Ingenico I7770RBBT2 Point of Sale, Base Station User Manual 556713

Download:
Mirror Download [FCC.gov]
Document ID	556713
Application ID	54ViV6OEONg7JnllysmSgA==
Document Description	Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	118.62kB (1482753 bits)
Date Submitted	2005-06-29 00:00:00
Date Available	2005-06-17 00:00:00
Creation Date	2005-06-29 09:51:53
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-06-29 09:51:53
Document Title	Microsoft Word - 556713.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

• DIAL LINE and PHONE CONNECTIONS
The ports marked EXT LINE and
are identical.
Use either one of these ports to connect the i7770
modem to the telephone line: plug the one end of a
telephone cable into the port, and connect the other end
of the cable to a wall telephone jack.
Use the remaining port to connect the phone, fax or other
device that will share the same phone line with the
i7770. Plug one end of a telephone cable into the i7770
port (EXT LINE or
), and plug the other end of the
cable in the device.
• PERIPHERAL/HOST CONNECTION
Unplug the i7770 radio base. Connect the serial cable to
the base port marked COM2 or COM1/3. Plug the other
end of the serial cable to the device (PC, check reader
etc.). For detailed instructions, ask the equipment
supplier.
• POWER CONNECTION
Plug the power adapter radial jack into the i7770 base
. The green light on the front right
port marked
hand side of the base indicates the power is on.
Attach the cable securing plate and fix it with a screw.
The symbol
in the upper left hand corner of the screen
indicates that the hand held terminal is assigned to its base
and it is in the range (the search phase typically lasts less
than 10s).
The message „ -RANGE- „ appears when the Bluetooth
radio link is not available:
• The hand held terminal is out of range.
• The terminal is scanning for the base while initiating
communication.
• The hand held terminal is configured with the wrong
base serial number. Go to the SYSTEM MENU, select
the “RADIO CONFIG” and run “MOD RADIO
PARA”.
• The radio base is not powered up.
The message „-BUSY-„ appears when the hand held
terminal tries to connect to a base while it is communicating
with another terminal. Wait until the base becomes available.
The message FULL appears when the maximum number
of terminals configured for a base is exceeded.
Remove the extra terminals from the network, power off the
radio base and turn it back on to reinitialize.
5.
The i7770 must be off for all cleaning operations. Do not
clean the i7770 with water but with a dry or only slightly
damp cloth. Do not use solvent, detergent or abrasive
products. If the terminal has battery recharging or
communication problems, clean the golden contact under the
terminal with a damp cloth. Do not scratch or scrape the
surface of the contacts.
3.5. Changing the printer paper:
When the coloured stripe on the paper appears, replace
the paper: Remove the i7770 from the base and wait till it
turns off, do not touch the printer parts. Be aware of the
sharp paper cutter.
1. Push the button on the paper compartment cover
toward the back and lift the cover.
2. Remove the empty paper roll and insert the new roll
ensuring
the
paper
is
protruding
from
UNDERNEATH the roll.
Cleaning procedure:
6.
Technical specifications:
The i7770 uses a low power (20dBm, ≤100mW) Bluetooth
technology with frequency hopping in the 2.45Ghz ISM
band. The i7770 range is around 100 m (open field).
6.1. Power supply:
The power adapter is mainly used for charging the internal
battery.
• INPUT ................AC 120V 60Hz
• OUTPUT . DC 18V 0.9A 16.2VA
6.2. Thermal Paper Specification:
•
•
3. To close the cover, press it until it snaps. Press the
“Paper feed” key to verify that paper feeds properly.
4.
Normal Operation:
To extend the battery life, the i7770 hand held terminal
goes into a stand-by mode when it is not on its base. To
quickly power on the hand held terminal:
• Press the green  key, or
• Place the hand held briefly on the base.
•
•
•
•
•
•
•
Single ply thermal sensitive – POS or facsimile grade.
Basis Weight: (lb/rm 17 ins. X 22 ins. - 500) -- 14.5 ± 5%
(GSM) -- 55 ± 5%
Caliper .......................... 2.4 ± 0.2 Mils or 60 ± 5 Microns
Brightness......................................................... Min. 85%
Smoothness (Bekk Minimum) ..................................300 s
Roll Width ................. 2.28 ± 0.040 in (58 mm ± 1.0 mm)
Roll Diameter ........................ 1.97 in (50 mm) maximum
Roll Core ID ........................... 0.500 in (13 mm) nominal
Roll Core OD.......................... 0.625 in (16 mm) nominal
Recommended brands:
KANZAN .................... KF50
JUJO....................AF50KS-E
KOEHLER..........KT55HS01
MITSUBISHI..............P6402
Thermal paper should NOT be exposed to vinyl, plastics, adhesives,
shrink-wraps, wet-toner copies or certain carbon papers, office light
UV light, high humidity and temperature (above 65%, 25°C or 77°F)
for long periods of time.
7. If you experience problems:
Call one of the customer service centers listed below:
In Canada:
TotalCARE
6520 Gottardo Court
Mississauga, Ontario
L5T 2A2
1-888-900-8221 (905-795-8221)
In the USA:
Ingenico Inc.
TotalCARE
1003 Mansell Road
Atlanta, GA 30076
1-800-435-3014 (770-594-6000)
US Federal Communications Commission (FCC) Warnings:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the installation guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Warning: Changes or modifications not expressly approved by Ingenico could void the user’s authority to operate the
equipment.
Canadian Department of Communications (DOC) Warnings:
This digital apparatus does not exceed the Class B limits for radio noise emissions from the digital apparatus as set out
in the radio interference regulations of the Canadian Department of Communications.
RF Exposure Warning:
To comply with RF exposure requirements the base unit must be installed and operated with a separation distance of 20
cm or more between the device and all person's body (excluding extremities of hands, wrist and feet). The terminal unit
has been tested and meets RF exposure guidelines for hand held operation pursuant to FCC OET Bulletin 65
Supplement C ed. 01-01, IEEE 1528/D1.2 (2003) and Industry Canada RSS-102 (1999). The base and terminal units
must not be co-located or operated in conjunction with any other antenna or transmitter.
For body worn operation, this device has been tested and meets FCC RF exposure guidelines when used with
accessories that contain no metal and that position the device a minimum of 10 mm from the body. Use of other
accessories may not ensure compliance with FCC RF exposure guidelines.
ACTA Revision Part 68
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). On the bottom of this equipment is a label that contains, among other information, a
product identifier in the format US: INBMM01Bi7770. If requested, this number must be provided to the telephone
company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local telephone company.
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
INGENICO 7770 or i7770 does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
Industry Canada Warnings:
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration
was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met.
It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is <0.1>. The REN assigned to each
terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any combination of devices subject only to the requirement
that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
NOTICE: To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Ingenico 7770
Installation Guide
Ingenico Inc.
1003 Mansell Road, Atlanta, GA 30076
Tel: (770) 594 – 6000
Fax: (770) 594 – 6003
www.ingenico-us.com
Ingenico Canada Ltd.
79 Torbarrie Road, Toronto, Ontario, Canada, M3L 1G5
Tel: (416) 245 – 6700
Fax: (416) 245 – 6701
www.ingenico-ca.com
DIV750003F
1.
Ingenico 7770 description:
1.3. Magnetic Stripe Card Reader:
The i7770 is a portable (Bluetooth technology) point of
sale electronic payment terminal designed to process
debit, credit and smart card purchases.
The i7770 features an easy loading high-speed printer, a
graphic display, back lit keyboard and easily accessible
battery (for fast installation and replacement) with
intelligent management of battery charging. The i7770 is
environmentally friendly with light packaging, recyclable
plastic and non-polluting batteries.
The i7770 communicates with the acquirer through its
base via the telephone network. The hand held terminal
and the base communicate through the Bluetooth radio
link, or via direct contact. A network can be set up, with
one base managing up to 7 terminals at the same time.
The base allows connection to various peripherals
through its RS-232 ports.
The i7770 features a secure, multi-application operating
system (UNICAPTTM technology) permitting several
applications to run independently on the same terminal.
Navigation keys
Paper
Feed Key
Paper
Compartment
Magnetic
Stripe Card
Reader
i7770 features a bi-directional reader capable of reading
tracks 1 and 2 simultaneously. The reader is located on the
right-hand side of the i7770. The card can be swiped from
the bottom to the top, or from the top to the bottom. The
magnetic stripe on the card has to face down and point
toward the i7770. The card has to be swiped at uniform speed
and pressure, ensuring that the card remains in contact with
the bottom of the track throughout the entire swipe action.
1.4. Smart Card Reader:
Insert the smart card horizontally into the slot on the front of
the i7770, the microchip facing up, and leave it in the reader
throughout the transaction.
The i7770 has EMV level 1&2 approvals and complies with
the ISO 7816, Sync and Async T=1 & T=0.
1.5. Printer:
The i7770 integrates a quiet, high speed, “easy-load” style
thermal printer with graphics capability.
1.6. Battery:
Rechargeable and easily replaceable intelligent Ni-MH or LiIon battery pack.
1.7. SAM Connectors:
Three SAM card connectors are located on the bottom of the
i7770. The SAM (Secure Access Module) supports
Base Contacts
The i7770 communicates with its base via Bluetooth radio
link, or through the contacts (connect mode) which is useful
when loading large amounts of data, or when a Bluetooth
link is unavailable.
The base provides recharging for the battery pack, and
includes the communication ports:
- COM2 and COM1/3:
Two RS-232 serial communication links for customer
applications download and for the communication with
external peripherals (speed 300 to 115200 bps). The
COM1/3 provides power for external devices.
- DIAL LINE and TELEPHONE Ports:
A V34 / 33600 bps (asynch. and synchr.) modem that
supports fast connect and busy line detection.
The telephone port allows sharing of the telephone line with
other devices such as a fax machine or telephone.
CANCEL
Key
ENTER Key
Green Power
Indicator Light
1.1. Display:
A 4 line x 16 character LCD graphic display, with a
back light.
1.2. Keypad:
18 keys, with a back light. The special function keys are:
• Programmable function keys ,  and 
for navigation and access to various i7770 functions
and the system and application menus.
• Paper Feed key is used for a printer paper feed
(20mm).
• The green  key confirms the data entered or
displayed. It also powers on the i7770.
• The red  key cancels the current function and
returns the terminal to the idle state.
• The yellow  key corrects invalid data entry.
• The blue  key is used to access the terminal
administration function menu.
Installation procedure:
Place the i7770 base on a clear, flat surface near an electrical
and telephone sockets. The ideal location is in the center of
the zone to be covered with a large open area around. The
antenna is inside, on the left side of the base.
The i7770 hand held and the base must be protected from
high temperature, vibrations, dust, dampness and
electromagnetic radiation (computer screen, microwave
oven, anti-theft barrier etc.). Equipment such as cordless and
cellular phones can emit harmonics that could disturb the
terminal at 2.45 GHz.
Do not place the base near a great vertical metal plane (doors
of refrigerator, large home appliances, vending machines).
Ensure the base or the terminal is more than 3 m (around 10
feet) from any microwave oven in use.
Do not place the hand held terminal on a metal surface.
Do not put your hand under the printer during
communication, as the range is greatly reduced.
If there are several radio bases installed, position them at
least 2 meters (around 6.5 feet) from each other.
2.
Ingenico 7770 Packaging Content:
1.
2.
3.
4.
5.
6.
7.
8.
The i7770 hand held terminal.
The i7770 battery pack.
Thermal printer paper, one roll.
The i7770 base (optional, radio or charging).
The power supply (optional, with the base only).
The phone cable (optional, with the radio base only).
The cable securing plate and a screw (optional, with the
base only).
This installation guide.
Always charge the battery at the room temperature.
Do not place the i7770 terminal back on its base after each
transaction. Frequent and short battery charging may damage
the battery and reduce its lifetime.
Every one to two months allow the i7770 to show the low
battery warning and shut down. Then charge the battery to
its full capacity. This will prolong the battery life.
Batteries that sit idle for extended periods of time without
charging, will gradually self-discharge.
3.2. Installing the Battery:
Leave the i7770 handheld terminal off its base and wait until
it turns itself off before handling the battery pack.
Hold the battery with the connectors facing downwards, do
not touch the contacts on the battery or the i7770.
Ensure that the terminal is seated securely on the base.
Operating temperature ................................+5°C to +40°C
Humidity ........................ 20% to 90% without condensation
Storage temperature ....................................-10°C to +60°C
smart card chips necessary for applications such as
loyalty.
3.1. Battery Set up and Charging:
1.8. The Base
CORR Key
Smart Card
Reader
3.
The i7770 is supplied with a removable rechargeable Ni-MH
or Li-Ion battery. Only use the battery pack supplied with
your terminal.
The i7770 battery is built with circuitry for intelligent
battery management. To charge the battery, place the handheld on the i7770 base. Ensure the base is powered up. Note
that the battery will recharge only if necessary. Furthermore,
the battery has internal temperature control so it never
exceeds 50°C (122°F).
Ensure that the terminal is seated securely on the base.
Use the power adapter supplied with the i7770. Many
adapters can appear similar and will plug into the i7770 base
but will not work properly causing erratic behavior, poor
charging or even damage to the unit.
The i7770 with a fully charged battery can execute up to 200
transactions (depending on the ticket size and transaction
duration).
The i7770 displays the battery status:
1 bar represents 25 % of full capacity,
2 bars represent 50 % of full capacity,
3 bars represent 75 % of full capacity,
4 bars represent 100 % of full capacity.
Charge the battery for 3 hours when it is used the first time.
Full charging time after the first time is 2 hours. A new
battery will benefit from an initial "conditioning". The first 3
times the battery is used, allow the battery to fully discharge
and then charge it to its full capacity.
Insert the two plastic teeth in the gaps on the i7770 case,
place the battery in the cavity and press the handle until a
click is heard.
3.3. SAM Installation:
Wait till the i7770 turns off and remove its battery. Unlock
the SAM connector by sliding the metallic latch in the
direction of the OPEN arrow. Lift the SAM cover upward
and insert the chip as shown on the picture below. Swing the
cover down and slide the latch into locked position (the
LOCK arrow). Put the battery on the i7770.
3.4. Connections:
Turn the i7770 radio base off when connecting peripherals.
The power supply must be connected last, only after all the
other connections are made.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2005:06:29 09:51:53-04:00
Modify Date                     : 2005:06:29 09:51:53-04:00
Page Count                      : 2
Creation Date                   : 2005:06:29 13:51:53Z
Mod Date                        : 2005:06:29 13:51:53Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Administrator
Metadata Date                   : 2005:06:29 13:51:53Z
Creator                         : Administrator
Title                           : Microsoft Word - 556713.DOC

EXIF Metadata provided by EXIF.tools