Innovative Concepts and Design UHF-02 Wireless Receiver User Manual 1
INNOVATIVE CONCEPTS AND DESIGN LLC Wireless Receiver 1
15_UHF-02 UserMan.pdf
UHF-02 WIRELESS RECEIVER
5. Antenna
6. Mixed 1/4" unbalanced output jack
7. DC input jack
14
23 3
456 7 5
Operation
Parts Description
1. Power Indicator
2. ON/OFF Switch
RF Indicator3.
4. Volume Control
1. Connect one end of supplied 6.35mm to 6.35mm plug audio cable into AF
OUT jack on rear panel of the receiver. Connect the other end of the audio
cable into "MIC IN" or "AUX IN" of amplifier or mixer.
2. Connect DC plug of supplied AC/DC adapter to DC INPUT jack on rear panel
of the receiver. Connect AC plug of AC/DC adapter to mains power socket.
3. Press ON/OFF button on front panel to turn on the receiver.
4. Turn on the transmitter. RF indicator on receiver will light.
5. Adjust receiver volume and your amplifier or mixer volume to suitable level.
Frequency Range
Frequency Stability: ≤ 0.005%
Sensitivity: -100dBm
Mirror Image Rejection: ≥45 dB
S/N: ≥95dB
Distortion: ≤0.5%
Audio Output Level: ≤1V(10K)
Power Supply: DC12V/200MA
Specifications
Front Rear
: 517.6MHz + 521.5MHz or 533.7MHz + 537.2MHz
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.