Innomdle Lab WB-S50 Sgnl User Manual
Innomdle Lab Co.,Ltd. Sgnl
User Manual
Quick Guide Book
Innomdle Lab
2. Names of components1. Parts 3. Taking o the strap
4. Disconnecting the strap connector
2 21
4
7
3
6
5
* The image and components may look dierent from the actual product.
6. 길이 조절하기
5. Connecting the watch (General watch)
Use Sgnl by binding it to your personal watch.
width width=
8. Wearing the device
Make sure the BCU component is in contact with the wrist.
Strap connector
1EA (Original)
1. Locate the groove on the strap. (Outward from the BCU 4 )
2. Place your finger inside the groove and pull upwards to release.
22mm
5-1. Connecting the watch (Apple watch)
Watch connector
Size : 18/20/22/24mm * 2EA
(22mm original connector)
Apple watch connector
Sgnl WB-S50 Size : 38mm, 42mm
Adjustable length clip
Additional 4EA
Watch spring bar pin
Size : 18/20/22/24mm * 2EA
(22mm original size)
Bolt
Additional 2EA
Screwdriver
1EA
Charger
1EA
Volume down (-)
Charging port
Volume up (+)
LED
Button
Microphone
BCU (Body Conduction Unit)
1. Pull the Spring bar pin E to the side to disconnect the Strap connector H .
2. The Spring bar pin E will disconnect the closest part first.
* Refer to Step 6. Length Adjustment if the Strap Connector H will be used as initially packaged.
1. Make sure the Button 3 and LED 6 is facing towards the body.
2. Make sure the BCU 4 touches the wrist.
Button
LED
자신의 팔목에 맞게 길이 조절용 클립 D 을 조절하여 착용하세요.
7. Installation guide
Search for “Sgnl” in the Android Play Store or iOS App Store.
* Android Versions : Supported on 4.4 and above.
Recommended for 5.0 and above.
* iOS Versions : Supported on 8.0 and above, iPhone 5 and above,
and iPad 3 and above.
Download on the
App Store
GET IT ON
Google play
* Please refer to the Sgnl Homepage for details.
[Front] [Front]
6. Adjusting the length
Based on wrist size, extend or retract the length by using the Adjustable Length Clips D .
* The BCU 4 must touch the wrist with applied pressure. Make sure the strap is not too loose. * Note : If the BCU does not touch or lightly touch the wrist, the sound quality and /volume may be aected.
1. Check if the widths of the watch and the Watch connector B are the same.
2. Insert the Spring bar pin E into the Watch connector B .
3. Pull the Spring bar pin E to connect it with the watch and adjust on wrist accordingly.
1. Push the Apple watch connector C with the Apple watch.
2. Use either a 20mm or 24mm Watch connector B and connect to the Adjustable length clip D .
3. Insert the Spring bar pin E into the Watch connector B and pull to connect to the Apple Watch.
* The Apple watch connector C must be purchased separately.
1. Take o the Watch connector B to adjust the size.
2. The screw on the Watch Connector B is removed via the screwdriver G .
3. The Watch Connector B can be disconnected from the Adjustable Length Clip D by sliding it sideways.
4. The Adjustable Length Clips D can be added by sliding them.
5. Attach the Watch Connector B sliding it.
6. Fasten the watch connector B and Adjustable Length Clips D by using the screwdriver G to screw in the bolts.
6
3
Sold separately
WB-S50
WB-S50
011-18 0 0 3 7FCC ID : 2AOK2WB-S50
10. How to Charge
After purchasing, make sure the device is fully charged prior to use.
11-2. Device Reset (Device Initialization)
11-1. Device Restart
Safety Precautions
Please read and follow the safety instructions.
Waterproof and Dustproof Precautions
Specification
11. How to restart and reset the device
Please follow the steps below when switching to a new phone.
If the device does not respond during use, follow the steps below. Model Name WB-S50
3.7V 200mA Chargeable Lithium-ion Battery
5V 220mA
4.2, Class 1
2402 MHz ~ 2480 MHz
HFP
WARNING!
· Do not damage the battery or expose it to external forces.
· Please use the battery, accessories, and components in their intended manner.
· Make sure not to expose the charger, battery, or conductivity components to other elements (e.g. water, metal, etc.).
· Please contact customer service immediately if the product is broken or no longer working.
· Do not use the product while the battery is exposed.
The product can become damaged or cause bodily harm.
FCC (Federal Communications Commission)
· Keep the product away from infants and pets.
· The battery life may shorten in extremely hot or cold temperatures.
· Do not use the product near flammable areas.
· Store the product in a dry areas.
· Do not use the product outside during lightning or thunderstorms.
· Please follow road safety laws when using this product while driving.
This product is both waterproof and dustproof. Please read and adhere to the following precautions
regarding water/dustproof qualities.
The product may become damaged if the directions are not followed.
· Make sure the product does not come in contact with high water pressure.
· Do not wear the product while showering or swimming.
· If the product or hands are wet, wait until they are fully dried to use it.
· If wet, dry the product with a clean cloth. Rinse the product with clean water if it is wet and dirty and dry it o with
a clean cloth. Problems with its function and appearance may arise.
· Please take note that if dropped or exposed to external forces, the water/dustproof functions of the product may become damaged.
· If the microphone or speaker becomes wet, call quality may decrease.
Dry o the product with a clean cloth before resuming use.
· The water/dustproof qualities were tested in a controlled environment.
Any situation outside this setting may not guarantee its protection.
Product Warranty
Innomdle Lab provides a product warrantyy for consumer item damage, exchanges, and refunds based
on the statement below.
· The product warranty will be oered as written in the warranty statements.
· A warranty will be in eect on the day of purchase but must receive the date of purchase entry.
· Innomdle Lab is not responsible for any repairs, exchanges, or refunds until the flawed product is returned.
Contact customer service if the product becomes broken.
The consumer is responsible for all distribution costs except for any faulty components during the final transaction..
· Warranty : The warranty starts from the date of purchase. Please keep your transaction receipt.
If the purchase date cannot be confirmed, the warranty will last 3 months from the year
when the product was created.
Product Name
Name Tel
Address
Date of Purchase
Serial No.
Customer
Information
Battery
Input Power
Version
Profile
Bluetooth
Service Charge Announcement
· Products broken due to the consumer’s negligence include:
· Usage of parts not initially included in the package
· Damage due to falls
· Misuse of any component related to the adapter
· Attempting to fix the product at uncertified locations
· Damage due to gross alterations of the product
· Other Circumstances Include:
· Natural disasters (e.g. fire, flood, lightning, etc.)
· Purchasing used products or oering the product to others
· Exceeding the life of the warranty
Service Announcement
· If the product breaks within 1 -year of purchase (free warranty) during normal use,
it will be repaired free of charge.
· If the product is defective within 30 days after the purchase date, it will be exchanged with an
identical model to the one originally purchased.
WB-S50
*The location indicated above is where the battery is loaded.
Be careful not to damage the battery or expose it to external forces.
21
3
6
1. Press the side button on the Charger I to open the cover.
2. Match the side spacing of the Charger I with the volume buttons.
3. After closing the Charger I , check the LED 6 to confirm that the device is charging.
1. Press the Button 3 and Volume buttons 1 , 2 simultaneously for 7 seconds.
2. Release the buttons when the LED 6 alternate back and forth from the first light to the last light.
3. Press the Button 3 to turn on the device.
1. Press Volume buttons 1 , 2 simultaneously for 3 seconds.
2. Release the buttons when the LED 6 turn o one by one.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonalble protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technical for help.
WARNING : This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with Part 15 of the FCC’s Rules. Operation is subject to the
following two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
case undesirable operation.
FCC RF Exposure Information
This equipment complies with FCC RF exposure limit requirements set for in an uncontrolled environment.
Transmission
Frequency