Innovative Concepts and Design UHF-6000HHM-R2 Wireless Microphone User Manual
Innovative Concepts and Design LLC Wireless Microphone
User manual
UHF-6000HHM WIRELESS MICROPHONE Parts Description 1. Interchangeable microphone head 2. Power / Infrared(IR) /Mute indicator: Green-ready; Orange-mute on; Flashing orange-IR transmission in process 3. LCD screen: display group, channel number and battery power. 4. On-off / mute switch: Press and hold 1~2 seconds to turn microphone on or off. Press shortly to mute/unmute. 5. Select switch: To set up transmitter manually. 6. Battery cover/compartment 7. IR port: Receives infrared beam from receiver to synchronize frequencies. Automatic Setup 1. Turn on the microphone. 2. Open battery cover to display the infrared (IR) port. 3. Point microphone IR port to receiver IR sensor. 4. Press “SYNC” button on receiver. Antenna signal will display in receiver screen. 5. Close the battery cover. Be sure that only one microphone IR port is exposed when synchronizing a system. Manual Setup You can set up microphone group and channel manually also. 1. Press and hold the “SELECT” button until GROUP and CHANNEL displays begin to alternate. 2. To change the group setting, release the “SELECT” button while GROUP is displayed. While GROUP is flashing, press “SELECT” button to increase the group number by one. 3. To change the channel setting, release the “SELECT” button while CHANNEL is displayed. While CHANNEL is flashing, press “SELECT” button to increase the channel number by one. Specifications Frequency Range: 512~537.5MHz Frequency Stability: 10ppm Transmitting power: 10mW Spurious emission: <-40dB Modulation: FM Max modulation: 75K Power supply: 3V (2 AA batteries) Current consumption: 120mA NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : info Create Date : 2018:11:01 15:45:35+08:00 Modify Date : 2018:11:07 10:59:57+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : info Title : UHF-6000系列英文说明书-X6.cdr Creator Tool : CorelDRAW X8 Metadata Date : 2018:11:07 10:59:57+08:00 Producer : Corel PDF Engine Version 18.0.0.448 Document ID : uuid:3c9d665c-1e18-40a6-97ae-ef2127cad6bd Instance ID : uuid:ffff4308-471e-4a79-aecf-27fe3a58d012 Page Count : 2 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools