓒ 1996~ Biospace Co., Ltd. All rights reserved.
Notice
This user’s manual cannot be copied, translated or transformed into different media without a prior written
consent from Biospace Co., Ltd, according to the copyright laws. This user’s manual and product pertinent to this
manual may have misprints or technical flaws, which can be modified without prior notice to the readers.
Biospace is not liable for any damage caused by a failure to meet the requirements in this user’s manual.
Biospace Co., Ltd. [Head office]
518-10 Dogok 2- dong, Gangnam-gu, Seoul 135-854 KOREA
TEL : 82-2-501-3939
FAX : 82-2-501-3978
Homepage : http://www.e-inbody.com
E-mail : info @inbody.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:04:02 19:23:46+09:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2012:04:02 19:24:22+09:00
Metadata Date                   : 2012:04:02 19:24:22+09:00
Format                          : application/pdf
Description                     : 
Creator                         : schong
Title                           : (RFID_Reader_????????????????_120330_REV2)
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:5152df7c-aef5-4aa4-8b2f-9cdf94272297
Instance ID                     : uuid:f818a138-74af-407f-8a09-9a5a07b225f2
Page Count                      : 6
Subject                         : 
Author                          : schong

EXIF Metadata provided by EXIF.tools