Ingenico IPP2XX Payment Terminal User Manual

INGENICO Payment Terminal Manual

a href="https://usermanual.wiki/Ingenico" itemprop="url"> Ingenico >

Manual

IPP200 Series INSTALLATION GUIDE 296108772AD 900001778 R11 000 06 /0111 INGENICO – 192 avenue Charles de Gaulle – 92200 Neuilly sur Seine – France Copyright © 2011 Ingenico Tél. 33(0)1 46 25 82 00 - Fax 33 (0)1 47 72 56 95 Safety instructions: Lithium battery: IPP200 Series device is equipped with a lithium battery non-accessible to the user. Only a qualified operator is authorized to open the unit and replace this component. VORSICHT: IPP2 ist mit einer Lithium-Batterie, die nicht zugänglich ist für den Benutzer ausgestattet. Der Wiedereinbau der Batterien muß von qualifiziertem Personal bewirkt werden. Beachten Sie die Polarität für die Batterie Lithium. Eine fehlerhafte Installation der Batterie kann eine Explosion führen. Entsorgen Sie die Batterien entsprechend den Anweisungen des Herstellers. CAUTION: For Switzerland, Annex 4.10 of SR 814.013 applies for batteries Power supply network: To cut off the IPP200 Series power, disconnect the power adapter from the power supply network. You should provide a socket for the incoming power supply satisfying the following conditions:  Socket near the device and easy to access;  Socket in line with the standards and regulations in force in the country of use; The protection in the installation must be 20A for pluggable equipment type A. FCC standard compliance marking certifies that the product stipulated below: IPP2X0-01TXXXXX conforms to the following harmonized standards : – part 15 subpart B of the FCC rules This class (B) digital apparatus complies with Canadian ICES-003. FCC: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help CAUTION: The user is cautioned that any changes or modifications not approved by INGENICO could void user’s authority to operate the equipment
Download:
Mirror Download [FCC.gov]
Document ID1414912
Application IDnGXLCpv6lrd2vgfegWVq0w==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize47.97kB (599686 bits)
Date Submitted2011-02-09 00:00:00
Date Available2011-02-09 00:00:00
Creation Date2011-11-01 11:14:02
Producing SoftwareGPL Ghostscript 8.54
Document Lastmod2011-11-01 11:14:02
Document Title900001778 R11 000 06_296108772AD_installation guide IPP2
Document CreatorPDFCreator Version 0.9.3
Document Author: ofabregoule
FCC ID Filing: XKB-IPP2XX

Navigation menu