Innovative Concepts and Design UHF-6000HHM Wireless Microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2693606
Application ID	L7fiiI4c2q8O2P44O8uAMg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.83kB (260373 bits)
Date Submitted	2015-07-27 00:00:00
Date Available	2015-07-27 00:00:00
Creation Date	2015-07-06 15:55:21
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2015-07-21 11:25:11
Document Title	UHF-6100,6200英文说明书-中性
Document Creator	CorelDRAW
Document Author:	Administrator

UH F MULTI CHANNELS
WIRELESS MICROPHONE SYSTEM
USER'S MANUAL
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
INTRODUCTION
Thank you for choosing our UH F multi channels wireless
microphone system. Your new system is rugged, reliable, easy to set up
and operate, and produces outstanding audio clarity. Whether you're a
vocalist, guitarist or instrumentalist, this wireless system will show you
how easy wireless can be, and how good wireless can sound. This user
guide included with your system will tell you all you need to know to get
your system working right away.
FEATURES
1. Microcomputer controlle d synthesized oscillation circuit.
2. UHF high band with multi selectable frequencies.
3. Automatic transmitter setup.
4. Adopt high sensitivity and wide frequency response dynamic capsule
to reproduce original sound.
5. Advanced compression circuit to avoid noise.
6. LCD display for easy operation.
7. Operating range is about 60M.
-1-
RECEIVER PARTS DESCRIPTION
Single Channel
3 4 5
3 4 5 7
Front
10
11
12
Rear
Dual Channels
81
7 3 4 5
Front
10
11
12
Rear
1. On/Off switch: Turn on/off the receiver.
2. Infrared (IR) port: Broadcasts IR signal to transmitter to synchronize
frequencies.
3. Menu switch: Press to scroll through menu options.
4. Select switch: Press to select the currently displayed menu option.
5. Sync Button: Press to initiate IR connection between receiver and
transmitter.
6. LCD display: display group, channel no, RF and AF level.
7. Volume control: Turn to adjust volume.
8. Antenna connector: To install supplied antenna here.
9. Individual Balanced XLR output
10. Mixed 1 / 4 " output jack
11. MIC/LINE switch
12. DC input jack
-2-
HANDHELD MICROPHONE PARTS DESCRIPTION
UHF-6000HHM
FCC ID:2AE6GUHF-6000HHM
1. Interchangeable microphone head
2. Power / Infrared(IR) /Mute indicator: Green-ready; Orange-mute on;
Flashing orange-IR transmission in process
3. LCD screen: display group, channel number and battery power.
4. On-off / mute switch: Press and hold 1~2 seconds to turn microphone
on or off. Press shortly to mute or unmute.
5. Select switch: To set up transmitter channel manually.
6. Battery cover/compartment
7. IR port: Receives infrared beam from receiver to synchronize
frequencies.
-3-
RECEIVER
PROGRAMMING
SYSTEM
SETUP
Note: Transmitting devices such as cellular phones and two-way radios
may interfere with wireless audio transmissions. Keep your transmitters
and receivers away from these and other potential sources of
interference.
1. Turn on receiver. LCD will light.
2. Channel A set up
Group Selection
1. Press CH-A “MENU” button to move cursor to
“GROUP SELECT”.
2. Press CH-A “SELECT” button to increase the
group number by one.
3. When the correct group is displayed, either wait
five seconds for the screen to time out, or press
CH-A “SYNC” button.
Channel Selection
1. Press CH-A “MENU” button again to move cursor
to “CHANNEL SELECT” .
2. Then press CH-A “SELECT” button to increases
the channel number by one.
3.When the correct channel is displayed, either wait
five seconds for the screen to time out, or press
CH-A “SYNC” button.
Automatic Transmitter Setup
1. Turn on the first transmitter.
2. Open transmitter battery cover to display the infrared (IR) port.
3. Point transmitter IR port to receiver IR sensor.
4. Press “SYNC” button on receiver. CH-A
antenna signal will display in receiver screen.
Now channel A is ready.
5. Close the transmitter battery cover.
3. Channel B set up
Follow the same steps as described in step 2, press CH-B buttons
to set up Channel B.
Be sure that only one transmitter IR port is exposed when
synchronizing a system.
-4-
MANUAL SETUP OF TRANSMITTER FREQUENCY
You can set up transmitter frequency manually also.
1. Press and hold the “SELECT” button until
GROUP and CHANNEL displays begin to
alternate.
2. To change the group setting, release the
“SELECT” button while GROUP is displayed.
While GROUP is flashing, press “SELECT”
button to increase the group number by one.
3. To change the channel setting, release the
“SELECT” button while CHANNEL is displayed.
While CHANNEL is flashing, press “SELECT”
button to increase the channel number by one.
SPECIFICATIONS
RECEIVER
Frequency Range: USA : 682~694.75MHz
Frequency Stability：10ppm
Sensitivity: 13dBuV
Adjacent channel rejection：75dB
Image rejection: 95dB
Audio Output：200MV
Output Impedance: XLR connector: 200 ; 1 / 4 inch connector: 1k
S/N ratio: 100dB
Total Harmonic Distortion: < 0.1%
Frequency response: 50Hz-15KHz
Operating Range :100m( in line and sight area)
Power supply: DC12V/500mA
TRANSMITTER
Frequency Range: USA : 682~694.75MHz
Frequency Stability: 10ppm
Transmitting power: 7.26 mW
Spurious emission: >65dB
Modulation: FM
Max modulation: 75K
Power supply: 3V (2 AA batteries)
Current consumption: 120mA
-5-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The device meets RF Exposure requirements without any restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2015:07:06 15:55:21+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2015:07:21 11:25:11+08:00
Metadata Date                   : 2015:07:21 11:25:11+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : UHF-6100,6200英文说明书-中性
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:45066449-7bae-412c-8447-2ed46c594613
Instance ID                     : uuid:7361685c-342e-459f-a0d9-c85433cc82b8
Page Count                      : 7
Author                          : Administrator

EXIF Metadata provided by EXIF.tools