Infiniti Car Speaker 5 1 Users Manual Kappa Perfect 5.1/6.1 OM
Infinity KAPPA PERFECT 5.1 Car Audio Component Owner’s Manual kappaperfect51and61 OM Troubleshoot Infinity KAPPA PERFECT 5.1 Car Audio Component |
5.1 to the manual 7de1f2cf-f745-4c8c-8a0c-c95116919305
2015-02-05
: Infiniti Infiniti-Car-Speaker-5-1-Users-Manual-407616 infiniti-car-speaker-5-1-users-manual-407616 infiniti pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
kappa series perfect5.1 perfect6.1 Thank you for purchasing an Infinity Kappa Perfect component system. Kappa Perfect components have been engineered to provide the most accurate sonic reproduction possible. Over the years, we at Infinity have listened to hundreds of automotive speakers and we think these are among the finest. We hope you agree. This manual includes information that will make your installation as simple and trouble-free as possible. It also provides detailed technical information that will help an experienced installer optimize speaker placement and crossover adjustment. Please study this manual before you begin your installation. Remember to send in your warranty registration card, and keep your sales receipt somewhere safe in case you need warranty service. instructions IMPORTANT SPEAKER PLACEMENT Installation of automotive stereo components can require extensive experience performing a variety of mechanical and electrical procedures. Although these instructions explain how to install a Kappa Perfect component system in a general sense, they do not show the exact installation method for your particular car. If you feel you may not have the necessary tools or experience, ask your authorized Infinity car audio dealer about professional installation options. Figures 1– 4 show possible speaker placements in the order of most desirable to least desirable. Kick-panel mounting will provide the best staging and imaging in most vehicles. TWEETER INSTALLATION – + 1 2 TWEETER in high/forward location on door WARNING Playing loud music in your automobile can permanently damage your hearing as well as hinder your ability to hear traffic. We recommend listening at low volume while driving. Infinity accepts no liability for hearing loss, bodily injury or property damage resulting from use or misuse of this product. A NOTE ABOUT SYSTEM PERFORMANCE For the best performance possible, the Kappa Perfect components should be used with a two-channel amplifier with output power of at least 50W RMS per channel. The passive crossover contains impedancecompensating circuitry and has been computer-optimized for the flattest possible frequency response with the tweeter flushmounted, on-axis with the listener. The combined responses of the speakers and passive crossover constitute a 4th-order Linquitz-Riley acoustic alignment and cannot be duplicated with any electronic crossover currently available for car audio use. Consequently, bi-amping a Perfect component system with an electronic crossover is not recommended. -2- TWEETER and WOOFER on kick panel Figure 5. Surface-mounting the tweeter WOOFER in factorydoor location Figure 1. Fig 1 Mounting the woofer and tweeter in the kick panels Figure 3. Fig 3 Mounting the woofer and tweeter in the doors blk red TWEETER on dash 1 2 TWEETER on kick panel WOOFER in factorydoor location WOOFER in factorydoor location Fig 2 Figure 2. Mounting the woofer in the door and the tweeter in the kick panel Figure 6. Flush-mounting the tweeter Fig 4 Figure 4. Mounting the woofer in the door and the tweeter in the dash – + WOOFER INSTALLATION ELECTRICAL CONNECTIONS AND CROSSOVER ADJUSTMENTS DECLARATION OF CONFORMITY Tweeter level 4dB Tweeter level +5dB Figure 7. Mounting the P5.1 or P6.1 woofer where there is no factory speaker location. To mount the P5.1 in factory locations, omit the grille and grille tray. Tweeter level 0dB (default) J1 J2 J1 J2 J1 J2 We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir France J1 declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards: EN 50081-1:1992 EN 50082-1:1997 Lutz Uphoff Harman Consumer International Chateau-du-Loir, France 4/01 ¤ TWEETER LEVEL —4dB 0dB +5dB J1 Figure 8. Mounting the P6.1 woofer in standard 5-1/4" holes (in many Japanese and American automobiles) J1 J2 J2 KPX00 ¤ + To amplifier speaker output + To woofer + To tweeter Figure 11. Adjust the crossover using the jumpers provided Figure 10. Connecting the speakers and the amplifier to the crossover Figure 9. Mounting the P6.1 woofer in 165mm holes (in many European and American automobiles) -3- SPECIFICATIONS System Frequency Response: Power Handling: Nominal Impedance: Sensitivity: Crossover Frequency: SYSTEM RESPONSE CURVES P6.1 75Hz – 23kHz, ±3dB 100W RMS, 400W Peak 4 Ohms 90dB 3.5kHz, 24dB/oct. Linquitz-Riley Acoustic Thiele and Small Parameters P6.1 Woofer Revc: 3.45 Levc: 0.37 Sd: 0.0113 BL: 6.37 Vas: 11.43 Cms: 630.36 Mms: 18.94 Mmd: 18.25 Fs: 46.05 Qms: 3.44 Qes: 0.465 Qts: 0.41 Top-Plate Thickness: 9/32" (7.115mm) Voice-Coil Length: 9/16" (14mm) Voice-Coil Diameter: 1-1/2" (38.1mm) Xmax: 1/8" (3.44mm) Mounting Depth: 2-3/4" (70mm) Cut-Out Diameter: 5-1/16" (129mm) P5.1 80Hz – 23kHz, ±3dB 100W RMS, 400W Peak 4 Ohms 89dB 3.5kHz, 24dB/oct. Linquitz-Riley Acoustic P5.1 Woofer 3.38 0.21 0.0100 3.94 9.29 654.21 10.41 9.84 60.98 3.60 0.87 0.701 9/32" (7.115mm) 9/16" (14mm) 1-1/4" (31.75mm) 1/8" (3.44mm) 2-3/8" (61mm) 4-5/8" (118mm) Perfect5.1 System Frequency Response Perfect6.1 System Frequency Response Tweeter 3.31 0.02 0.0005 1.99 0.0016 44 0.3064 0.3 1370.65 5.4 2.19 1.56 N/A N/A 1" (25.4mm) N/A 1" (25.4mm) 1-3/4" (45mm) Sound Pressure Level dB spl Deg dB spl < Magnitude > Sound Pressure Level < Phase > Deg 180 100 100 135 90 135 90 90 80 90 80 45 70 45 70 0 60 0 60 -45 50 -45 50 -90 40 -90 40 -135 30 -135 -180 20 110 C 30 20 Fr e que nc y 100 500 1k Hz 5k 10k 20k C 20 Frequency 100 Kappa Perfect6.1 (flat setting) Kappa Perfect6.1 (+5dB setting) Kappa Perfect6.1 (–4dB setting) Ohms < Magnitude > 500 1k Hz 5k 10k -180 20k Kappa Perfect6.1 (flat setting) Kappa Perfect6.1 (+5dB setting) Kappa Perfect6.1 (–4dB setting) Perfect5.1 System Impedance Perfect6.1 System Impedance 30.0 180 Impedance Measurement < Phase > Deg 180 30.0 Ohms < Magnitude > Impedance Measurement < Phase > Deg 10.0 10.0 90 45 45 3.0 0 3.0 0 -45 -45 1.0 -90 1.0 -90 -135 -135 0.3 Infinity Systems, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA (800) 553-3332 • FAX (516) 682-3523 • www.infinitysystems.com © 2001 Infinity Systems, Inc. • Part No.: KAP5.1/6.1OM4/01 • Printed 4/01 90 C 20 Frequency 100 500 1k Hz 5k 10k 20k -180 180 135 135 0.3 C 20 Frequency 100 500 1k Hz 5k 10k 20k -180
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:04:25 12:24:01 Producer : Acrobat Distiller 4.0 for Macintosh Author : Title : Kappa Perfect 5.1/6.1 OM Creator : QuarkXPress(tm) 4.11 Modify Date : 2001:04:25 12:24:21-04:00 Page Count : 4EXIF Metadata provided by EXIF.tools