Innovative Concepts and Design UHF-6200-R2 Wireless Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4105971
Application ID	hSk+y8rOkzu043XWVVMUJw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.44kB (443000 bits)
Date Submitted	2018-12-14 00:00:00
Date Available	2018-12-14 00:00:00
Creation Date	2018-11-01 15:45:35
Producing Software	Corel PDF Engine Version 18.0.0.448
Document Lastmod	2018-11-07 11:04:13
Document Title	UHF-6000系列英文说明书-X6.cdr
Document Creator	CorelDRAW X8
Document Author:	info

UHF-6200 WIRELESS RECEIVER
81
7 3 4 5
3 4 5 7
Front
10
11
12
Rear
Parts Description
1. On/Off switch: Turn on/off the receiver.
2. Infrared (IR) port: Broadcasts IR signal to transmitter to synchronize
frequencies.
3. Menu switch: Press to scroll through menu options.
4. Select switch: Press to select the currently displayed menu option.
5. Sync Button: Press to initiate IR connection between receiver and
transmitter.
6. LCD display: display group, channel no, RF and AF level.
7. Volume control: Turn to adjust volume.
8. Antenna connector: To install supplied antenna here.
9. Individual Balanced XLR output
10. Mixed 1 / 4 " output jack
11. MIC/LINE switch
12. DC input jack
Specifications
Frequency Range: 512~537.5MHz
Frequency Stability: 10ppm
Sensitivity: 13dBuV
Adjacent channel rejection：75dB
Image rejection: 95dB
Audio Output：200MV
Output Impedance: XLR connector: 200 ; 1 / 4 inch connector: 1k
S/N ratio: 100dB
Total Harmonic Distortion: < 0.1%
Frequency response: 50Hz-15KHz
Operating Range :60m( in line and sight area)
Power supply: DC12V/500mA
Receiver Programming
Note: Transmitting devices such as cellular phones and two-way radios
may interfere with wireless audio transmissions. Keep your transmitters
and receivers away from these and other potential sources of
interference.
1. Turn on receiver. LCD will light.
2. Channel A set up
Group Selection
a. Press CH-A “MENU” button to move cursor to “GROUP SELECT”.
b. Press CH-A “SELECT” button to increase the group number by one.
c. When the correct group is displayed, either wait five seconds for the screen
to time out, or press CH-A “SYNC” button.
Channel Selection
a. Press CH-A “MENU” button again to move cursor to “CHANNEL SELECT” .
b. Then press CH-A “SELECT” button to increase the channel number by one.
c. When the correct channel is displayed, either wait five seconds for the screen
to time out, or press CH-A “SYNC” button.
3. Channel B set up
Follow the same steps as described in step 2, press CH-B buttons to set up
Channel B.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : info
Create Date                     : 2018:11:01 15:45:35+08:00
Modify Date                     : 2018:11:07 11:04:13+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : info
Title                           : UHF-6000系列英文说明书-X6.cdr
Creator Tool                    : CorelDRAW X8
Metadata Date                   : 2018:11:07 11:04:13+08:00
Producer                        : Corel PDF Engine Version 18.0.0.448
Document ID                     : uuid:72f47689-e43d-49a7-a168-5ff0a3773cdf
Instance ID                     : uuid:907b6c54-f075-41c8-ae6f-72c775f48896
Page Count                      : 2
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools