InnoSenT IVS-234 Radar Sensor 24 GHz User Manual 180201 IVS 234 indd

Download:
Mirror Download [FCC.gov]
Document ID	3805981
Application ID	ONJSIbYTk+FFf8htRp7PaA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	198.65kB (2483179 bits)
Date Submitted	2018-04-04 00:00:00
Date Available	2018-04-04 00:00:00
Creation Date	2018-03-27 07:56:09
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-03-27 08:49:43
Document Title	180201_User Manual_IVS-234.indd
Document Creator	Adobe InDesign CC 2017 (Windows)

InnoSenT sets standards – worldwide
User Manual IVS-234
Version 6.3 - 01.02.2018
Product Family
Applications
Additional Information
PLL stabilized K-Band VCO Transceiver
True Speed over Ground measurement
Movement
Velocity
Direction
Presence
Distance
Angle
Customer specific product for DEUTA-WERKE GmbH
DEUTA-WERKE GmbH has to be informed about all technical changes.
Features:
»» K-Band Transceiver
»» CW (continuous wave) mode
»» stereo (dual channel) operation for direction-of-motion
identification
»» integrated PLL circuit for high frequency stability
»» programmable transmitter frequency
The IVS-234 is a MMIC based CW K-Band
Transceiver with an integrated PLL-circuit
for high frequency stability.
Certificates
InnoSenT GmbH has established and applies a quality system for: Development,
production and sales of radar sensors for
industrial and automotive sensors.
The PLL-circuit enables the customer to
program its own transmit frequencies
directly via SPI-Bus.
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH
and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 1
This product is compliant to the restriction of hazardous substances
(RoHS - European Union directive 2011/65/EU)
Version 6.3		
Description
USER MANUAL IVS-234
»» balanced mixer with reduced common mode noise for
both channels (DOP and QDOP)
InnoSenT sets standards – worldwide
Electrical Characteristics
Parameter
Symbol
Min.
Typ.
Max.
Units
transmit frequencies
F1
24.008
temperature drift (frequency)
|Δf|
10
output power (EIRP)
Pout
20
dBm
bandwidth
10 - 1M
Hz
gain
46
dB
Comment
Oscillator
24.243
GHz
30
kHz/°K
can be adjusted by user(1)
Receiver (compare with amplifier circuit on page 4)
IF-amplifier
I/Q balance
amplitude
dB
phase
70
110
°
reject criteria
v_offsetI(DOP)
-500
500
mV
@ InnoSenT test setup(2)
v_offsetQ(QDOP)
-500
500
mV
@ InnoSenT test setup(2)
SI(DOP)
45
64
83
mV
@ InnoSenT test setup(2)
SQ(QDOP)
45
64
83
mV
@ InnoSenT test setup(2)
RI(DOP)
10
18
mVRMS
@ InnoSenT test setup(2)
RQ(QDOP)
10
18
mVRMS
@ InnoSenT test setup(2)
offset
reject criteria offset
signal level
reject criteria signal level
(1)
(2)
The user is responsible for the compliance of the transmit frequency!
measured during end of line test according to InnoSenT instruction manual AA 7-7-29
Power supply
supply voltage
supply current
Vcc
4.75
5.25
VSS
-5.25
-4.75
ICC
150
200
mA
ISS
20
50
mA
refractory period (1)
Antenna pattern (compare with antenna plot on page 4)
full beamwidth @ -3dB
side-lobe suppression
11
13
15
°
vertical
11
13
15
°
horizontal
12
dB
vertical
12
dB
time between shut down and restart
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH
and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 2
(1)
horizontal
Version 6.3		
reject criteria noise level
USER MANUAL IVS-234
noise level
InnoSenT sets standards – worldwide
Electrical Characteristics
Parameter
Symbol
Min.
operating temperature
TOP
storage temperature
TSTG
Typ.
Max.
Units
-40
+80
°C
-40
+85
°C
Comment
Environment
height
length
width
outline dimensions
10.5 (11.8)
70.0
65.8
mm
tolerances according to
DIN1687-4
Bandwidth
46dB
10Hz - 1MHz
Mechanical Outlines
All dimensions in mm / all tolerances according DIN1687-4
front
back
Version 6.3		
Gain
USER MANUAL IVS-234
Bandwidth and Gain simulation
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH
and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 3
pin 1
InnoSenT sets standards – worldwide
antenna
front
vertical
Tx - antenna pattern
horizontal
-5
power [dB]
-10
-15
Horizontal
Vertical
-30
-60
-50
-40
-30
-20
-10
10
20
30
40
50
60
angle [°]
Parameter
full beam width @ -3dB
Min.
Typ.
Max.
Units
horizontal
11
13
15
°
vertical
11
13
15
°
horizontal
12
dB
vertical
12
dB
Comment
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH
and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 4
side-lobe suppression
Symbol
Version 6.3		
-25
USER MANUAL IVS-234
-20
InnoSenT sets standards – worldwide
Interface
The sensor provides a 6-PIN Berg connector and 2.54mm grid pads for programming
Pin #
In / Out
Comment
Vcc
input
positive supply voltage for VCO
Vss
input
negative supply voltage for VCO, LNA, IF-amplifier
GND
input
analog ground
TUV
output
open collector
DOP
output
I (DOP / -S2-S1)
QDOP
output
Q (QDOP / S2-S1)
NC
SCK
input
programming input1
MISO
in- / output
programming input / output
10
MOSI
input
programming input
11
RES
input
programming input
12
NC
not connected
13
NC
not connected
14
Vtune
output
control output varactor voltage
15
GND
input
analog ground
not connected
Programming according to „AA 8-5-10 Bedienungsanleitung Programmierung IVS-234“
CONFIDENTIAL AND PROPRIETARY
The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH
and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.
Page 5
Version 6.3		
USER MANUAL IVS-234
Description
InnoSenT sets standards – worldwide
Approval
This Data Sheet contains the technical specifications of the described product. Changes of
the specification must be in written form. All previous versions of this Data Sheet are no
longer valid.
The technical specifications of this Data Sheet are approved:
FCC approval
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
DEUTA - WERKE GmbH
Am Rödertor 30
97499 Donnersdorf
GERMANY
Paffrather Straße 140
51465 Bergisch Gladbach
GERMANY
InnoSenT GmbH
Version 6.3		
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter. Cet équipement est
conforme aux limites d’exposition aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas etre
place au meme endroit ou utilise simultanement avec un autre transmetteur ou antenne.
USER MANUAL IVS-234
Warning: Changes or modifications made to this equipment not expressly approved by
InnoSenT GmbH may void the FCC authorization to operate this equipment. Manufacturers
of mobile or fixed devices incorporating IVS-234 modules are authorized to use the FCC
Grants and IC Certificates of the IVS-234 modules for their own final products according to
the conditions referenced in these documents. In this case, the FCC label of the module
shall be visible from the outside, or the host device shall bear a second label stating contains “FCC ID: UXS-IVS-234 “ and contains “IC: 6902A-IVS234”.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
NOTICE: Changes or modifications made to this equipment not expressly approved by
(manufacturer name) may void the FCC authorization to operate this equipment.
Contact Information
InnoSenT GmbH | Am Roedertor 30 | 97499 Donnersdorf | Germany
Phone: +49 (0) 9528-9518-0 | Fax: +49 (0) 9528-9518-99 | E-Mail: info@innosent.de
www.innosent.de
date / signature
Page 6
date / signature

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Language                        : de-DE
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Instance ID                     : uuid:65af12b4-4660-40ae-bb14-726ff2c47afe
Original Document ID            : adobe:docid:indd:500479aa-94e2-11df-9d6a-acb2a204f01e
Document ID                     : xmp.id:dd30c6d9-3a36-2f4b-856e-b485f18fa095
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:100b02c4-c5af-8a4c-b052-58cd6e6b52de
Derived From Document ID        : xmp.did:4ABBA2209F2CE611BD5ED0EF30CA9F64
Derived From Original Document ID: adobe:docid:indd:500479aa-94e2-11df-9d6a-acb2a204f01e
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2018:03:27 07:56:09+02:00
Create Date                     : 2018:03:27 07:56:09+02:00
Modify Date                     : 2018:03:27 08:49:43+02:00
Metadata Date                   : 2018:03:27 08:49:43+02:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Format                          : application/pdf
Title                           : 180201_User Manual_IVS-234.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-3:2002
GTS PDFX Conformance            : PDF/X-3:2002
Page Count                      : 6
Creator                         : Adobe InDesign CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools